1969 SuperBurb build-up (Bagged and Blown!) - Page 56 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

smbrouss70 · 03-14-2016, 04:07 PM

Let me pull up a chair and wait for the show to start....

**Palf70Step** · 03-14-2016, 06:27 PM

C10_ustacould · 03-14-2016, 11:35 PM

Hope y'all have picture in picture on your screens so you'll have something to watch in the meantime.

**Hart_Rod** · 03-15-2016, 01:26 PM

Quote:

Originally Posted by ChuckDriver

Looking good!

Thanks!

Quote:

Originally Posted by Dieselwrencher

Rob, it's looking great!

Thanks!

Quote:

Originally Posted by smbrouss70

Let me pull up a chair and wait for the show to start....

Sooooon,

Quote:

Originally Posted by Palf70Step

Quote:

Originally Posted by C10_ustacould

Hope y'all have picture in picture on your screens so you'll have something to watch in the meantime.

Funny guy.....

C10_ustacould · 03-15-2016, 08:49 PM

Quote:

Originally Posted by Hart_Rod

Funny guy.....

**Hart_Rod** · 03-19-2016, 08:54 PM

Ok, so I went out to work on the burb today. I hooked the battery up, my Viar air compressor kicked on and ran for about 3 minutes and shut off. Tried to air the rear bags up and nothing. Check the air tank and it was empty. Disconnected and reconnected the battery and once again, compressor runs but does not put any air in the tank. The compressor is brand new (5 years ago,

) and only has about 1 hr of run time. Really baffling that its running and not pumping any air at all. Any suggestions?

smbrouss70 · 03-19-2016, 09:22 PM

I don't know how it is around your area, but over here if you let something sit too long you will have dirt dauber nests clogging up everything. Make sure nothing is plugging up the intake of the compressor(s). Also, I would check any one-way check valves for stuck components. Dry rings on the piston of the compressor??? Just a few ideas...

BaggedBurban · 03-20-2016, 12:56 AM

As stated above I would look at the one way check valve.

**Hart_Rod** · 03-20-2016, 09:29 AM

Quote:

Originally Posted by smbrouss70

I don't know how it is around your area, but over here if you let something sit too long you will have dirt dauber nests clogging up everything. Make sure nothing is plugging up the intake of the compressor(s). Also, I would check any one-way check valves for stuck components. Dry rings on the piston of the compressor??? Just a few ideas...

Quote:

Originally Posted by BaggedBurban

As stated above I would look at the one way check valve.

The filter is good. It's very hard to see or get to, but it seems like its leaking by the compressor head. Where is the one-way check valve?

smbrouss70 · 03-20-2016, 12:17 PM

If you are using a Viair supplied leader hose off of the compressor, it will be on the end of the hose. Use the foreground of the pic as reference.

**Hart_Rod** · 03-20-2016, 06:50 PM

Quote:

Originally Posted by smbrouss70

If you are using a Viair supplied leader hose off of the compressor, it will be on the end of the hose. Use the foreground of the pic as reference.

Pulled the one-way check valve off, tapped on it a few times with a wrench, started the compressor up and WALA, we're back in business!!!! You guys rock,

!

BaggedBurban · 03-21-2016, 10:37 PM

Went through this last weekend, check valve was cracked. Bought a new one and fixed the air leak I have.

Now the passenger front is leaking, got to locate this leak too. Fun never ends...

**Hart_Rod** · 03-25-2016, 08:21 AM

Quote:

Originally Posted by BaggedBurban

Went through this last weekend, check valve was cracked. Bought a new one and fixed the air leak I have.

Now the passenger front is leaking, got to locate this leak too. Fun never ends...

I hear you!

fishnixon · 03-28-2016, 08:07 PM

I like the short box build. Nice detail and great craftsmanship. Keep up the good work. I think I have the perfect transport for it.

Rob

**Hart_Rod** · 03-29-2016, 08:32 AM

Quote:

Originally Posted by fishnixon

I like the short box build. Nice detail and great craftsmanship. Keep up the good work. I think I have the perfect transport for it.

