The 60-66 "PAYING IT FORWARD" thread! - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**PGSigns** · 09-08-2015, 08:01 PM

I have a 250 6 cylinder engine and 3 speed trans in a 66 I am going to scrap. Engine appears to be in good shape and according to the previous owner ran till he got working on it. Free to anyone who wants to come and get it. Located in south east Virginia.
Jimmy

rudyyloverboiii · 09-11-2015, 12:49 AM

I also have the west coast mirrors That are a little worn down and a manual steering box that might need a new bearing. (Has play)

jwcardy · 09-12-2015, 11:31 PM

Quote:

Originally Posted by rudyyloverboiii

I also have the west coast mirrors That are a little worn down and a manual steering box that might need a new bearing. (Has play)

Pics of the mirrors?

**slepysal** · 09-11-2015, 09:20 PM

the windshield went to Josh jteck10.

jteck10 · 09-16-2015, 06:57 PM

Quote:

Originally Posted by slepysal

the windshield went to Josh jteck10.

thanks again sal! putting it in hopefully this week

**LostMy65** · 09-18-2015, 06:19 PM

Free
- Local - Oregon City
6 - Dually Wheels with nice tires. 8 Lug. 16.5 Dia.

jteck10 · 09-19-2015, 02:00 PM

Quote:

Originally Posted by LostMy65

Free
- Local - Oregon City
6 - Dually Wheels with nice tires. 8 Lug. 16.5 Dia.

shipping an option if i pay?

**LostMy65** · 09-19-2015, 02:26 PM

Quote:

Originally Posted by jteck10

shipping an option if i pay?

If I can just drop them off someplace and someone else takes care of them from there, sure.

jteck10 · 09-19-2015, 03:15 PM

Quote:

Originally Posted by LostMy65

If I can just drop them off someplace and someone else takes care of them from there, sure.

ill pm you

**LostMy65** · 10-31-2015, 12:40 PM

Quote:

Originally Posted by LostMy65

Free
- Local - Oregon City
6 - Dually Wheels with nice tires. 8 Lug. 16.5 Dia.

Still got these.

jteck10 · 11-03-2015, 08:04 PM

Quote:

Originally Posted by LostMy65

Still got these.

i might have already reached out to you about these. do you have pics? im in the bay area, ca

HumphreyMurdoch · 09-20-2015, 09:02 PM

I've got a few pieces I saved off my '62 that are free to anyone who can use them.

Rear step bumper. I had to cut off one of the brackets but its a straight cut and should be pretty easy to reuse. It's really heavy.

[IMG]

[/IMG]

[IMG]

[/IMG]

I also have both lower control arms with the torsion bars still in them, H032 center section and both axle shafts still available if anyone is interested.

I can post pics of the other stuff if needed.

I'd really prefer not to ship these, but if ya really need it I'll see what I can do.

62 bigwindow · 09-20-2015, 09:17 PM

Factory gauges from I believe 64 with warning lights
was in a load of parts I got looks to be in decent shape but noticed the speedo needle is MIA..if anybody needs one for parts or can fix the needle you are welcome to it just toss in a little for shipping.. I am in NC

**tigerburns** · 09-21-2015, 11:00 AM

Quote:

Originally Posted by 62 bigwindow

Factory gauges from I believe 64 with warning lights
was in a load of parts I got looks to be in decent shape but noticed the speedo needle is MIA..if anybody needs one for parts or can fix the needle you are welcome to it just toss in a little for shipping.. I am in NC

I could use it for some parts on one that I am restoring now. What would shipping to 29662 be?

matt_l · 10-13-2015, 10:59 AM

Inline 6 250 casting number 366855. Still in truck and you can hear it run.. Has some issues and runs on the hot side. I am switching over to an LS motor, and if anyone can use it, come and get it. I am in Milford MI. You can also have the three speed manual transmission. If no one wants it, I am just going to scrap it.

blown240 · 10-13-2015, 11:46 AM

Oh Man! I wish you were closer!

zplightning · 10-14-2015, 11:56 AM

I have a Classic Performance Trac Bar 6364DATB, which is supposedly made for 63-64 trucks. Brand new, with attempted installation marks on it.

