'70 GMC SWB Money Hole - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**nlped** · 05-06-2013, 03:00 PM

Quote:

Originally Posted by shawno72

Glad to help Ed, can't wait to see it in action

Me either!!!

I ordered the rest of the fittings and braided 3/8 line to finalize the fuel lines, oh and a polyurethane trans mount for good measure

**nlped** · 05-06-2013, 10:25 PM

No ETA on the Porterbuilt crossmembers & c-notch

. I need these pieces to finalize my gas tank, fuel lines, brake lines and the wiring. Which all has to trial fitted before taking it all apart for blasting & paint.

On the upside, I have an eta for the PSI engine/trans harness (5/10), the remaining fuel line pieces (5/7), s/s brake lines from inline tube (5/9). Geez I really need my Porterbuilt pieces. Oh please finish my pieces Nate.

Posted via Mobile Device

**nlped** · 05-07-2013, 09:04 PM

Trans mount showed up today... It's in. Rest of my fuel line stuff is here too. I can't mock up the lines or tank though. Have I mentioned that I am really getting to a stuck point without the Porterbuilt stuff. Gotta have the C-notch in place & the crossmembers for gas tank placement.

Posted via Mobile Device

**CC69Rat** · 05-07-2013, 10:06 PM

Ed, brother its like going to a fantastic restaraunt .. if the parking lot is empty on Sat night you can get seated fairly quickly yes but why aren't there any other people there?

If the parking lot is full, 2 hr wait.. chances are the food is the reason for that. People flock to the top notch stuff. What sucks is the wait time.

Hang in there buddy. When you see the notch, I promise its worth the wait. .. my bet is you'll be glad you did.
Posted via Mobile Device

**nlped** · 05-07-2013, 10:17 PM

Thanks Chad. I know you're right, but I still blame you for me buying the Porterbuilt stuff... Or that's what I tell my wife

Posted via Mobile Device

**nlped** · 05-10-2013, 11:57 PM

PSI LSX engine/trans harness & ecu showed up tonight. It looks to be a fantastically built harness and the instructions seem to be very thorough. I wished I was actually close enough to need this harness to be "ridin". I think I'd be rolling in an afternoon.
Posted via Mobile Device

**nlped** · 05-11-2013, 12:14 AM

I'm saving up for a potential deal at Good Guys next weekend in Nashville. Fingers crossed.
Posted via Mobile Device

NewType72 · 05-13-2013, 11:48 AM

Looking forward to potential buy hope you get it brother

Posted via Mobile Device

**CC69Rat** · 05-13-2013, 12:39 PM

Quote:

Originally Posted by nlped

I'm saving up for a potential deal at Good Guys next weekend in Nashville. Fingers crossed.
Posted via Mobile Device

Was it black by chance?

Posted via Mobile Device

Xeen · 05-13-2013, 01:09 PM

You and I are doing almost the exact same things with the vortec swap, I had to design custom adapters for my CPP perches as well because the 3" forward adapters didn't work, CPP needs to stop selling it for our application.
I have the PSI standalone harness also.
It's nice to see someone else doing the swap and documenting their progress in detail.
Subscribed.

**nlped** · 05-14-2013, 04:51 PM

Quote:

Originally Posted by CC69Rat

Was it black by chance?

Posted via Mobile Device

Maybe...

**nlped** · 05-14-2013, 04:52 PM

Quote:

Originally Posted by Xeen

You and I are doing almost the exact same things with the vortec swap, I had to design custom adapters for my CPP perches as well because the 3" forward adapters didn't work, CPP needs to stop selling it for our application.
I have the PSI standalone harness also.
It's nice to see someone else doing the swap and documenting their progress in detail.
Subscribed.

I agree on the CPP pieces...poor design for sure. And it great to hear from someone else going down the same road!

**CC69Rat** · 05-14-2013, 06:19 PM

. You can drive it on the HRPT.. how's that?

Can your wife drive a 3ott? She could drive it home.

You are welcome to check it out.
Posted via Mobile Device

**nlped** · 05-14-2013, 07:34 PM

She sure can! She grew up driving her Grand Daddy's '56 Ford. That's my next project vehicle. She inherited it recently. It's rough as a night in jail, but a very cool body style.