Rob

Thanks Fish! Love your truck!

**Hart_Rod** · 04-06-2016, 12:04 PM

Well the 68 left for California a week ago. The new owner seems very pleased with the truck,

. Since the truck left, I have been cleaning/rearranging my garage and my shop. I'm also trying to figure out where I left off with the suburban and taking inventory of where I'm at. Hopefully I'll get a plan in place and get this build back on track.

lyrikz · 04-06-2016, 12:15 PM

Quote:

Originally Posted by Hart_Rod

Well the 68 left for California a week ago. The new owner seems very pleased with the truck,

. Since the truck left, I have been cleaning/rearranging my garage and my shop. I'm also trying to figure out where I left off with the suburban and taking inventory of where I'm at. Hopefully I'll get a plan in place and get this build back on track.

You said you had a plan already. lol.

Did you get a good price on your 68?

**Hart_Rod** · 04-06-2016, 12:26 PM

Quote:

Originally Posted by lyrikz

You said you had a plan already. lol.

I did. The plan was to eliminate other distractions. DONE! Now I need a plan to get the suburban finished. IN PROCESS!

Quote:

Originally Posted by lyrikz

Did you get a good price on your 68?

I thought I did pretty good on it...

. Here's pictures of it finished.

msgross · 04-06-2016, 09:35 PM

sweet...

**Dieselwrencher** · 04-06-2016, 10:53 PM

Very nice. Congrats on eliminating one. It will be sweet to see the burb progressing too.

**LockDoc** · 04-07-2016, 01:14 AM

-
Well Rob, it looks like all of the Burb delay excuses are gone now. Time to man up!....

Glad you made out OK on the truck. I don't know who wouldn't be proud to drive that. Too cool!

LockDoc

kikkegek · 04-07-2016, 02:53 AM

damn that is one sexy ass truck...love the wheels, hood and engine

**Hart_Rod** · 04-11-2016, 11:44 AM

Quote:

Originally Posted by msgross

sweet...

Thanks Mike!

Quote:

Originally Posted by Dieselwrencher

Very nice. Congrats on eliminating one. It will be sweet to see the burb progressing too.

Thanks, working on it....

Quote:

Originally Posted by LockDoc

-
Well Rob, it looks like all of the Burb delay excuses are gone now. Time to man up!....

Glad you made out OK on the truck. I don't know who wouldn't be proud to drive that. Too cool!

LockDoc

Thanks Doc! Everything worked out in the end. I've got the burb's "home" cleaned and have updated my notes on where I'm currently at. Progress is being made,

Quote:

Originally Posted by kikkegek

damn that is one sexy ass truck...love the wheels, hood and engine

Thanks!

Got the shop cleaned and making some progress. I cleaned the burb a little and got it up on blocks. I'm still trying to sort out my a/c lines. This was one of the things that caused me to turn the lights off and lock the doors on this project. I think I have it figured out but I need to find a tool or somebody that has the tool to reflare the ends of the a/c lines coming off of the evaporator. Here's a picture of the flare I need to be able to make. Any suggestions would be awesome.

67ChevyRedneck · 04-11-2016, 12:02 PM

greg65 · 04-11-2016, 02:06 PM

I work with a guy that has a small hot rod shop on the side that is a dealer for Vintage Air. He said Vintage Air sell the tubing in different lengths with either male or female ends. They told him to bend the tubing how he wants it, send it to them and they would flare it. He did tell me it he ever found the machine to do it he would have one. If you have any question give him a call on the cell number.