I bought it from Summit, and I can't get it to fit for the life of me, I am sure it user error but I could use some good karma and I'm just going to put new bushings in my stock bar.

Here is the exact one: http://www.summitracing.com/parts/cl...datb/overview/

I think it's missing a lock nut on it from trying to get it on, but I think it can be used as is or replaced (you can still lock the bar from spinning with one nut)

Please don't ask for this to resell, if you've got a lowered 63-64 and can pay shipping, I will send it to you.

-Zac

Raptor0206 · 10-14-2015, 12:07 PM

Quote:

Originally Posted by zplightning

I have a Classic Performance Trac Bar 6364DATB, which is supposedly made for 63-64 trucks. Brand new, with attempted installation marks on it.

I bought it from Summit, and I can't get it to fit for the life of me, I am sure it user error but I could use some good karma and I'm just going to put new bushings in my stock bar.

Here is the exact one: http://www.summitracing.com/parts/cl...datb/overview/

I think it's missing a lock nut on it from trying to get it on, but I think it can be used as is or replaced (you can still lock the bar from spinning with one nut)

Please don't ask for this to resell, if you've got a lowered 63-64 and can pay shipping, I will send it to you.

-Zac

PM sent

zplightning · 10-15-2015, 01:27 PM

Quote:

Originally Posted by zplightning

I have a Classic Performance Trac Bar 6364DATB, which is supposedly made for 63-64 trucks. Brand new, with attempted installation marks on it.

I bought it from Summit, and I can't get it to fit for the life of me, I am sure it user error but I could use some good karma and I'm just going to put new bushings in my stock bar.

Here is the exact one: http://www.summitracing.com/parts/cl...datb/overview/

I think it's missing a lock nut on it from trying to get it on, but I think it can be used as is or replaced (you can still lock the bar from spinning with one nut)

Please don't ask for this to resell, if you've got a lowered 63-64 and can pay shipping, I will send it to you.

-Zac

This is still available if anyone has a 63 or 64 truck to put this on (it won't fit other years)

1963c-10 · 10-16-2015, 09:18 AM

Quote:

Originally Posted by zplightning

This is still available if anyone has a 63 or 64 truck to put this on (it won't fit other years)

Im interested if its still available. PM sent

jlwilliams598 · 10-21-2015, 08:03 AM

62 bigwindow, did anyone get the gauges from you? I am in Charleston and could use them if you still have them.

**slepysal** · 10-27-2015, 10:33 AM

Quote:

Originally Posted by jlwilliams598

62 bigwindow, did anyone get the gauges from you? I am in Charleston and could use them if you still have them.

I might have one I can check for you

**jayoldschool** · 10-27-2015, 07:04 PM

Yep, replied to your PM.

The_Hub · 11-01-2015, 08:17 PM

Could anyone use a stock fuse block off a '60? I've got a good bit of the wiring still too. Just cover the shipping and I'll send it out. Corrosion free too.

**slepysal** · 11-06-2015, 12:36 PM

Quote:

Originally Posted by The_Hub

Could anyone use a stock fuse block off a '60? I've got a good bit of the wiring still too. Just cover the shipping and I'll send it out. Corrosion free too.

hi shipping to Ca 95131?

09-08-2015, 08:01 PM	#1
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: The 60-66 "PAYING IT FORWARD" thread! I have a 250 6 cylinder engine and 3 speed trans in a 66 I am going to scrap. Engine appears to be in good shape and according to the previous owner ran till he got working on it. Free to anyone who wants to come and get it. Located in south east Virginia. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

09-11-2015, 12:49 AM	#2
rudyyloverboiii Registered User Join Date: Nov 2014 Location: IE California Posts: 225	Re: The 60-66 "PAYING IT FORWARD" thread! I also have the west coast mirrors That are a little worn down and a manual steering box that might need a new bearing. (Has play)

09-11-2015, 09:20 PM	#4
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: The 60-66 "PAYING IT FORWARD" thread! the windshield went to Josh jteck10. __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

09-18-2015, 06:19 PM	#6
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,522	Re: The 60-66 "PAYING IT FORWARD" thread! Free - Local - Oregon City 6 - Dually Wheels with nice tires. 8 Lug. 16.5 Dia. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035 Last edited by LostMy65; 09-18-2015 at 06:31 PM.

