Tractor thread?

[special-K]

Originally Posted by 62c30

From Graceland

I think that's the model the guy who's place I'm working on has, a '72 with bucket. His is a beater. We used it the other day to move a 20' laminated beam. It's sitting there idling and rattling, then "tink!" and I notice something drop to the ground. The hydraulic pump broke. He's a funny guy. He's looking at the part saying, "it's been rattling like that for years. Why did it have to break now? Look, you can see it wore because the bolt was missing". Uh yeah? The good thing is the dealer had some parts and ordered the rest

Originally Posted by Killer Bee

thanks for all the pictures!

looks like I need to get out more, got some traveling to do when I retire

You and me both. I think we need a museum thread in the meantime. I keep hearing about more and more.

Originally Posted by 62c30

Here are some from the Waterloo engine works I believe. It's been about 7-8 years ago

That place must be amazing.

More from the local show. We have several shows like this around the region. Last picture is the Barnes Bros and a son running the rock crusher

[62c30]

John Deere world headquarters about 6-7 years ago. Mostly just had new stuff on display.

[ckfarm]

Originally Posted by 62c30

From Graceland

If you notice the front edge of the hood still has some dents in it.I read a story about the students restoring the tractor where not allowed to straiten them because Elvis was the one who put them in there!

[Killer Bee]

thanks for sharing - and naturally I had to read more

Elvis Presley's John Deere 4010
The inside story of restoring Stella.



Elvis Presley’s original John Deere tractor on display in Graceland

[62c30]

Originally Posted by ckfarm

If you notice the front edge of the hood still has some dents in it.I read a story about the students restoring the tractor where not allowed to straiten them because Elvis was the one who put them in there!

I remember hearing that and for some reason I thought that it was listed on the sign. Obviously I didn't read it before I posted it. On my 61 Apache 10 that was my grandpa's there is a bullet hole from the inside out but it just left a "nipple" and didn't go through the outside door skin. After visiting Graceland I thought about leaving it after hearing the story.

[special-K]

That's cool to see. I used to have two early 110s. The fenders were steel. I ran them many years. I still have the accessory book I got at the dealership. Mine had 8hp Kohlers. I had a JD 80 dump cart, too. I decided the early Cub Cadets were a better tractor and sold all my JD stuff to a collector. I bought the first one at a local JD dealership who holds a sale each spring to sell off all the year's trade-in. There were so many early tractor company lawn tractors it drove me crazy, Case, Massey Ferguson, etc. And a mess of quality ones like Wheel Horse, Simplicity, Gravely. Then there were so unique ones I never saw before, different designs like one that was a reel mover. The second 110 was set out for sale on Main St in my town. I forget why he was selling it but he had just had the transmission rebuilt at the dealership and he wanted $200. That's the one I mowed most with

[62c30]

And here's my junk. John Deere 140 h3, Farmall 230 that was my grandad's, and a John Deere 3038e I bought new in 2012

[special-K]

Originally Posted by 62c30

And here's my junk. John Deere 140 h3, Farmall 230 that was my grandad's, and a John Deere 3038e I bought new in 2012

Looks like you're pretty well set. That's a nice IH, a great size

Meanwhile, back at the tractor show. I'm throwing a road grader and some crawlers if that's ok

[biketopia]

Those of you that like to travel/RV/boondock etc, the keystone tractor museum in Petersburg has overnight parking and I believe they also have hookups. There is also a little cafe that is supposed to have some pretty decent food.

[special-K]

The sandwich I had for lunch was good. I thought I had a whole slew of pictures from there, but don't see them now. That settles it. I have to go back now. I haven't been back since they expanded

More from the gas & steam show

[special-K]

I worked this weekend on a friend's '72 John Deere 2520 Row Crop w/loader. It needs a hydraulic pump. I was doing some carpentry work for him and he was moving a TGI beam suspended from the bucket. Sitting there idling I thought it was rattling a good bit. This guy isn't much on maintenance so I wasn't surprised. Then "TINK" and I notice something drop under the tractor. It was the coupler to the pump had broken. time for some maintenance-free repairs . It turns out the pump had been leaking, which he knew about. So, this weekend I dismantled it down to the pump. The parts should be here by Wed. I'll upload the pictures of the tractor and edit them in

[DeadheadNM]

Here’s a real clean IH that sold at a local auction yesterday for $7500. Several others sold but I was at the other ring. Did see this JD lawn tractor and this old Kubota.

