1969 Short Wide - Page 57 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcbassin · 12-01-2013, 12:12 PM

Quote:

Originally Posted by screaminchevypickup

Great work mike!

Thanks Kyle.

Quote:

Originally Posted by Zoomin

Lots of little things add up to a lot. Love seeing it come together.

Thanks Steve. It's good to put things together instead taking them apart.

Quote:

Originally Posted by Jahloha

I am loving that bed!!!

Thanks.

Quote:

Originally Posted by swamp rat

I guess a lot of these paints can be sprayed right over the clear and then be re cleared again, so i hear anyway.. Your doing great work!

Thanks. Keep in mind I'm only touching up the sand through area with base coat and then spraying the whole area with clear. I stopped at the edge on this panel but normally you re-clear the whole panel. I didn't because it's the inside of the bed and didn't want to re do the whole thing.

Quote:

Originally Posted by Bennett68C10

Looks awesome Mike

Thanks Keith.

Quote:

Originally Posted by Crash_OK

Dang... Looking really good Mike.. If you are working this week on it I will come out and help you/hang out...

I should be working out there all week.

jlsanborn · 12-01-2013, 01:58 PM

Soo nice! The tinted liner is killer! Great job!

nasqar · 12-01-2013, 07:14 PM

Nice paint bro! The reflection on the inside of the bed is awesome....

**68 Four on the Floor** · 12-01-2013, 07:31 PM

Lookin good Mike

JD'S 69 · 12-01-2013, 08:22 PM

Looks good, I'm going to use that raptor coating too.

mcbassin · 12-02-2013, 09:09 AM

Quote:

Originally Posted by jlsanborn

Soo nice! The tinted liner is killer! Great job!

Thanks.

Quote:

Originally Posted by nasqar

Nice paint bro! The reflection on the inside of the bed is awesome....

Thanks Eddie.

Quote:

Originally Posted by 68 Four on the Floor

Lookin good Mike

Thanks, how you coming on your project? You make a build thread yet?

Quote:

Originally Posted by JD'S 69

Looks good, I'm going to use that raptor coating too.

Thanks, the Raptor is really easy to use. Two warnings though, welding spatter makes ugly black marks and you don't want to use paint reducer to remove the black marks. Ask me how I know......
Notice the factory style welds in the corners. I have to go back paint and touch up the Raptor now.
It's definitely better to assemble the bed before paint if possible. I wanted to color sand and buff my panels
which is much easier with it all apart.

**Hart_Rod** · 12-02-2013, 10:58 AM

Love the color!!!

Low Elco · 12-02-2013, 11:13 AM

Awwwwww, Duuuuude... I hate tearing into done stuff! Can you blend Raptor? I wound up doing Al's in 3 rounds, but it blends well.

mcbassin · 12-02-2013, 12:14 PM

Quote:

Originally Posted by Hart_Rod

Love the color!!!

Thanks Rob, I figured you would like it.

Quote:

Originally Posted by Low Elco

Awwwwww, Duuuuude... I hate tearing into done stuff! Can you blend Raptor? I wound up doing Al's in 3 rounds, but it blends well.

I'm not sure about blending the raptor. It is a urethane product so it should be fine. I'm not too worried about it, the damage is done, I expect to screw up some part of everything I do on this truck. Par for the course. Maybe my next one will go smoother.

sduckworth13 · 12-06-2013, 01:49 PM

Mike, I agree with everyone else on the bed. You did a great job taking your time to line below the bed floor with the Raptor. The bed looks outstanding.

mcbassin · 12-06-2013, 02:28 PM

Quote:

Originally Posted by sduckworth13

Mike, I agree with everyone else on the bed. You did a great job taking your time to line below the bed floor with the Raptor. The bed looks outstanding.

