![]() |
|
![]() |
#1 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Mud time, my favorite part of the restoration process!!
![]() Skimmed across the seam to get both side dead even. ![]() ![]() Then skimmed and blocked the whole side. ![]() ![]() Started blocking the left side. ![]() Rodney started working the inside of the bed. ![]() ![]() ![]() ![]() ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#3 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
If I ever win the lottery, I'm sending you every car I own.
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
#4 | |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Quote:
![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Some details of sanding the primer. I sand the flat areas first, then hit the edges with guidecoat so I can see how much primer I'm taking off the edge, and also how evenly I'm blocking the edge. This keeps the diameter and shape of the edge even front to back.
![]() Roll above the edge and the flat area below sanded first. ![]() Shot with guide coat. ![]() Edge blocked. You can see how far the new edge shape comes over into the upper roll and lower flat panel. ![]() Sanding/shaping the bed side seam using a 1/8" welding rod wrapped in sandpaper. ![]() ![]() Ready to shape the lower edge of the upper bed panel. ![]() After sanding. ![]() Left side blocked, a couple spots touched up, seams/edges detail sanded. Ready for blocking with 180 and shot with more Slick Sand. ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Apr 2012
Location: Beaver, Pa.
Posts: 197
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Still checking in and following along, very nice work as always.
|
![]() |
![]() |
![]() |
#8 | |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Quote:
![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Sprayed inside the bed, the header panel, and the left bedside sprayed with Slick Sand today.
Shaped a piece of foam to fit the bed floor ridges and glued it to a jitterbug sander to prep the bed floor before primer. ![]() Some shots of the primer. This part of the resto gets kinda repetitive... ![]() ![]() ![]() ![]() ![]() ![]() ![]() Some shots while it was still wet. ![]() ![]() ![]() ![]() ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#10 |
Registered User
![]() Join Date: May 2007
Location: Deale Md
Posts: 4,663
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
spray sand spray sand spray sand are we there yet I gotta go
![]()
__________________
James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change! |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
That's about it, bathroom breaks and a stop now and then to stretch your legs. The bed floor was a back and knee killer, even with the rotisserie. Anyone got any low mileage arms and fingers I can borrow?
![]() Posted via Mobile Device
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
More block sanding... Seems like this part never ends! We did this Tuesday and Wednesday, Rodney took the day off and I cleaned up and extra stall we weren't using. My arms needed a rest from blocking for two days straight.
![]() I cut down and reshaped a Durablock to fit the bed floor grooves. ![]() Then glued it to an inline sander. This saved a ton of time! I usually hate these things for any other kind of sanding but it worked well for this. ![]() After blocking the top and bottom grooves, the edges needed sanding. Bottom masked off to keep the block from cutting stray grooves into the primer. ![]() ![]() After sanding. ![]() Fixing the high/low spots with a skim of filler. ![]() Blocking the driver side... again. ![]() Using PVC to shape the concave area. ![]() Checking the reflection after blocking with 80 grit by wiping wax and grease remover over the surface. You can see how well the reflection carries over from the bed side to the bed corner. ![]() The spot that was cut out and welded back in didn't need any filler, any distortion blocked out with just high build. ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#13 |
Registered User
![]() Join Date: May 2007
Location: Deale Md
Posts: 4,663
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
That's a lot of work on the inside of the bed hope it doesn't get used as a truck when your done.
__________________
James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change! |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Well, the inside of the bed is all been blocked out, and any high/low spots touched up. Just shot three coats of PPG K36 so we can wetsand and paint it. The outside of the bed bed is in Slick Sand, ready for what should be the last round of blocking.
![]() ![]() ![]() ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Inside of cab corner coated with chassis saver and welded on. I left the bottom edge uneven to match the factory sloppiness.
![]() ![]() Right door gaps mostly finished. Need to go across the bottom still, and can't do the front edge until the front clip is on. ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Had to make the cowl drains since they aren't reproduced. Started with a paper template, the wrinkles show what areas need to be shrunk.
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Prepped the passenger side with Chassis Saver. Have to get the kick panel in before I can finish the drain for this side. ![]() Fitted and tacked the driver side floor in place. ![]() Then fully welded. ![]() ![]() Kick panel tacked in place. ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Haven't posted lately so here's the updates. We're finished with metalwork on the cab and doors and have them in epoxy.
Passenger floor fitted and welded in. ![]() We drilled a couple 1/8" holes in each end of the hinges while the doors were bolted up and aligned. Next time we install the doors we can use 1/8" welding rods to easily align the holes, and the doors will be 95% adjusted on the first try. ![]() The windshield and back glass pinchwelds were extremely rough and wavy. ![]() ![]() After straightening and smoothing. The glass will be easier to install and the rubber will lay down evenly across the pinchweld. ![]() ![]() Door skins were seam sealed from the inside out, and the drains were reopened with a dremel after the sealer dried. ![]() Doors prepped for epoxy using PPG DX579 and DX520. ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
We mounted the cab on a rotisserie so we could grind the welds on the bottom side.
![]() After smoothing the welds. ![]() Shot with PPG DPLF epoxy. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Won't take much bodywork to make the floor pan grafts disappear. ![]() Doors shot with epoxy. ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
We bodyworked the doors, firewall, and kick panels and got them shot with PPG K36 high build. Also seam sealed the door jambs, inside the cab, the firewall, and the drip rails.
![]() Masked any stamped numbers to preserve the details. ![]() Kick panels primed and seam sealed. ![]() ![]() Seam sealed with Fusor 122 self leveling seam sealer. Flows out almost glass smooth. ![]() ![]() Roof seam. ![]() ![]() Inside of doors didn't need much, only had a few ripples across the bottoms. ![]() Shot with K36. ![]() ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Man, you guys do nice work! Good blocking tips, too. Do you dry block to 320?
__________________
Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low! |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Thanks! We go up to 180 when dry blocking.
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
We blasted the vent frames and shot them with epoxy, then high build.
![]() Door jambs masked, ready to shoot with high build. ![]() ![]() ![]() Sprayed with K36. ![]() Starting to work the pan graft areas underneath. This is where a rotisserie is really handy! ![]() ![]() Roof skimmed and blocked, ready for Slick Sand. ![]() If you've been wondering about how much filler stays on the panel, this is what was blocked off just the center section of the roof, not the sides. This was also with a fan blowing, so this isn't all that was blocked off. Doesn't take much to make a mess of the shop when dry blocking! ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: May 2011
Location: Anderson SC
Posts: 3,885
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
Starting the radio patch panel.
![]() Shaped to fit the contour of the dash. ![]() Cut line scribed. ![]() Fitted and tacked in place. ![]() Fully welded and smoothed. ![]() ![]() Leveled the cab, then leveled the face plate mount to mark the holes that need to be drilled. ![]() Radio mounted. ![]() Made a support brace from 1/8" plate. ![]() Picked up the fenders, hood, splash, and grill panel from the blaster. ![]() This one needs a bit of work! ![]()
__________________
Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc |
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: Jan 2013
Location: Leonardtown, MD
Posts: 1,642
|
Re: 1966 F100 Short/Fleet Full Stock Resto Build Thread
A lot of detail work going on there, looks awesome. Truck will be brand new and ready for another 50 years!
__________________
Robert |
![]() |
![]() |
![]() |
Bookmarks |
|
|