What did you do to your truck today part III - Page 59 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jbgroby · 12-20-2015, 12:05 PM

Got the horn button installed, do not quite yet if it will work, but there is always the 'fingwr'.

**chevy2tom** · 12-20-2015, 12:51 PM

Nice gauge set up

jbgroby · 12-20-2015, 02:16 PM

Thanks, I followed the OEM light setup and added the OEM click and tack

oldies1938 · 12-20-2015, 05:46 PM

I put glove box lock and under dash ashtray knob and snuffer on

**PORKY** · 12-20-2015, 11:26 PM

We got the firewall painted today.

jturner18 · 12-21-2015, 07:44 PM

Well...I was just going to start with the headlight rebuild and ended up here. Guess I'll do a frame off now. Ha!

Grizz1963 · 12-22-2015, 07:29 AM

Quote:

Originally Posted by jturner18

Well...I was just going to start with the headlight rebuild and ended up here. Guess I'll do a frame off now. Ha!

I feel your pain.

**PORKY** · 12-22-2015, 07:42 PM

Quote:

Originally Posted by jturner18

Well...I was just going to start with the headlight rebuild and ended up here. Guess I'll do a frame off now. Ha!

Was there 4+ years ago, still there. I've just recently started back at it. We were just going to replace rocker panels and got into a full frame off.
But we are gaining. Stay with it, a little each day and soon it'll be done.
Best of luck!

mehoff400 · 12-22-2015, 11:18 PM

getting ready to pull the engine. think all is left is unbolt motor mounts and remove driveline.

racecougar · 12-23-2015, 12:01 AM

Took 7" out of the original '65 12-bolt and installed a pair of Moser 7950 housing ends. These ends retain the stock brake mounting pattern while converting to the big Ford 3.15" axle bearings and retainer plates, thereby eliminating the need for C-clips.

The housing is now 50" end to end. It was 57" originally; already 1-1/2" narrower than the later truck 12-bolts.

vince1 · 12-24-2015, 02:14 PM

-15C (5F) so I just plugged it in and came in for a coffee. Today it gets to drop a stove off at the recyclers. It will be interesting to learn how she handles the fresh snow without the aid of positrac.

FF SIX ONE · 12-24-2015, 06:21 PM

That looks solid doobiebro, can't wait till you get it back on the road.

**Backpayne** · 12-24-2015, 08:49 PM

I have the front on jack stands with the drum brakes torn apart. Wheel cylinder on front right was leaking. Both drums on front were originals and time for new drums and internals.

I just bought the 64 c10 on Tuesday.

60chevyjim · 12-25-2015, 05:07 AM

I detailed the 6cyl & 3spd that I took out of the 65 truck im building for my friend James and I put it in my 65 truck .
his truck gets the 350 & th350 that was in my truck.
my truck was his parts truck , so I get all the leftover scrap parts to build mine with .
I spray canned the fender the same red that I did the engine with to see how the truck would look red.

backpayne your truck looks great , I like the paint ..

**TJ's Chevy** · 12-25-2015, 12:19 PM

Quote:

Originally Posted by 60chevyjim

I detailed the 6cyl & 3spd that I took out of the 65 truck im building for my friend James and I put it in my 65 truck .
his truck gets the 350 & th350 that was in my truck.
my truck was his parts truck , so I get all the leftover scrap parts to build mine with .
I spray canned the fender the same red that I did the engine with to see how the truck would look red.

backpayne your truck looks great , I like the paint ..

Nice looking six banger!

**Backpayne** · 12-25-2015, 06:28 PM

Quote:

Originally Posted by TJ's Chevy

Nice looking six banger!

Hey, just noticed your youtube ID. I've watched several of your videos on youtube to get an idea of which direction I want to go for exhaust. Thanks for posting them!

**TJ's Chevy** · 12-25-2015, 06:31 PM

Quote:

Originally Posted by Backpayne

Hey, just noticed your youtube ID. I've watched several of your videos on youtube to get an idea of which direction I want to go for exhaust. Thanks for posting them!

Thanks! Yeah, those flowmasters sound good imop. Hope the videos help ya!

**Backpayne** · 12-25-2015, 06:35 PM

Quote:

Originally Posted by TJ's Chevy

Thanks! Yeah, those flowmasters sound good imop. Hope the videos help ya!