03-14-2016, 04:07 PM	#1376
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: 1969 SuperBurb build-up (Bagged and Blown!) Let me pull up a chair and wait for the show to start.... __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

03-14-2016, 06:27 PM	#1377
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,228	Re: 1969 SuperBurb build-up (Bagged and Blown!) __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

03-14-2016, 11:35 PM	#1378
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: 1969 SuperBurb build-up (Bagged and Blown!) Hope y'all have picture in picture on your screens so you'll have something to watch in the meantime. __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

03-19-2016, 08:54 PM	#1381
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 1969 SuperBurb build-up (Bagged and Blown!) Ok, so I went out to work on the burb today. I hooked the battery up, my Viar air compressor kicked on and ran for about 3 minutes and shut off. Tried to air the rear bags up and nothing. Check the air tank and it was empty. Disconnected and reconnected the battery and once again, compressor runs but does not put any air in the tank. The compressor is brand new (5 years ago, ) and only has about 1 hr of run time. Really baffling that its running and not pumping any air at all. Any suggestions? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-19-2016, 09:22 PM	#1382
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: 1969 SuperBurb build-up (Bagged and Blown!) I don't know how it is around your area, but over here if you let something sit too long you will have dirt dauber nests clogging up everything. Make sure nothing is plugging up the intake of the compressor(s). Also, I would check any one-way check valves for stuck components. Dry rings on the piston of the compressor??? Just a few ideas... __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

03-20-2016, 12:56 AM	#1383
BaggedBurban Registered User Join Date: Mar 2016 Location: Portland,OR Posts: 164	Re: 1969 SuperBurb build-up (Bagged and Blown!) As stated above I would look at the one way check valve.

03-20-2016, 12:17 PM	#1385
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Re: 1969 SuperBurb build-up (Bagged and Blown!) If you are using a Viair supplied leader hose off of the compressor, it will be on the end of the hose. Use the foreground of the pic as reference. Attached Images __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

03-21-2016, 10:37 PM	#1387
BaggedBurban Registered User Join Date: Mar 2016 Location: Portland,OR Posts: 164	Re: 1969 SuperBurb build-up (Bagged and Blown!) Went through this last weekend, check valve was cracked. Bought a new one and fixed the air leak I have. Now the passenger front is leaking, got to locate this leak too. Fun never ends...

03-28-2016, 08:07 PM	#1389
fishnixon Registered User Join Date: Sep 2006 Location: Ely, Minnesota Posts: 543	Re: 1969 SuperBurb build-up (Bagged and Blown!) I like the short box build. Nice detail and great craftsmanship. Keep up the good work. I think I have the perfect transport for it. Rob Attached Images

04-06-2016, 12:04 PM	#1391
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 1969 SuperBurb build-up (Bagged and Blown!) Well the 68 left for California a week ago. The new owner seems very pleased with the truck, . Since the truck left, I have been cleaning/rearranging my garage and my shop. I'm also trying to figure out where I left off with the suburban and taking inventory of where I'm at. Hopefully I'll get a plan in place and get this build back on track. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

04-06-2016, 09:35 PM	#1394
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 1969 SuperBurb build-up (Bagged and Blown!) sweet... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

04-06-2016, 10:53 PM	#1395
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 1969 SuperBurb build-up (Bagged and Blown!) Very nice. Congrats on eliminating one. It will be sweet to see the burb progressing too. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-07-2016, 01:14 AM	#1396
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,799	Re: 1969 SuperBurb build-up (Bagged and Blown!) - Well Rob, it looks like all of the Burb delay excuses are gone now. Time to man up!.... Glad you made out OK on the truck. I don't know who wouldn't be proud to drive that. Too cool! LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

04-07-2016, 02:53 AM	#1397
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: 1969 SuperBurb build-up (Bagged and Blown!) damn that is one sexy ass truck...love the wheels, hood and engine __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

04-11-2016, 12:02 PM	#1399
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 1969 SuperBurb build-up (Bagged and Blown!) __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!



Register or Log In To remove these advertisements.

04-11-2016, 02:06 PM	#1400
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: 1969 SuperBurb build-up (Bagged and Blown!) I work with a guy that has a small hot rod shop on the side that is a dealer for Vintage Air. He said Vintage Air sell the tubing in different lengths with either male or female ends. They told him to bend the tubing how he wants it, send it to them and they would flare it. He did tell me it he ever found the machine to do it he would have one. If you have any question give him a call on the cell number. Attached Images __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

Register or Log In To remove these advertisements.