![]() |
|
![]() |
#1 |
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 Chevy CST aka "the loud truck"
Well front bled out but the rear is putting up a fight still I got the back passenger to bleed just fluid 3 times in a row a couple times but the back driver won't go and once I go back to the passenger it has air too... Going to try a couple things and maybe just try it a little more since I did open up the lines quite a bit to put on new parts... So we'll see CPP is having free shipping so I'm going Togo ahead and take advantage of that and get the rest of my parts ordered from them as well.
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: 1967 Chevy CST aka "the loud truck"
I'm guessing you are using the two person method, here are some tips to help you out.
Get a helper to pump the brake until the pedal is at maximum resistance then hold the brake pedal down while you release the valve and let out the air. Repeat this step until you are sure there is no more air in the line. The trick here is to get a tight fitting hose to slip over the valve with the other end in a tall skinny bottle of brake fluid so no air can get into the system. If it is being stubborn you can use a sand or rubber hammer to strike the caliper before you release the valve to force air bubbles out. Once you are done bleeding the system you can use a funnel and a coffee filter to put the unused brake fluid back into the main bottle. Last edited by Xeen; 08-07-2014 at 10:53 AM. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2009
Location: A****er, CA
Posts: 5,594
|
Re: 1967 Chevy CST aka "the loud truck"
Ricky???? Did the truck that you said would "never ever ever" get lowered,....... just get lowered?????
![]() ![]() ![]() Looks good, hope to see you on C/10/4/14 ![]()
__________________
C/10 Rene 1966 Short Fleet "The Hag" 1967 CST Short Fleet "Dark Poly" 1971 Short Fleet 1970 Jimmy Custom 2 WD "Golden Ticket" 1972 Blazer 2 WD "Retro Blaze" |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 Chevy CST aka "the loud truck"
Looks like I wasn't counting on the future rickey to get very "hot rod" influenced haha. Means a lot coming from you Rene! And I'll be bringing it to the get together like always!
|
![]() |
![]() |
![]() |
#5 |
Proprietor of Dale's Corner
![]() Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,083
|
Re: 1967 Chevy CST aka "the loud truck"
Hey who are you and what did ya do with Rick? !!!! LOL
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 Chevy CST aka "the loud truck"
Shhhh I'm hoping nobody notices he's gone haha
Well I did some research on pinion angles and I was under the assumption you couldn't have the driveline level... But turns out the pinion and trans have to have matching angles and all is well and my pinion and trans have matching angles so I didn't bother with the switch. I did take out the 3 rivets (6 total for both passenger and driver sides) for the coil/shock crossmember out that are on top of the frame rails; my reason for this is 1 rivet was completely loose the one next to it had a gap between the frame and the hat of the rivet and the other one had a gap on the inside portion of the frame so I figured I might as well do them all since there have already either been messed up or either were installed wrong. So I got them out and replaced with fresh grade 8 hardware. I'm going to order my deluxe trac bar kit and c notch kit from CPP within the next couple of days. Thinking about ordering there shock relocation brackets to. |
![]() |
![]() |
![]() |
#7 |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: 1967 Chevy CST aka "the loud truck"
Looking good Ricky! Good luck getting it bled out!
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
![]() |
![]() |
![]() |
#8 | |
Still Learning
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
|
Re: 1967 Chevy CST aka "the loud truck"
Quote:
This site is a bad influence. ![]() |
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 Chevy CST aka "the loud truck"
Just ordered my deluxe trac bar kit, c-notch kit and rear shock relocation brackets from CPP so should be getting those in a week... About to drop off my 67 caps to get chromed. As well. So more progress is soon to follow
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: 1967 Chevy CST aka "the loud truck"
Very nice, I have all those and they are all quality pieces.
|
![]() |
![]() |
![]() |
#11 |
Proprietor of Dale's Corner
![]() Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,083
|
Re: 1967 Chevy CST aka "the loud truck"
Keep the pics coming as you make progress..Did the brakes bleed ok?
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man |
![]() |
![]() |
![]() |
#12 | |
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 Chevy CST aka "the loud truck"
They look like some pretty good parts to me and everything I've bought so far installed fairly easy and was real simple so I'm expecting the same from these parts as well. I really like the fact that the trac bar is adjustable.