They sound great! Loud in the cab?

mjh1965 · 12-26-2015, 01:43 PM

Well I said I wanted it rolling by Christmas and well it's rolling . I still need to fit the rear shoes and rear wheel cylinders , but I have spoken to Don and he is getting me the rear Spring kit .

Well after I pushed it outside , i decided to get the engine in place

The next job is to fabricate a mount for the TH350 auto box so the engine is in and the box will have to follow . I have already got the later 66 park brake cables so I can do away with the canter leaver system on the 65 .

Lugnutz65 · 12-26-2015, 11:08 PM

Quote:

Originally Posted by mjh1965

Well I said I wanted it rolling by Christmas and well it's rolling . I still need to fit the rear shoes and rear wheel cylinders , but I have spoken to Don and he is getting me the rear Spring kit .

Now I see you must be my long lost brother in England. We both have a 1965 and I see you have the EXACT same wheels. I know those beautiful slots are from a 1970's Jeep Wagoneer (just like mine) and have the 3 small holes where the center cap screws onto the wheel. Very nice indeed!

**AngryPirate** · 12-27-2015, 12:57 PM

Quote:

Originally Posted by mjh1965

Well I said I wanted it rolling by Christmas and well it's rolling . I still need to fit the rear shoes and rear wheel cylinders , but I have spoken to Don and he is getting me the rear Spring kit .

The next job is to fabricate a mount for the TH350 auto box so the engine is in and the box will have to follow . I have already got the later 66 park brake cables so I can do away with the canter leaver system on the 65 .

I love the grey frame paint. Also, wow, impressive amount of pulleys in that front view

**AngryPirate** · 12-27-2015, 01:06 PM

Popped out the windshield and back glass. Question, is there any way to fix some 'foggy' sections in the glass? The spots are mostly near the edges and it seems like there might be coating that has leaked.

After that, I blasted and epoxy primered the cowls, front intake vent area and some patch panels for the front fenders. I mostly just did the patch panels to test some factory paint colours.

Also, I found some rust hidden under the rain gutters seam sealer on my replacement cab. i guess I'm learning how to do lead body filling now. <womp womp>

**Palf70Step** · 12-27-2015, 02:00 PM

Quote:

Originally Posted by AngryPirate

Popped out the windshield and back glass. Question, is there any way to fix some 'foggy' sections in the glass? The spots are mostly near the edges and it seems like there might be coating that has leaked.

Unfortunately, that is in the layers of the glass and the only way I know of is to replace the glass.

schpeen · 12-27-2015, 05:42 PM

mounted my new tool box to the bed and added some magnets to keep the lid closed.

**Palf70Step** · 12-26-2015, 02:17 PM

Very Nice!!

12-20-2015, 12:05 PM	#1
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,770	Re: What did you do to your truck today part III Got the horn button installed, do not quite yet if it will work, but there is always the 'fingwr'. Attached Images __________________ http://s1299.photobucket.com/user/jb...23904108567829

12-20-2015, 12:51 PM	#2
chevy2tom Senior Member Join Date: Aug 2009 Location: Wheeling, Illinois Posts: 703	Re: What did you do to your truck today part III Nice gauge set up

12-20-2015, 02:16 PM	#3
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,770	Re: What did you do to your truck today part III Thanks, I followed the OEM light setup and added the OEM click and tack __________________ http://s1299.photobucket.com/user/jb...23904108567829

12-20-2015, 05:46 PM	#4
oldies1938 Registered User Join Date: May 2013 Location: chino hills ca Posts: 91	Re: What did you do to your truck today part III I put glove box lock and under dash ashtray knob and snuffer on Attached Images __________________ MY 66 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=667780

12-20-2015, 11:26 PM	#5
PORKY Registered User Join Date: Nov 2010 Location: LITTLETON NH Posts: 106	Re: What did you do to your truck today part III We got the firewall painted today. Attached Images

12-21-2015, 07:44 PM	#6
jturner18 Registered User Join Date: Nov 2015 Location: Trenton Ky Posts: 93	Re: What did you do to your truck today part III Well...I was just going to start with the headlight rebuild and ended up here. Guess I'll do a frame off now. Ha! Attached Images

12-22-2015, 11:18 PM	#9
mehoff400 Registered User Join Date: Apr 2015 Location: Puyallup WA Posts: 365	Re: What did you do to your truck today part III getting ready to pull the engine. think all is left is unbolt motor mounts and remove driveline.

