Daverods project 66 - Page 56 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ruffrida2005 · 01-12-2011, 07:16 PM

Quote:

Originally Posted by scotts62

thats just wrong

You need to take a look at your Avatar.

Those unibits do suck though. I bought the 3pc kit. and broke all 3 drilling through my frame. didn't know I could take them back.

scotts62 · 01-12-2011, 07:19 PM

Quote:

Originally Posted by ruffrida2005

You need to take a look at your Avatar.

Those unibits do suck though. I bought the 3pc kit. and broke all 3 drilling through my frame. didn't know I could take them back.

Thanks for reminding me about the avatar, forgot what it said

daverod · 01-12-2011, 07:26 PM

Quote:

Originally Posted by ruffrida2005

You need to take a look at your Avatar.

Those unibits do suck though. I bought the 3pc kit. and broke all 3 drilling through my frame. didn't know I could take them back.

You would think you would learn to go slow after u broke the first one.

ruffrida2005 · 01-13-2011, 12:20 PM

Are you a insider club member, if not You need to get in on it. Cost I think $25 and you can save a lot of money. Some stuff goes 50%-70% just for being a member.

daverod · 01-13-2011, 06:02 PM

I'll have to check it next time I'm in there.

Should be in a couple hours or so.

bubba327 · 01-13-2011, 09:27 PM

I get in A LOT of trouble at HF. I start in shopping and pretty quick I have a cart or two full of stuff I cannot live without.
I live probably 25 miles away from the store and since I do not get on that side of town that often, I tend to stock up on essentials when I am there.

Mainly stuff like grinder discs and cut-off wheels and wire brushes, air tools and pretty quick I am in deep dept again.
Much Safer if I do not go too often.

ruffrida2005 · 01-13-2011, 10:13 PM

Inside track club member. You get stuff a lot cheaper.

Strodder · 01-13-2011, 10:39 PM

When you get the paper with all the sales on it, you have to bring that coupon with you.

daverod · 01-14-2011, 12:55 AM

Quote:

Originally Posted by Strodder

When you get the paper with all the sales on it, you have to bring that coupon with you.

Got it.

daverod · 01-14-2011, 12:59 AM

Mounted some stuff up. Got my pressure sensor, did'nt have the right fitting.

I was hoping to go up and down.

Guess I'll have to mount a 5 gal bucket on there somewhere.

Need to get my other truck back together so I can get it out of there and get my cab on. Where are my shocks.

Strodder · 01-14-2011, 10:29 AM

I hope your not expecting fast bags using 1/4" air lines? What size valves are you using?

ruffrida2005 · 01-14-2011, 11:33 AM

I'm on facebook.

Dave get to work and get it done.

Dennis you just missed a good deal on AVS. I bought a 480C dual pack, 5gal 9port tank, 1/2 line, 5/32 line, and a bunch of fittings shipped to my house for $400 even. That's the price of the dual pack by itself.

Strodder · 01-14-2011, 12:08 PM

Dave, I got a message from your wife's FB account. That was you, right?

daverod · 01-14-2011, 03:03 PM

Quote:

Originally Posted by Strodder

Hey Dave are you on Face Book?

Did it have a picture of a good looking dog? Don't read what she says about me. None of it's true. I'll open my own account later.

Strodder · 01-14-2011, 03:31 PM

Quote:

Originally Posted by daverod

Did it have a picture of a good looking dog? Don't read what she says about me. None of it's true. I'll open my own account later.

Yes, was that you???

Strodder · 01-14-2011, 03:34 PM

Dennis you just missed a good deal on AVS. I bought a 480C dual pack, 5gal 9port tank, 1/2 line, 5/32 line, and a bunch of fittings shipped to my house for $400 even. That's the price of the dual pack by itself.

That is a good deal. I shouldn't spend that much to get the rest of what I need though.

daverod · 01-14-2011, 03:35 PM

yes it was me.

daverod · 01-14-2011, 03:04 PM

Quote:

Originally Posted by ruffrida2005

I'm on facebook.

Dave get to work and get it done.

Dennis you just missed a good deal on AVS. I bought a 480C dual pack, 5gal 9port tank, 1/2 line, 5/32 line, and a bunch of fittings shipped to my house for $400 even. That's the price of the dual pack by itself.

Paul If I did'nt have to get to work I might get it done. I of these days I'll run out of work and I'll be able to get more done on my truck.