[Getter-Done]

What about this Young guy from Ky.

This Kentucky truck promposal goes viral online -...

[72 tigger]

Originally Posted by Getter-Done

What about this Young guy from Ky.

This Kentucky truck promposal goes viral online - YouTube

That’s pretty cool

[straight6chevyguy]

why did I not know about this thread until just now? lol. Subbed.

[DeadheadNM]

Shop vac trick to avoid a lot of hydraulic fluid loss when changing filters on some Kubotas (at time 11:21) - I'm due for a filter change so might try this

Use a Shop Vac to Prevent Loosing Hydraulic Oil...

[Killer Bee]

Originally Posted by DeadheadNM

Shop vac trick to avoid a lot of hydraulic fluid loss when changing filters on some Kubotas (at time 11:21) - I'm due for a filter change so might try this

Use a Shop Vac to Prevent Loosing Hydraulic Oil on a filter change! Kubota M owners must watch! - YouTube

gee whiz, don't tell everyone our secrets

actually works quite well on a lot of machines, I was shown this technique back in the mid 90's

couple of pro tips;

select an old vac you wouldn't miss if it were ruined for anything else. needs to be big enough to hold the whole compartment just in case, and healthy enough to carry on through the whole process and not poop out mid way

clean vac of ALL dirt inside and rig for wet operation. small amounts of fluid will be picked up and carried into the canister. make clean-up easy on yourself

don't position suction hose too close to fluid level. vac will pick up small droplets to full on stream of fluid without sufficient air gap. you may have to create small air bleed holes in the connection, too great of a seal will simply evactuate the compartment into the vac canister

utilize a helper to hold suction hose or fasten it really, really well. use your imagination to picture the scene when hose flops off while you're laying underneath with filter removed

have sufficient size drain pan positioned directly under filter or fitting being removed along with splash shield (cardboard is good for one-time use) and a few shop rags

have filter, fitting, etc. prepped for the swap including any gaskets, seals and tools needed

the gurgling is normal. don't be alarmed, it's supposed to sound like the end of a good milkshake

good luck!

[Killer Bee]

these also work great for cooling system work like changing b/o fittings, filters, even block heaters

good ones have an air regulator or ball valve to adjust vacuum

https://www.amazon.com/BILITOOLS-Rad...dp/B0CBV63NS9/

[DeadheadNM]

Thanks for the pro tips!

Turns out, somewhere the rubber plug for my hydraulic/trans fluid vanished. Last night I went to inspect things and when I lifted my seat I was staring into a bare a$$ hole. So, I'll be exchanging all the fluid this time around and will try the shop vac trick at time of the next filter change.

[Rickysnickers]

Reviving this thread. I'm potentially looking for a tractor, used of course. What are things to look at when purchasing a used tractor? I've never owned one. Are they a maintenance nightmare, or fairly easy to maintain? I would prefer one in the 30-40hp range. There's a Kioti listed locally that's supposedly almost brand new, 80 something hours on it. Are these a decent brand? Thanks for any input.

[biketopia]

Originally Posted by Rickysnickers

Reviving this thread. I'm potentially looking for a tractor, used of course. What are things to look at when purchasing a used tractor? I've never owned one. Are they a maintenance nightmare, or fairly easy to maintain? I would prefer one in the 30-40hp range. There's a Kioti listed locally that's supposedly almost brand new, 80 something hours on it. Are these a decent brand? Thanks for any input.

