When Free Isn't Cheap Enough... - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ChevyRedneck · 10-11-2007, 02:19 PM

Ok, maybe not then

That's definitely not the same exhaust manifolds or valve covers!

So what's the deal with the hose on the front of the motor then?

Frizzle Fry · 10-11-2007, 02:20 PM

It's hard to say from that angle but I did know about the novelty of the GMC 305s when those pics were taken so I think I would have remembered it being a 6, maybe not

So if it's an SBC it's likely a 350?

70rs/ss · 10-11-2007, 02:36 PM

I am thinking it may be an early 69 so it could have a 327, the intake and exhaust looks to be 327 with no accesory holes in the heads (alt is mounted to the ramhorn). That is a chev fender on the driver's side the 68-72 GMC fenders are the same as 68 chev's.

jorgensensc · 10-11-2007, 02:39 PM

Quote:

Originally Posted by Frizzle Fry

I'm no GMC guru so who can tell me what this engine is (1969)?

I see 4 spark plug wire boots on the engine where the spark plugs connect. the third one back is hard to see, but you can see the wire running to it. I'm guessing v8.

67ChevyRedneck · 10-11-2007, 02:44 PM

^I see it now, for the #5 cylinder, it almost looks burned up

Frizzle Fry · 10-11-2007, 03:12 PM

It's an 8. I see the wires. But is it a 327 or 350?

skokie · 10-11-2007, 04:10 PM

Mike

Good eyes there. I can barely see it but looking at the bottom alternator mount it appears that it is attached to the exhaust manifold. I am guessing that its a 327. Plus the oil fill tube at the top near the radiator hose.

Frizzle Fry · 10-12-2007, 01:39 AM

Sweet. Never owned one before

68shortfleet · 10-12-2007, 02:16 AM

Has this truck been rescued yet? I'm a few miles away in Newberg. Would not mind lending a hand if i can find out when it's happening..

Jason

**truckdude239** · 10-12-2007, 07:05 AM

looks like a 327

Frizzle Fry · 10-12-2007, 02:37 PM

Quote:

Originally Posted by 68shortfleet

Has this truck been rescued yet? I'm a few miles away in Newberg. Would not mind lending a hand if i can find out when it's happening..

Jason

Cool, thanks for the offer. We're going to pull her out this Sunday the 14th. PM me your number and I'll give you a call if we need anything or if you just want to join the fun I'll give you the address.

Same goes for anyone else

skokie · 10-12-2007, 08:35 PM

I gotta know. When you get it out post up the # off of the back of the block

Frizzle Fry · 10-12-2007, 09:59 PM

Doh! The property owner finally got back to me and said this weekend is no good. So we're now shootin for the 20th or 21st (confirmed with owner). So now I'm in need of a 4x4 looking to flex it's muscles a little bit on the 20th or 21st. A winch wouldn't hurt either.

stllookn · 10-14-2007, 05:15 PM

And what a shame that is since this turned out to be such a nice weekend. I am hunting birds in EA WA next weekend so I am going to miss it again!!!!!

poorboy · 10-14-2007, 06:10 PM

some of the 327's had a breather next to the dist. Some people remove them and replace it with a freeze plug.

Robert1970C20rstbukt · 10-15-2007, 12:12 AM

The engine could be a 283 or 327, what's the casting number on the block? It's right in front of the passenger side cylinder head, it'll tell you the year and displacement.

Frizzle Fry · 10-15-2007, 03:49 PM

Quote:

Originally Posted by Robert1970C20rstbukt

The engine could be a 283 or 327, what's the casting number on the block? It's right in front of the passenger side cylinder head, it'll tell you the year and displacement.

If I had it in front of me we wouldn't be having this discussion

I'll post the numbers once I get it though!

Frizzle Fry · 10-15-2007, 03:54 PM

Quote:

Originally Posted by stllookn

And what a shame that is since this turned out to be such a nice weekend. I am hunting birds in EA WA next weekend so I am going to miss it again!!!!!

I know, and now I lost my 4x4 and trailer...

Might have to rent a trailer from UHaul.

FingerTight · 10-15-2007, 04:30 PM

can't wait to see pix of this one, get 'er done gentlemen!

stllookn · 10-15-2007, 04:33 PM

Mike, Where are you going to store it? I have a nice tow bar and a set of lights you could borrow. Now that weather has turned it is going to be slippery on that haul out of the weeds. That does look like a 327/283 intake with the filler. I've got a couple of them here.

Frizzle Fry · 10-16-2007, 07:47 PM

Looks like I may have the man/machine power lined up.

I'm waiting on a call back for another trailer... but if it comes down to it I'll rent one. Still have a couple options on storage. It looks like I may move to a new place in Dec where storage will not be an issue

XXL · 10-17-2007, 10:16 PM

Quote:

Originally Posted by Frizzle Fry

A winch wouldn't hurt either.

Huh?

herb101 · 10-17-2007, 10:45 PM

Quote:

Originally Posted by XXL

Huh?

I WANT ONE OF THOSE ON THE FRONT OF MY BLAZER!!