**CC69Rat** · 05-14-2013, 07:36 PM

My next one is a 55 Chevy pickup (after I finish my 68

)
Posted via Mobile Device

truckzilla · 05-15-2013, 10:26 AM

Quote:

Originally Posted by nlped

PSI LSX engine/trans harness & ecu showed up tonight. It looks to be a fantastically built harness and the instructions seem to be very thorough. I wished I was actually close enough to need this harness to be "ridin". I think I'd be rolling in an afternoon.
Posted via Mobile Device

You must have different instructions than what came with mine.

I just PM'd you.

weaintscared · 05-15-2013, 01:18 PM

I've got a money pit too.....

My Build http://67-72chevytrucks.com/vboard/s...d.php?t=468622

**nlped** · 05-15-2013, 05:36 PM

^^^ I read your thread. Love the firewall & the gas door.
Posted via Mobile Device

**nlped** · 05-15-2013, 05:39 PM

Just heard from Nate @ Porterbuilt and parts are STILL 1-2 weeks out!!! These pieces better be absolutely stellar because its already been 7 weeks for a set of c-notches and 4 tubular crossmembers and rear lower shock mount member. It's killing my time line.

Posted via Mobile Device

**nlped** · 05-16-2013, 09:22 PM

Headed to Nashville in the morning for the Good Guys show. Hotel is within walking distance of the show & Coyote Ugly.... Whoop Whoop! Great thing is that the wife is going with, and she wants to dance on the bar

**CC69Rat** · 05-16-2013, 09:26 PM

Dang man.. I wish I could make it.

(Not because of your wife..

) I'd just like to see the show and meet all the board members.

Did you get the upper shock bar too?
Posted via Mobile Device

**nlped** · 05-16-2013, 09:33 PM

Yeah, whatever dude

.

I ordered the upper & lower shock bar, front crossmember, rear most crossmember and the Panhard arm crossmember (spans the frame rails above where the Panhard bar mounts to the driver's side frame rail), and the C--Notch. I gotta have these to fit the gas tank, gas lines, brake lines, etc. Killin' ME!!! I'm not going to make the HRPT with the GMC I'm afraid, so I'll have to do it in the, dare I say it, Mustang :O

**CC69Rat** · 05-16-2013, 09:35 PM

Do you have stock trailing arms or AM/ tube arms?
Posted via Mobile Device

**nlped** · 05-16-2013, 09:40 PM

I have 3 sets of stock trailing arms, but I'm using a set of CPP tubular ones that I scored. Why? Have I screwed something up?

**CC69Rat** · 05-16-2013, 09:44 PM

The lower shock bar and the bottom end of the track bar needs a tab of some sort to bolt up to the a trailing arms. Using stock arms there's a bracket Nate sells to make them work.

Pics in my build.
Posted via Mobile Device

05-06-2013, 10:25 PM	#127
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: '70 GMC SWB Money Hole No ETA on the Porterbuilt crossmembers & c-notch . I need these pieces to finalize my gas tank, fuel lines, brake lines and the wiring. Which all has to trial fitted before taking it all apart for blasting & paint. On the upside, I have an eta for the PSI engine/trans harness (5/10), the remaining fuel line pieces (5/7), s/s brake lines from inline tube (5/9). Geez I really need my Porterbuilt pieces. Oh please finish my pieces Nate. Posted via Mobile Device __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

05-07-2013, 09:04 PM	#128
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: '70 GMC SWB Money Hole Trans mount showed up today... It's in. Rest of my fuel line stuff is here too. I can't mock up the lines or tank though. Have I mentioned that I am really getting to a stuck point without the Porterbuilt stuff. Gotta have the C-notch in place & the crossmembers for gas tank placement. Posted via Mobile Device __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

05-07-2013, 10:06 PM	#129
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,206	Re: '70 GMC SWB Money Hole Ed, brother its like going to a fantastic restaraunt .. if the parking lot is empty on Sat night you can get seated fairly quickly yes but why aren't there any other people there? If the parking lot is full, 2 hr wait.. chances are the food is the reason for that. People flock to the top notch stuff. What sucks is the wait time. Hang in there buddy. When you see the notch, I promise its worth the wait. .. my bet is you'll be glad you did. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

05-07-2013, 10:17 PM	#130
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: '70 GMC SWB Money Hole Thanks Chad. I know you're right, but I still blame you for me buying the Porterbuilt stuff... Or that's what I tell my wife Posted via Mobile Device __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

