What Did You Do With Your Truck Today ? - Page 55 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

_Ogre · 11-20-2012, 06:33 PM

drove mine to bfeast
looks like cold weather is coming next week
i'll put it away for salt season

mknittle · 11-20-2012, 09:41 PM

I ground some of my welds smooth on my frame.

48 pickup · 11-23-2012, 03:36 PM

Looks sweet
Nice job
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

OrrieG · 11-23-2012, 03:42 PM

Finished fab and tacked in the gas fill door.

mknittle · 11-24-2012, 05:18 PM

i am glad to see more sixes being built

Daze57 · 11-24-2012, 10:17 PM

lookin v v nice

Highsider · 11-25-2012, 11:02 AM

Steering wheel project:
http://67-72chevytrucks.com/vboard/s...=541904&page=5

On page 5, if it gets lost.

**arturo7** · 11-25-2012, 12:49 PM

Picked up a front disc brake kit from ABS in Orange, CA.

**Dan in Pasadena** · 11-25-2012, 07:45 PM

Quote:

Originally Posted by arturo7

Picked up a front disc brake kit from ABS in Orange, CA.

ABS? Can you provide more info on this local (to me/us) source?

**arturo7** · 11-26-2012, 12:00 AM

Quote:

Originally Posted by Dan in Pasadena

ABS? Can you provide more info on this local (to me/us) source?

http://www.abspowerbrake.com/

They were highly recommended by a guy who has restored many vehicles.

1953chevyroc · 11-25-2012, 08:42 PM

Well, on the four day weekend I got the front fenders, bumper, radiator support and hood hinges off and took out the seat. Found an abandoned mouse nest and a dead mouse under the seat and cleaned up the interior with a vacuum.

Amorget · 11-25-2012, 11:40 PM

Went to Pick-N-Pull and the wife and I pulled a set of Cadillac Catera seats for her truck. They say they are made by Recaro. Super comfy, classic looks to them for being modern bucket seats. She originally wanted bench seats until she saw these.

**Dan in Pasadena** · 11-26-2012, 01:57 AM

Thanks Arturo,
Very interesting reading in their catalog.

mknittle · 11-26-2012, 10:07 PM

Abs=absolute bull s##t

stodd16 · 11-26-2012, 10:31 PM

Picked my truck up from the blasters after my pos body guy left it there to rot for 2 months. Time to take matters into my own hands
Posted via Mobile Device

Kabwe · 11-29-2012, 03:15 PM

Quote:

Originally Posted by stodd16

Picked my truck up from the blasters after my pos body guy left it there to rot for 2 months. Time to take matters into my own hands

Oh man I know too many stories that are similar and even worst than yours. Its sad, but you simply can't trust a lot of guys to do what they say now days. The my word is my bond thing is fading into a thing of the past. Not with me though my word is my bond that's why I'm not quick to say I will do something.lol

**Dan in Pasadena** · 11-29-2012, 03:22 PM

Quote:

Originally Posted by Kabwe

... Not with me though my word is my bond that's why I'm not quick to say I will do something.lol

Which is why you've never told me you'd do a damn thing for me!

I'm kidding, I'm KIDDING!!

So what's the latest on your truck, Bam? Been kinda quiet on your thread lately.

hotrod1 · 11-29-2012, 03:47 PM

They call it PAINT PRISON. Where is your car? It is in paint prison.

Once it is there, you have a very hard time getting it out. May take a pardon from the governor.

solidaxel · 11-29-2012, 10:58 PM

Quote:

Originally Posted by hotrod1

They call it PAINT PRISON. Where is your car? It is in paint prison.

Once it is there, you have a very hard time getting it out. May take a pardon from the governor.

And you know what comes after that .............upholstry Jail !!!!

Kabwe · 11-30-2012, 04:48 PM

Quote:

Originally Posted by Dan in Pasadena

Which is why you've never told me you'd do a damn thing for me!

I'm kidding, I'm KIDDING!!

So what's the latest on your truck, Bam? Been kinda quiet on your thread lately.

Not much buddy, but I'm doing what I can when I find time. The latest thing I've done was buy some drilled and slotted rotors and painted the suspension parts and install them for the last time hopefully.lol

mknittle · 11-30-2012, 05:50 PM

Quote:

Originally Posted by Kabwe

Not much buddy, but I'm doing what I can when I find time. The latest thing I've done was buy some drilled and slotted rotors and painted the suspensions and install the for the last time hopefully.lol

Last time

LOOKIN good man!

Chevette · 11-30-2012, 08:25 PM

Quote:

Originally Posted by Kabwe

Not much buddy, but I'm doing what I can when I find time. The latest thing I've done was buy some drilled and slotted rotors and painted the suspension parts and install them for the last time hopefully.lol

Last time? Did you hear that, he said last time? Hahahaha......Ya right

. Ok Kabwe, now that you have me in a real good mood, do you have any more funny jokes?

mknittle · 11-29-2012, 09:46 PM

Quote:

Originally Posted by Kabwe

Oh man I know too many stories that are similar and even worst than yours. Its sad, but you simply can't trust a lot of guys to do what they say now days. The my word is my bond than is fading into a thing of the past. Not with me though my word is my bond that's why I'm not quick to say I will do something.lol

I would give you the thumbs up but i cant find the button

i get myself into things tha way too. The problem is I have a talent for finding the ones with the most oddball one off projects.