Quote:
Well today brings me some disappointing news.. First off I got a email from CPP saying the trac bar is on backorder, so I haven't any clue when that's going to make it here. Also today I pulled the truck out of the garage and I look on the floor and there's a skim coat of tranny fluid on the floor.. It's not just a couple spots, it's probably 1 foot by 2 feet in size.. So I've gotta find out what the heck happened. I wanted to wait til November or December maybe even January to put the 700r in but I'm thinking I may have to put it in already if the 350 keeps leaking. I'm gonna do some searching and see what's going on. |
|
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 Chevy CST aka "the loud truck"
Well..... I got a 5.3 LS with a 6 speed automatic today!
|
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: 1967 Chevy CST aka "the loud truck"
What the...
That's a huge shift from needing to fix a transmission leak. What the heck happened that made you want to blow thousands of dollars on a LS swap? Get ready for some serious financial pain this isn't going to be cheap. Last edited by Xeen; 08-30-2014 at 11:29 AM. |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 Chevy CST aka "the loud truck"
Well.... That's the thing it came wrapped in this very nice silver packaging...
|
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: 1967 Chevy CST aka "the loud truck"
![]() |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 Chevy CST aka "the loud truck"
Now the truck isn't actually my truck my mom and dad bought it, which is fine with me because I get to drive it and see how it drives and feels, but I still get to have my 67! I am in disbelief that there's a 2014 sitting in the driveway, I'm blown away!
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Jul 2010
Location: Hemet,Ca
Posts: 1,502
|
Re: 1967 Chevy CST aka "the loud truck"
Your truck is looking good as always. Yep those 2014 are awesome. I wanted to buy one but in a single cab shortbed but just to much dollars for me and not a real steady job to depend on. So just keeping the 01 silverado and the 61 c10 to tinker with.
__________________
Stovebolt-It is painted |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 Chevy CST aka "the loud truck"
Well lucky for us we got a 72-0 on the 14... I'm still in disbelief that there's no interest lol. Well even with the new truck around I'm still taking care of the 67.... Nothing can replace the 67! Was cleaning it a bit and I threw on the 67 caps for now.
|
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 Chevy CST aka "the loud truck"
I've got a situation here... I'm looking for new shocks in the rear but now that I've lowered it 5" in the rear I know I need 15-1/2" extended and 10" collapsed... But my problem is I've read a couple of build threads and I heard that cpp's black magic shocks are a little spongy and don't give the best ride... So I'm looking for a better shock with will give me a nice smooth ride but will be supportive for bumps and pot holes. Does anybody have a recommendation for a brand of shock, and the part numbers? Would really appreciate it!
|
![]() |
![]() |
![]() |
#21 | |
Registered User
Join Date: Jun 2010
Location: The Woodlands, Texas
Posts: 210
|
Re: 1967 Chevy CST aka "the loud truck"
Quote:
I dropped mine 5" in the rear as well... Read a thread on the forum somewhere that, stock front shocks are what you need for the 5" drop in the back... I picked up a pair on Monroe's off Amazon for about $30 shipped to the door... Slapped them on a while back and I haven't bottomed out yet... The ride isn't air bag smooth, but not too shabby either...
__________________
To the best of my knowledge there is still not a cure for stupid... And Stupid Hurts... Check out my build: http://67-72chevytrucks.com/vboard/s...d.php?t=427503 |
|
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 Chevy CST aka "the loud truck"
Perfect! Thank you! By the way your trucks coming along great I've been watching from Facebook side if the site!
|
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Aug 2012
Location: Topeka Kansas
Posts: 2,655
|
Re: 1967 Chevy CST aka "the loud truck"
I bought the Monroe Magnums for all 4 corners of mine but I haven't been able to drive it yet to tell you how it rides but they are a lot beefier than the regular Monroes.
|
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 Chevy CST aka "the loud truck"
Well when you do get the chance to test them out let me know, if they prove to give a nice ride for your truck then I'll follow and get them for the 67.
Well just got an email back from cpp (finally) that they sent out my order... Very confusing how this order worked out... I won't bore you guys with all the mumbo jumbo. So waiting for the parts to get here before I can make any kind of progress on the 67. Did get the shocks installed and the ride is much better. Would post a picture but we all know what shocks are and what they look like on the rear of our trucks so I'll report back when I have some more progress.... Until then I'll be under the hood of my sisters mustang.... |
![]() |
![]() |
![]() |
#25 | |
Proprietor of Dale's Corner
![]() Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,083
|
Re: 1967 Chevy CST aka "the loud truck"
Quote:
__________________
"Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|