Herb

Frizzle Fry · 10-18-2007, 11:18 AM

Quote:

Originally Posted by XXL

Huh?

I got one of those lined up for this weekend just for you XXL...

Frizzle Fry · 10-18-2007, 11:27 AM

Quote:

Originally Posted by stllookn

Mike, Where are you going to store it?

I now have two trailer options and a place to put it until I move in Dec

For those asking what I'm going to do with it; I've been looking at a house with some property and a shop. So if I get this place I'm gonna need a truck to use as a real truck. This one will be perfect, especially if it turns out to be a 3/4 ton

Of coarse I'll tinker with it and won't be able to resist making it a nice driver, but it won't be going on a C5 chassis

10-11-2007, 02:19 PM	#126
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: When Free Isn't Cheap Enough... Ok, maybe not then That's definitely not the same exhaust manifolds or valve covers! So what's the deal with the hose on the front of the motor then? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 10-11-2007 at 02:19 PM.

10-11-2007, 02:20 PM	#127
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: When Free Isn't Cheap Enough... It's hard to say from that angle but I did know about the novelty of the GMC 305s when those pics were taken so I think I would have remembered it being a 6, maybe not So if it's an SBC it's likely a 350?

10-11-2007, 02:36 PM	#128
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: When Free Isn't Cheap Enough... I am thinking it may be an early 69 so it could have a 327, the intake and exhaust looks to be 327 with no accesory holes in the heads (alt is mounted to the ramhorn). That is a chev fender on the driver's side the 68-72 GMC fenders are the same as 68 chev's.

10-11-2007, 02:44 PM	#130
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: When Free Isn't Cheap Enough... ^I see it now, for the #5 cylinder, it almost looks burned up __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

10-11-2007, 03:12 PM	#131
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: When Free Isn't Cheap Enough... It's an 8. I see the wires. But is it a 327 or 350? Attached Images

10-11-2007, 04:10 PM	#132
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,344	Re: When Free Isn't Cheap Enough... Mike Good eyes there. I can barely see it but looking at the bottom alternator mount it appears that it is attached to the exhaust manifold. I am guessing that its a 327. Plus the oil fill tube at the top near the radiator hose. __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

10-12-2007, 01:39 AM	#133
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: When Free Isn't Cheap Enough... Sweet. Never owned one before

10-12-2007, 02:16 AM	#134
68shortfleet Registered User Join Date: Oct 2006 Location: Dundee, Oregon Posts: 311	Re: When Free Isn't Cheap Enough... Has this truck been rescued yet? I'm a few miles away in Newberg. Would not mind lending a hand if i can find out when it's happening.. Jason

10-12-2007, 07:05 AM	#135
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: When Free Isn't Cheap Enough... looks like a 327 __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

10-12-2007, 08:35 PM	#137
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,344	Re: When Free Isn't Cheap Enough... I gotta know. When you get it out post up the # off of the back of the block __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

10-12-2007, 09:59 PM	#138
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: When Free Isn't Cheap Enough... Doh! The property owner finally got back to me and said this weekend is no good. So we're now shootin for the 20th or 21st (confirmed with owner). So now I'm in need of a 4x4 looking to flex it's muscles a little bit on the 20th or 21st. A winch wouldn't hurt either.

10-14-2007, 05:15 PM	#139
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: When Free Isn't Cheap Enough... And what a shame that is since this turned out to be such a nice weekend. I am hunting birds in EA WA next weekend so I am going to miss it again!!!!! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

10-14-2007, 06:10 PM	#140
poorboy Senior Member Join Date: Jun 2006 Location: Oregon City, Or Posts: 758	Re: When Free Isn't Cheap Enough... some of the 327's had a breather next to the dist. Some people remove them and replace it with a freeze plug. __________________ 63 short fleet Patina build http://67-72chevytrucks.com/vboard/s...d.php?t=287751 Man I want another one.

10-15-2007, 12:12 AM	#141
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Re: When Free Isn't Cheap Enough... The engine could be a 283 or 327, what's the casting number on the block? It's right in front of the passenger side cylinder head, it'll tell you the year and displacement. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

10-15-2007, 04:30 PM	#144
FingerTight So there I was... Join Date: Aug 2007 Location: Malibu, CA Posts: 81	Re: When Free Isn't Cheap Enough... can't wait to see pix of this one, get 'er done gentlemen! __________________ - Rick 1969 C10 LWB, leafs, 350/700R4, 2003 Yukon Denali



Register or Log In To remove these advertisements.

10-15-2007, 04:33 PM	#145
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: When Free Isn't Cheap Enough... Mike, Where are you going to store it? I have a nice tow bar and a set of lights you could borrow. Now that weather has turned it is going to be slippery on that haul out of the weeds. That does look like a 327/283 intake with the filler. I've got a couple of them here. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

10-16-2007, 07:47 PM	#146
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: When Free Isn't Cheap Enough... Looks like I may have the man/machine power lined up. I'm waiting on a call back for another trailer... but if it comes down to it I'll rent one. Still have a couple options on storage. It looks like I may move to a new place in Dec where storage will not be an issue

Register or Log In To remove these advertisements.