Kioti are pretty much knock off Kubotas, but a pretty stout machines. IF there is a dealer close to you I probably wouldn't hesitate to much. I almost bought a Kioti brand new in 2021 but I was going to have to wait 6-12 weeks. Drove 2 hours away and got my Kubota with 102hrs for significantly less. What tasks are you hoping to realistically accomplish with your tractor, what's your budget, and how handy are you? I own a Kubota B2650, 26HP tractor with a loader and plethora of 3pt attachments. I'd suggest perusing the below link. I'm a member there and the buying advice section is super helpful. You need to be honest with yourself on the terrain around your place and end goals for use.

https://www.orangetractortalks.com/f...ice-pricing.9/

[farmall]

Originally Posted by Rickysnickers

Reviving this thread. I'm potentially looking for a tractor, used of course. What are things to look at when purchasing a used tractor? I've never owned one. Are they a maintenance nightmare, or fairly easy to maintain? I would prefer one in the 30-40hp range. There's a Kioti listed locally that's supposedly almost brand new, 80 something hours on it. Are these a decent brand? Thanks for any input.

Kioti is a decent tractor. Just as good as the other big names.
Google Kioti Bobcat Doosan Daedong.
The loaders and backhoes are installed in the USA. Not made by the tractor company.
I would not buy any tractor with tier 4 emissions.
I like my antiques. Just bought a Ford Golden Jubilee.

11 years at a Kioti, Mahindra, Branson, Gehl dealership.

[Rickysnickers]

Thanks fellas. My plans are to do some clearing. We live in Boise area and own 10 acres. I would like to keep all the cheat grass and sage brush down to a minimum as to avoid as much potential wild fire hazard as possible. After mowing as much as possible, there are some pretty steep slopes on the property, use an implement to level out everything and get rid of as many badger holes as I can. In addition, using it for clearing snow from the driveway, about 100 yards long.

Realistic budget is south of $25K

[biketopia]

$25k is decent budget and with land work you'll want weight to accomplish those tasks. I would be looking for something comparable to the L or LX series from Kubota. The L 2501 is a very popular model, punches above it's class, but you are limited to only 19hp at the PTO and 25 engine. My B2650 is the predecessor to that machine and has been fantastic for my needs. You may find a B2650 or a B3350 in good shape. I was prepared to spend about the same during Covid for a tractor when we bought our 5 acres. I needed one and couldn't wait months for one to maybe come in. Found the B2650 with front end loader and SSQA bucket for $14k, 102 hours, 2 years old, still under warranty. The "same" tractor was over 25k new from Kubota, John Deere was closer to 30k, Kioti was like 26k

The non ECU controlled ones are relatively trouble free and just normal maintenance, grease them, and run good fuel they'll give you years of good service. What model is the Kioti you found? A backhoe can be handy on one of these machines, but it will add a significant cost ($5-7k) to a new or used machine. A rented mini ex can be much more capable for a better price depending on your needs. Also, a subframe mounted backhoe will need to come off and be stored anytime you want to hook up a 3pt accessory like a box blade, rear snow blower, rear blade, wood chipper, etc.

Typically with the well known manufactures, they don't depreciate like a used car, they'll hold a lot of value if decently taken care of. I would stay away from a geared tractor for ease of use. You won't want to try and find a front end loader after the purchase unless you find a deal of all deals and the loader is available new. I would not be scared of tier 4 emissions. You may want to look for a cabbed model for the snow removal part, but if you have woods you'll be driving around in, the cab can get cumbersome and broken windows get expensive. You'll want a machine with a mid mount PTO if you want to easily run a front mounted snow blower. Then you can get into all the fun of a 3rd function up front, rear remotes, etc. Highly recommend a skid steer quick attach style front bucket versus pin on, or john Deere's proprietary quick attach. I swap from bucket, to forks, to grapple all the time. Loader forks are an amazing accessory to have with a tractor.

Lastly compare specs of what you find and look for real world recommendations if possible. On Orange Tractor Talks it gets brought up that some manufactures inflate their specs like loader lift capacity to seem significantly better than a comparable size Kubota. A front pivot axle tractor can flip over on flat ground if you operate it wrong enough. I got mine a very tippy the other day unloading a 350 from my brothers truck because I was being lazy and didn't want to hook up the box blade for some counter weight or grab a chain to lift evenly with my forks, had to stop and get a chain.

https://www.tractordata.com/farm-tra...ota-b2650.html

[Killer Bee]

Kubota.