Thanks Scott for checking out my humble build.
Honestly I have way too much time tied up in this old pile of bolts. (notice I didn't say rusty pile of bolts). I'm so glad to be past all the rust repair

But, I think in the end it will be worth all my effort

mcbassin · 12-06-2013, 02:49 PM

Did a little work the other night, mounted my cab and started trying to figure out the rat's nest of wiring

It needs a bunch of help.
I did manage to hook a battery up to the engine and it started right up

Love those Magnaflows...

Hope we can get a break in the weather soon so I can get back on it.

**scotts62** · 12-06-2013, 06:16 PM

Awesome dude! Yeah i hear ya on weather lightening up... 15hr day today because of the stuff, needs to clear up so i can come out and check out the truck.

**68 Four on the Floor** · 12-06-2013, 06:44 PM

Quote:

Originally Posted by mcbassin

Thanks, how you coming on your project? You make a build thread yet?

Cab is on the frame for mockup with the 5.3 and set door gaps. No build thread yet no one wants to see my pile lol

Zoomin · 12-06-2013, 07:33 PM

Congrats on the fire up!!! That's a big milestone, right there.

Low Elco · 12-07-2013, 08:18 AM

Cab mounted, Fired up... Shoot, you prit near done! Congrats on the big step.

Crash_OK · 12-07-2013, 10:24 AM

Looks great Mike.. Are you working on it any this weekend or is it too cold in your shop?

nasqar · 12-07-2013, 12:31 PM

Quote:

Originally Posted by 68 Four on the Floor

Cab is on the frame for mockup with the 5.3 and set door gaps. No build thread yet no one wants to see my pile lol

Talking about a pile? Look at my thread....man this thing is about camaraderie and having fun...my truck isnt close to being top notch, but it is fun to share things and get input from others. Make a thread and let us see what your doing...maybe we can learn from it.

nasqar · 12-07-2013, 12:32 PM

Congrats on the firing brother!!!!!!!!! woo hoooo....did the family come running out and wonder what that racket was? lol....

mcbassin · 12-07-2013, 02:43 PM

Quote:

Originally Posted by scotts62

Awesome dude! Yeah i hear ya on weather lightening up... 15hr day today because of the stuff, needs to clear up so i can come out and check out the truck.

Thanks Scott. This arctic weather sucks!

Quote:

Originally Posted by 68 Four on the Floor

Cab is on the frame for mockup with the 5.3 and set door gaps. No build thread yet no one wants to see my pile lol

We all want you to share you build. Come on...

Quote:

Originally Posted by Zoomin

Congrats on the fire up!!! That's a big milestone, right there.

Thanks Steve, not as dramatic as the first time but good to know it fires right up after sitting all that time.

Quote:

Originally Posted by Low Elco

Cab mounted, Fired up... Shoot, you prit near done! Congrats on the big step.

Thanks another step in the right direction.

Quote:

Originally Posted by Crash_OK

Looks great Mike.. Are you working on it any this weekend or is it too cold in your shop?

Thanks Mark. No heat out there so I'm stuck inside. Well watching the game now.

Quote:

Originally Posted by nasqar

Congrats on the firing brother!!!!!!!!! woo hoooo....did the family come running out and wonder what that racket was? lol....

Thanks Eddie it was good to hear it.

Crash_OK · 12-18-2013, 11:56 AM

It warmed up.. where are the updates?

mcbassin · 12-18-2013, 12:16 PM

Quote:

Originally Posted by Crash_OK

It warmed up.. where are the updates?

No update, did a little work on it. Not enough to even justify pictures. I did start mounting panels last night, fighting with the gaps. Major pain in back side.

Got another iron in the fire right now too.

Crash_OK · 12-18-2013, 12:18 PM

Quote:

Originally Posted by mcbassin

No update, did a little work on it. Not enough to even justify pictures. I did start mounting panels last night, fighting with the gaps. Major pain in back side.

Got another iron in the fire right now too.

The 86?

**Dieselwrencher** · 12-18-2013, 03:51 PM

Congrats on firing it up!!! That has to make you feel warm and fuzzy for at least a little bit.

mcbassin · 12-18-2013, 05:04 PM

Quote:

Originally Posted by Crash_OK

The 86?

