D52 Caliper Rear Disc Brake Brackets

[Juarez823]

Quick update Cap I foundout that CPP does make the e-brake cable converted to work on the eldorado calipers

[Captainfab]

Do they work on the '76-'78 calipers or just on the '79-'85 calipers?

Originally Posted by Juarez823

Quick update Cap I foundout that CPP does make the e-brake cable converted to work on the eldorado calipers

[dmwphoto]

so this works with the original drum axles? (dumb question prolly)

[rob32472]

Originally Posted by dmwphoto

so this works with the original drum axles? (dumb question prolly)

yes

[weircc]

does your kit require removing axles to install??? and is the price the same as front page
and also which wilwood caliber too use i see some different sizes??

[Captainfab]

You don't have to remove the axles to install these brackets, but you will have to, to remove the backing plates. Unless you cut them apart to get them past the axles. It really isn't difficult to remove the axles. When was the last time you changed the rear end oil? If it's been a while, it might be a good idea to pop the rear cover, R&R the axles, re-install the cover with a new gasket, and fill with your choice of gear oil......just sayin

Yes the price is still $232.00 plus $10.00 for shipping. The powder coating is still the same $28.00. You can use any D52 type caliper with this kit. Wilwood makes 2 different sizes of the dual piston D52 calipers. For the rear you will want the ones with the smaller pistons.....1.250" I believe.

Originally Posted by weircc

does your kit require removing axles to install??? and is the price the same as front page
and also which wilwood caliber too use i see some different sizes??

[Sabaka454]

Anyone run this set up with 15" wheels? I am interested in a set

[Captainfab]

Yes, 15" wheels will work with this conversion, as long as they are disc brake compatable wheels.

[Tmwoodall]

Have you considered adding tabs to the mounting plate to allow for the standalone wilwood mechanical parking break calipers? I'd love to run this setup and match my front Wilwoods, but need to be able to pass inspection with an eBrake....

[Captainfab]

Yes I had thought of that some time ago. I just haven't done anything with the idea since it will add some cost to the conversion and I'm not sure if that would put it out of price range for more people.

I'm not saying I'm not going to persue it, it just may take a little time to get it to a final design. I checked with Summit, and these are on back order until the 23rd at the eaeliest.

Originally Posted by Tmwoodall

Have you considered adding tabs to the mounting plate to allow for the standalone wilwood mechanical parking break calipers? I'd love to run this setup and match my front Wilwoods, but need to be able to pass inspection with an eBrake....

[68 TT]

Originally Posted by Captainfab

Yes I had thought of that some time ago. I just haven't done anything with the idea since it will add some cost to the conversion and I'm not sure if that would put it out of price range for more people.

I'm not saying I'm not going to persue it, it just may take a little time to get it to a final design. I checked with Summit, and these are on back order until the 23rd at the eaeliest.

I looked at doing that but the widest rotor the ones I found could use was 0.81" so it didn't work out. Maybe they have another I couldn't locate on their web site. It is possible they could be modified with a machined spacer to make them work with the 1-1/4" thick rotors.

http://www.wilwood.com/Calipers/Cali...me=Mech%20Spot

They do have a hydro-mechanical parking brake caliper now though that can work with a 1" rotor.

http://www.wilwood.com/Calipers/Cali...tion%20P-Brake

[Captainfab]

Yeah, I figured I would have to have some thicker spacers machined to make them work with the 1.250" thick rotors.

Those new Wilwood calipers, have a different type of mounting....they aren't cheap either! I wonder if a guy could add a spacer to those, and use them on the 1.250" rotors? Looks like they are a 2 piece design.....

[Tmwoodall]

Originally Posted by Captainfab

Yeah, I figured I would have to have some thicker spacers machined to make them work with the 1.250" thick rotors.

Those new Wilwood calipers, have a different type of mounting....they aren't cheap either! I wonder if a guy could add a spacer to those, and use them on the 1.250" rotors? Looks like they are a 2 piece design.....

You aren't kidding. Those are pricey. I guess I'll keep thinking. Not sure I want to go without a parking brake (not that I need or use it).

[truck farmer]

hey, captainfab i would like to order some of your D52 disc brake brackets and the brake booster bracket for a 72 chevy pickup. do you have any left?

[Captainfab]

I replied to your PM........

Originally Posted by truck farmer

hey, captainfab i would like to order some of your D52 disc brake brackets and the brake booster bracket for a 72 chevy pickup. do you have any left?

[truck farmer]

do you have an idea when these will ship?

[Captainfab]

Ordinarily your order would have shipped today, but I am currently extremely busy. Your order will ship tomorrow, and you should receive it by Friday.

Originally Posted by truck farmer

do you have an idea when these will ship?

[truck farmer]

thank you very much Captain. i cant wait to get them on my truck.

[truck farmer]

got my brackets a few days ago, they look great. thanks for everything captain. Ill let you know how it goes.

[Mr_Rich]

Are the GM D52 calipers used on the front of the 88-98 trucks?

[Captainfab]

No, those are the D369 calipers. The last year for the D52's on the trucks was '87, or '91 for the V and R series

Originally Posted by Mr_Rich

Are the GM D52 calipers used on the front of the 88-98 trucks?

[Mr_Rich]

Thanks for that information. I'd love to install Wilwood two piston calipers on my truck. I guess that can't happen...

[Captainfab]

If you are talking about the '89 K1500 in your sig, I do have a 6 lug rear disc conversion that uses the D369 calipers.

http://www.67-72chevytrucks.com/vboa...d.php?t=494411

But that does not get you the Wilwood dual piston calipers

Originally Posted by Mr_Rich

Thanks for that information. I'd love to install Wilwood two piston calipers on my truck. I guess that can't happen...

[Captainfab]

Has anyone had an issue with the outside pad rubbing on the hat of the rotor with this conversion?

[chevytruckluver]

I need a set of these
pm sent