09-20-2015, 09:02 PM	#12
HumphreyMurdoch Registered User Join Date: May 2012 Location: Murphy, MO Posts: 172	Re: The 60-66 "PAYING IT FORWARD" thread! I've got a few pieces I saved off my '62 that are free to anyone who can use them. Rear step bumper. I had to cut off one of the brackets but its a straight cut and should be pretty easy to reuse. It's really heavy. [IMG][/IMG] [IMG][/IMG] I also have both lower control arms with the torsion bars still in them, H032 center section and both axle shafts still available if anyone is interested. I can post pics of the other stuff if needed. I'd really prefer not to ship these, but if ya really need it I'll see what I can do. __________________ '62 C10 LWB fleet side. 283 w/ a T5

09-20-2015, 09:17 PM	#13
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	Re: The 60-66 "PAYING IT FORWARD" thread! Factory gauges from I believe 64 with warning lights was in a load of parts I got looks to be in decent shape but noticed the speedo needle is MIA..if anybody needs one for parts or can fix the needle you are welcome to it just toss in a little for shipping.. I am in NC Attached Images

10-13-2015, 10:59 AM	#15
matt_l Registered User Join Date: Jan 2013 Location: Milford, MI Posts: 159	Re: The 60-66 "PAYING IT FORWARD" thread! Inline 6 250 casting number 366855. Still in truck and you can hear it run.. Has some issues and runs on the hot side. I am switching over to an LS motor, and if anyone can use it, come and get it. I am in Milford MI. You can also have the three speed manual transmission. If no one wants it, I am just going to scrap it. Attached Images __________________ Matt Father Son 66 Build: http://67-72chevytrucks.com/vboard/s...d.php?t=564694

10-13-2015, 11:46 AM	#16
blown240 Registered User Join Date: Jan 2011 Location: CA Posts: 772	Re: The 60-66 "PAYING IT FORWARD" thread! Oh Man! I wish you were closer! __________________ '61 Panel - Helms Bakery Truck - Daily Driver - FOR SALE

10-14-2015, 11:56 AM	#17
zplightning Registered User Join Date: Jul 2014 Location: San Diego, CA Posts: 77	Re: The 60-66 "PAYING IT FORWARD" thread! I have a Classic Performance Trac Bar 6364DATB, which is supposedly made for 63-64 trucks. Brand new, with attempted installation marks on it. I bought it from Summit, and I can't get it to fit for the life of me, I am sure it user error but I could use some good karma and I'm just going to put new bushings in my stock bar. Here is the exact one: http://www.summitracing.com/parts/cl...datb/overview/ I think it's missing a lock nut on it from trying to get it on, but I think it can be used as is or replaced (you can still lock the bar from spinning with one nut) Please don't ask for this to resell, if you've got a lowered 63-64 and can pay shipping, I will send it to you. -Zac

10-21-2015, 08:03 AM	#21
jlwilliams598 Registered User Join Date: Oct 2012 Location: Jackson, TN Posts: 11	Re: The 60-66 "PAYING IT FORWARD" thread! 62 bigwindow, did anyone get the gauges from you? I am in Charleston and could use them if you still have them.

10-27-2015, 07:04 PM	#23
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,156	Re: The 60-66 "PAYING IT FORWARD" thread! Yep, replied to your PM.

11-01-2015, 08:17 PM	#24
The_Hub Registered User Join Date: Oct 2015 Location: Ward, Arkansas Posts: 98	Re: The 60-66 "PAYING IT FORWARD" thread! Could anyone use a stock fuse block off a '60? I've got a good bit of the wiring still too. Just cover the shipping and I'll send it out. Corrosion free too.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.