12-23-2015, 12:01 AM	#10
racecougar Registered User Join Date: Jan 2013 Location: Imperial, MO Posts: 999	Re: What did you do to your truck today part III Took 7" out of the original '65 12-bolt and installed a pair of Moser 7950 housing ends. These ends retain the stock brake mounting pattern while converting to the big Ford 3.15" axle bearings and retainer plates, thereby eliminating the need for C-clips. The housing is now 50" end to end. It was 57" originally; already 1-1/2" narrower than the later truck 12-bolts. __________________ Rod @ AzzKicker Cars 1965 C10 SWB - Build Thread

12-24-2015, 02:14 PM	#11
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,166	Re: What did you do to your truck today part III -15C (5F) so I just plugged it in and came in for a coffee. Today it gets to drop a stove off at the recyclers. It will be interesting to learn how she handles the fresh snow without the aid of positrac.

12-24-2015, 06:21 PM	#12
FF SIX ONE Registered User Join Date: Jan 2012 Location: EL PASO TX. Posts: 51	Re: What did you do to your truck today part III That looks solid doobiebro, can't wait till you get it back on the road.

12-24-2015, 08:49 PM	#13
Backpayne Senior Member Join Date: Nov 2015 Location: Seligman, MO Posts: 621	Re: What did you do to your truck today part III I have the front on jack stands with the drum brakes torn apart. Wheel cylinder on front right was leaking. Both drums on front were originals and time for new drums and internals. I just bought the 64 c10 on Tuesday. Last edited by Backpayne; 12-24-2015 at 08:55 PM.

12-25-2015, 05:07 AM	#14
60chevyjim Registered User Join Date: Dec 2015 Location: tarboro nc. Posts: 400	Re: What did you do to your truck today part III I detailed the 6cyl & 3spd that I took out of the 65 truck im building for my friend James and I put it in my 65 truck . his truck gets the 350 & th350 that was in my truck. my truck was his parts truck , so I get all the leftover scrap parts to build mine with . I spray canned the fender the same red that I did the engine with to see how the truck would look red. backpayne your truck looks great , I like the paint .. Attached Images

12-26-2015, 01:43 PM	#19
mjh1965 Registered User Join Date: Sep 2013 Location: Kent England Posts: 1,025	Re: What did you do to your truck today part III Well I said I wanted it rolling by Christmas and well it's rolling . I still need to fit the rear shoes and rear wheel cylinders , but I have spoken to Don and he is getting me the rear Spring kit . Well after I pushed it outside , i decided to get the engine in place The next job is to fabricate a mount for the TH350 auto box so the engine is in and the box will have to follow . I have already got the later 66 park brake cables so I can do away with the canter leaver system on the 65 . __________________ FINALLY PUTTING IT BACK TOGETHER AT LONG LAST MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=611614

12-27-2015, 01:06 PM	#22
AngryPirate Senior Member Join Date: Jan 2012 Location: Austin, TX Posts: 547	Re: What did you do to your truck today part III Popped out the windshield and back glass. Question, is there any way to fix some 'foggy' sections in the glass? The spots are mostly near the edges and it seems like there might be coating that has leaked. After that, I blasted and epoxy primered the cowls, front intake vent area and some patch panels for the front fenders. I mostly just did the patch panels to test some factory paint colours. Also, I found some rust hidden under the rain gutters seam sealer on my replacement cab. i guess I'm learning how to do lead body filling now. <womp womp> Attached Images

12-27-2015, 05:42 PM	#24
schpeen Registered User Join Date: Jun 2014 Location: fort lauderdale, florida Posts: 511	Re: What did you do to your truck today part III mounted my new tool box to the bed and added some magnets to keep the lid closed. Attached Images



Register or Log In To remove these advertisements.

12-26-2015, 02:17 PM	#25
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,759	Re: What did you do to your truck today part III Very Nice!! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

Register or Log In To remove these advertisements.