05-10-2013, 11:57 PM	#131
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: '70 GMC SWB Money Hole PSI LSX engine/trans harness & ecu showed up tonight. It looks to be a fantastically built harness and the instructions seem to be very thorough. I wished I was actually close enough to need this harness to be "ridin". I think I'd be rolling in an afternoon. Posted via Mobile Device __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

05-11-2013, 12:14 AM	#132
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: '70 GMC SWB Money Hole I'm saving up for a potential deal at Good Guys next weekend in Nashville. Fingers crossed. Posted via Mobile Device __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

05-13-2013, 11:48 AM	#133
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: '70 GMC SWB Money Hole Looking forward to potential buy hope you get it brother Posted via Mobile Device __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

05-13-2013, 01:09 PM	#135
Xeen Registered User Join Date: Aug 2012 Location: Topeka Kansas Posts: 2,655	Re: '70 GMC SWB Money Hole You and I are doing almost the exact same things with the vortec swap, I had to design custom adapters for my CPP perches as well because the 3" forward adapters didn't work, CPP needs to stop selling it for our application. I have the PSI standalone harness also. It's nice to see someone else doing the swap and documenting their progress in detail. Subscribed. __________________ Please call me Brian. Check out My 1972 SWB Fleetside 5.3L Vortec Restomod Build

05-14-2013, 06:19 PM	#138
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,206	Re: '70 GMC SWB Money Hole . You can drive it on the HRPT.. how's that? Can your wife drive a 3ott? She could drive it home. You are welcome to check it out. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

05-14-2013, 07:34 PM	#139
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: '70 GMC SWB Money Hole She sure can! She grew up driving her Grand Daddy's '56 Ford. That's my next project vehicle. She inherited it recently. It's rough as a night in jail, but a very cool body style. __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

05-14-2013, 07:36 PM	#140
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,206	Re: '70 GMC SWB Money Hole My next one is a 55 Chevy pickup (after I finish my 68 ) Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

05-15-2013, 01:18 PM	#142
weaintscared Registered User Join Date: Mar 2011 Location: Sumter SC Posts: 439	Re: '70 GMC SWB Money Hole I've got a money pit too..... My Build http://67-72chevytrucks.com/vboard/s...d.php?t=468622

05-15-2013, 05:36 PM	#143
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: '70 GMC SWB Money Hole ^^^ I read your thread. Love the firewall & the gas door. Posted via Mobile Device __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

05-15-2013, 05:39 PM	#144
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: '70 GMC SWB Money Hole Just heard from Nate @ Porterbuilt and parts are STILL 1-2 weeks out!!! These pieces better be absolutely stellar because its already been 7 weeks for a set of c-notches and 4 tubular crossmembers and rear lower shock mount member. It's killing my time line. Posted via Mobile Device __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

05-16-2013, 09:22 PM	#145
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: '70 GMC SWB Money Hole Headed to Nashville in the morning for the Good Guys show. Hotel is within walking distance of the show & Coyote Ugly.... Whoop Whoop! Great thing is that the wife is going with, and she wants to dance on the bar __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha



Register or Log In To remove these advertisements.

05-16-2013, 09:26 PM	#146
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,206	Re: '70 GMC SWB Money Hole Dang man.. I wish I could make it. (Not because of your wife.. ) I'd just like to see the show and meet all the board members. Did you get the upper shock bar too? Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

05-16-2013, 09:33 PM	#147
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: '70 GMC SWB Money Hole Yeah, whatever dude . I ordered the upper & lower shock bar, front crossmember, rear most crossmember and the Panhard arm crossmember (spans the frame rails above where the Panhard bar mounts to the driver's side frame rail), and the C--Notch. I gotta have these to fit the gas tank, gas lines, brake lines, etc. Killin' ME!!! I'm not going to make the HRPT with the GMC I'm afraid, so I'll have to do it in the, dare I say it, Mustang :O __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

05-16-2013, 09:35 PM	#148
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,206	Re: '70 GMC SWB Money Hole Do you have stock trailing arms or AM/ tube arms? Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

05-16-2013, 09:40 PM	#149
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,147	Re: '70 GMC SWB Money Hole I have 3 sets of stock trailing arms, but I'm using a set of CPP tubular ones that I scored. Why? Have I screwed something up? __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

05-16-2013, 09:44 PM	#150
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,206	Re: '70 GMC SWB Money Hole The lower shock bar and the bottom end of the track bar needs a tab of some sort to bolt up to the a trailing arms. Using stock arms there's a bracket Nate sells to make them work. Pics in my build. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

Register or Log In To remove these advertisements.