stodd16 · 11-29-2012, 10:19 PM

Started to acid etch the metal after the sand blasters. And ordered all the cowl area patch panels planning on getting it in primer this weekend and then start the patch work
Posted via Mobile Device

Daze57 · 11-27-2012, 05:08 AM

stodd

i feel for ya dude - my 1st body guy left me hangin for a year - finally took a truck;w/a trailer and 2 big friends to get it out of his shop - luckily i was able to get all my parts back some in primer -some not - but had the best coat of desert dust i had ever seen - good luck w/ your project

11-20-2012, 06:33 PM	#1
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,677	Re: What Did You Do With Your Truck Today ? drove mine to bfeast looks like cold weather is coming next week i'll put it away for salt season __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

11-20-2012, 09:41 PM	#2
mknittle Registered User Join Date: Jul 2011 Location: Auburn ca. Posts: 2,886	Re: What Did You Do With Your Truck Today ? I ground some of my welds smooth on my frame. __________________ Mark My GMC build. http://67-72chevytrucks.com/vboard/s...d.php?t=536602

11-23-2012, 03:36 PM	#3
48 pickup Registered User Join Date: Nov 2012 Location: Devon UK Posts: 25	Re: What Did You Do With Your Truck Today ? Looks sweet Nice job Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device

11-23-2012, 03:42 PM	#4
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: What Did You Do With Your Truck Today ? Finished fab and tacked in the gas fill door. Attached Images __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

11-24-2012, 05:18 PM	#5
mknittle Registered User Join Date: Jul 2011 Location: Auburn ca. Posts: 2,886	Re: What Did You Do With Your Truck Today ? i am glad to see more sixes being built __________________ Mark My GMC build. http://67-72chevytrucks.com/vboard/s...d.php?t=536602

11-24-2012, 10:17 PM	#6
Daze57 Registered User Join Date: Jul 2011 Location: Las Vegas - Nev. aka Sin City Posts: 1,835	Re: What Did You Do With Your Truck Today ? lookin v v nice

11-25-2012, 11:02 AM	#7
Highsider Registered User Join Date: Jun 2012 Location: Southern Iowa Posts: 944	Re: What Did You Do With Your Truck Today ? Steering wheel project: http://67-72chevytrucks.com/vboard/s...=541904&page=5 On page 5, if it gets lost.

11-25-2012, 12:49 PM	#8
arturo7 Senior Member Join Date: Jul 2012 Location: huntington beach Posts: 845	Re: What Did You Do With Your Truck Today ? Picked up a front disc brake kit from ABS in Orange, CA. __________________ ever forward build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=542073

11-25-2012, 08:42 PM	#11
1953chevyroc Registered User Join Date: Oct 2011 Location: Hastings Nebraska Posts: 28	Re: What Did You Do With Your Truck Today ? Well, on the four day weekend I got the front fenders, bumper, radiator support and hood hinges off and took out the seat. Found an abandoned mouse nest and a dead mouse under the seat and cleaned up the interior with a vacuum.

11-25-2012, 11:40 PM	#12
Amorget Registered User Join Date: Feb 2012 Location: Camano Island, WA Posts: 166	Re: What Did You Do With Your Truck Today ? Went to Pick-N-Pull and the wife and I pulled a set of Cadillac Catera seats for her truck. They say they are made by Recaro. Super comfy, classic looks to them for being modern bucket seats. She originally wanted bench seats until she saw these.

11-26-2012, 01:57 AM	#13
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,336	Re: What Did You Do With Your Truck Today ? Thanks Arturo, Very interesting reading in their catalog.

11-26-2012, 10:07 PM	#14
mknittle Registered User Join Date: Jul 2011 Location: Auburn ca. Posts: 2,886	Re: What Did You Do With Your Truck Today ? Abs=absolute bull s##t __________________ Mark My GMC build. http://67-72chevytrucks.com/vboard/s...d.php?t=536602

11-26-2012, 10:31 PM	#15
stodd16 Registered User Join Date: Jan 2007 Location: pa Posts: 32	Re: What Did You Do With Your Truck Today ? Picked my truck up from the blasters after my pos body guy left it there to rot for 2 months. Time to take matters into my own hands Posted via Mobile Device

11-29-2012, 03:47 PM	#18
hotrod1 56 - autocross Join Date: Apr 2010 Location: Camarillo, Ca Posts: 1,121	Re: What Did You Do With Your Truck Today ? They call it PAINT PRISON. Where is your car? It is in paint prison. Once it is there, you have a very hard time getting it out. May take a pardon from the governor.

11-29-2012, 10:19 PM	#24
stodd16 Registered User Join Date: Jan 2007 Location: pa Posts: 32	Re: What Did You Do With Your Truck Today ? Started to acid etch the metal after the sand blasters. And ordered all the cowl area patch panels planning on getting it in primer this weekend and then start the patch work Posted via Mobile Device



Register or Log In To remove these advertisements.

11-27-2012, 05:08 AM	#25
Daze57 Registered User Join Date: Jul 2011 Location: Las Vegas - Nev. aka Sin City Posts: 1,835	Re: What Did You Do With Your Truck Today ? stodd i feel for ya dude - my 1st body guy left me hangin for a year - finally took a truck;w/a trailer and 2 big friends to get it out of his shop - luckily i was able to get all my parts back some in primer -some not - but had the best coat of desert dust i had ever seen - good luck w/ your project

Register or Log In To remove these advertisements.