Usally when that happens I also run out of $$$.

ruffrida2005 · 01-14-2011, 09:59 PM

Man I hate that J word.

If yall want to add me to facebook it's Paul Royar.

Dave if you go online to the insider section. They have a huge list. I thought I saw the blasting cabs on it. And should be good till next month.

Strodder · 01-14-2011, 10:54 PM

Paul which one are you. There is 2 Paul Royar's

ruffrida2005 · 01-14-2011, 11:30 PM

I have a pic of my 2 boys. 1 in a black shirt and the other in blue shirt.

daverod · 01-15-2011, 12:03 AM

up and down and back up again.

Guess where I been for the last hour.

Strodder · 01-15-2011, 12:06 AM

Quote:

Originally Posted by daverod

up and down and back up again.

Guess where I been for the last hour.

Looks like a dune buggy.

daverod · 01-15-2011, 12:09 AM

If I could start it I would take it for a drive.

watahyahknow · 01-15-2011, 06:06 AM

Quote:

Originally Posted by daverod

up and down and back up again.

Guess where I been for the last hour.

ahum

YouTube - Chris Riding Bouncing Cars at...

01-13-2011, 12:20 PM	#4
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 Are you a insider club member, if not You need to get in on it. Cost I think $25 and you can save a lot of money. Some stuff goes 50%-70% just for being a member. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-13-2011, 06:02 PM	#5
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I'll have to check it next time I'm in there. Should be in a couple hours or so. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

01-13-2011, 09:27 PM	#6
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 I get in A LOT of trouble at HF. I start in shopping and pretty quick I have a cart or two full of stuff I cannot live without. I live probably 25 miles away from the store and since I do not get on that side of town that often, I tend to stock up on essentials when I am there. Mainly stuff like grinder discs and cut-off wheels and wire brushes, air tools and pretty quick I am in deep dept again. Much Safer if I do not go too often. __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

01-13-2011, 10:13 PM	#7
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 Inside track club member. You get stuff a lot cheaper. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-13-2011, 10:39 PM	#8
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 When you get the paper with all the sales on it, you have to bring that coupon with you. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

01-14-2011, 12:59 AM	#10
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Mounted some stuff up. Got my pressure sensor, did'nt have the right fitting. I was hoping to go up and down.Guess I'll have to mount a 5 gal bucket on there somewhere. Need to get my other truck back together so I can get it out of there and get my cab on. Where are my shocks. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 01-14-2011 at 01:06 AM.

01-14-2011, 10:29 AM	#11
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 I hope your not expecting fast bags using 1/4" air lines? What size valves are you using? __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

01-14-2011, 11:33 AM	#12
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 I'm on facebook. Dave get to work and get it done. Dennis you just missed a good deal on AVS. I bought a 480C dual pack, 5gal 9port tank, 1/2 line, 5/32 line, and a bunch of fittings shipped to my house for $400 even. That's the price of the dual pack by itself. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-14-2011, 12:08 PM	#13
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Dave, I got a message from your wife's FB account. That was you, right? __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

01-14-2011, 03:34 PM	#16
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Dennis you just missed a good deal on AVS. I bought a 480C dual pack, 5gal 9port tank, 1/2 line, 5/32 line, and a bunch of fittings shipped to my house for $400 even. That's the price of the dual pack by itself. That is a good deal. I shouldn't spend that much to get the rest of what I need though. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT* Last edited by Strodder; 01-14-2011 at 03:35 PM.

01-14-2011, 03:35 PM	#17
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 yes it was me. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

01-14-2011, 09:59 PM	#19
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 Man I hate that J word. If yall want to add me to facebook it's Paul Royar. Dave if you go online to the insider section. They have a huge list. I thought I saw the blasting cabs on it. And should be good till next month. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-14-2011, 10:54 PM	#20
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Paul which one are you. There is 2 Paul Royar's __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

01-14-2011, 11:30 PM	#21
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 I have a pic of my 2 boys. 1 in a black shirt and the other in blue shirt. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

01-15-2011, 12:03 AM	#22
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 up and down and back up again. Guess where I been for the last hour. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"



Register or Log In To remove these advertisements.

01-15-2011, 12:09 AM	#24
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 If I could start it I would take it for a drive. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

Register or Log In To remove these advertisements.