Yep, I have been helping a little on it. He was tidying up the wiring last night. Still have to prep the engine bay and get the fuel system lined out.

Quote:

Originally Posted by Dieselwrencher

Congrats on firing it up!!! That has to make you feel warm and fuzzy for at least a little bit.

Yeah, it's always good to hear the heartbeat of the project.

12-01-2013, 01:58 PM	#1402
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: 1969 Short Wide Soo nice! The tinted liner is killer! Great job! __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

12-01-2013, 07:14 PM	#1403
nasqar Here kitty kitty kitty Join Date: Aug 2010 Location: Perrysville, IN Posts: 548	Re: 1969 Short Wide Nice paint bro! The reflection on the inside of the bed is awesome....

12-01-2013, 07:31 PM	#1404
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: 1969 Short Wide Lookin good Mike

12-01-2013, 08:22 PM	#1405
JD'S 69 Registered User Join Date: Mar 2012 Location: Baker city Oregon Posts: 268	Re: 1969 Short Wide Looks good, I'm going to use that raptor coating too. __________________ When I stand before god at the at the end of my life, I would hope that I would not have a single bit of talent left, and I could say," I used everything you gave me" My 69 stepper http://67-72chevytrucks.com/vboard/s...d.php?t=601095

12-02-2013, 10:58 AM	#1407
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 1969 Short Wide Love the color!!! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

12-02-2013, 11:13 AM	#1408
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: 1969 Short Wide Awwwwww, Duuuuude... I hate tearing into done stuff! Can you blend Raptor? I wound up doing Al's in 3 rounds, but it blends well. __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

12-06-2013, 01:49 PM	#1410
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: 1969 Short Wide Mike, I agree with everyone else on the bed. You did a great job taking your time to line below the bed floor with the Raptor. The bed looks outstanding. __________________ Scott

12-06-2013, 02:49 PM	#1412
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 Short Wide Did a little work the other night, mounted my cab and started trying to figure out the rat's nest of wiring It needs a bunch of help. I did manage to hook a battery up to the engine and it started right up Love those Magnaflows... Hope we can get a break in the weather soon so I can get back on it. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

12-06-2013, 06:16 PM	#1413
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: 1969 Short Wide Awesome dude! Yeah i hear ya on weather lightening up... 15hr day today because of the stuff, needs to clear up so i can come out and check out the truck. __________________ Scott 93 crew cab build Project 62

12-06-2013, 07:33 PM	#1415
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 1969 Short Wide Congrats on the fire up!!! That's a big milestone, right there. __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

12-07-2013, 08:18 AM	#1416
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: 1969 Short Wide Cab mounted, Fired up... Shoot, you prit near done! Congrats on the big step. __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

12-07-2013, 10:24 AM	#1417
Crash_OK Registered User Join Date: Nov 2011 Location: Edmond, OK. Posts: 1,362	Re: 1969 Short Wide Looks great Mike.. Are you working on it any this weekend or is it too cold in your shop? __________________ Mark ----------------------- Crash's 69 4x4 SWB Crash's Roof over Lake Home Crash's 1988 Land Cruiser Build

12-07-2013, 12:32 PM	#1419
nasqar Here kitty kitty kitty Join Date: Aug 2010 Location: Perrysville, IN Posts: 548	Re: 1969 Short Wide Congrats on the firing brother!!!!!!!!! woo hoooo....did the family come running out and wonder what that racket was? lol....

12-18-2013, 11:56 AM	#1421
Crash_OK Registered User Join Date: Nov 2011 Location: Edmond, OK. Posts: 1,362	Re: 1969 Short Wide It warmed up.. where are the updates? __________________ Mark ----------------------- Crash's 69 4x4 SWB Crash's Roof over Lake Home Crash's 1988 Land Cruiser Build

12-18-2013, 03:51 PM	#1424
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 1969 Short Wide Congrats on firing it up!!! That has to make you feel warm and fuzzy for at least a little bit. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.