How about some pics of High Performance haulers. - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

coolblue69chev · 05-14-2009, 03:47 AM

Quote:

Originally Posted by coolblue69chev

Heres mine as well...Driver..69 c/10 .040 over now a 357 with flat top pistons,dual pattern hyd. cam .488 and .504 lift,rhodes lifters,angle plug iron heads, ,Th400 trans,roller rockers,pink rods,gapless second ring,10:44-1 compression,dominator II intake,Holley 660 carb,
last year I changed the trans and torque converter from 2800 stall to 3500 stall,28 inch tall tire to a 26, and slipping badley in drive as soon as I hit drive down the track it still ran 13.09 @101 mph my 60ft times went from 1.90 to 1.77 should be interesting to see what happens with a good trans i am guessing 12.60s to 12.70s.. Best et with other converter (2800 stall) and 28 in tall tire was 12.96 @103.73 in the 1/4 mi 8.19 @ 84.96 in the 1/8th....

Ok so now it is done and it ran 1.731 60ft , 8.03 1/8 and so far 12.804 1/4 I guess the trans was slipping just a tad!!!!!

coolblue69chev · 05-14-2009, 04:01 AM

Quote:

Originally Posted by coolblue69chev

Ok so now it is done and it ran 1.731 60ft , 8.03 1/8 and so far 12.804 1/4 I guess the trans was slipping just a tad!!!!!

Heres another before installing the fuel cell!!!

redhead69 · 06-04-2009, 09:04 PM

Nice one Robert! I cant wait till you let me drive it!

limitedstreetoutlaw · 06-29-2009, 07:14 PM

hey all new here. i must say you all have some really nice trucks. here are some pic's of my 68 farmtruck. you can go to FQuick.com and search members for limitedstreetoutlaw for more pics

newst pic right after new engine/trans and exhaust install

new dart headed 410ci small block

this pic is the oldest exhaust hanging down back then

________________________________
1968 c-10 stepside "THE GRAPE APE"
all motor
1.56...60ft
7.41...1/8
89.41..1/8

69trk · 06-29-2009, 07:56 PM

very nice truck. what brand of lift off hood is that?

limitedstreetoutlaw · 06-30-2009, 12:17 PM

Thanks its a unlimited products hood heres the link http://up22.com/

_______________________________
1968 c-10 stepside "THE GRAPE APE"
all motor
1.56...60ft
7.41...1/8
89.41..1/8

djracer · 06-30-2009, 12:18 PM

Man that looks allot like mine did when I bought it from Tom.

limitedstreetoutlaw · 07-01-2009, 12:05 PM

yea i know i thought the sam thing after i saw those pic's on here

_______________________________
1968 c-10 stepside "THE GRAPE APE"
all motor
1.56...60ft
7.41...1/8
89.41..1/8

68 C-10 KID · 07-09-2009, 01:10 AM

New tilt column, and the night I ran a 12.0 before I rolled the sprag and ruined the drum.

joeys66pickup · 07-09-2009, 02:23 AM

that is one damn clean engine bay for a truck that gets driven!

i have seen your truck at the track, but i didnt know if it was you..
next time i will have to come up an say hi to a fellow young gun

68 C-10 KID · 07-09-2009, 07:18 AM

always stop bye and shoot the ****. I should be racing at Woodburn July 25 and Aug 1st.
Aug 1st is the thunder truck drags.

thanks for the comments.

limitedstreetoutlaw · 07-10-2009, 11:29 AM

nice truck 68 c-10 kid i like that color

_______________________________
1968 c-10 stepside "THE GRAPE APE"
all motor
1.56...60ft
7.41...1/8
89.41..1/8

jgh64pkup · 07-10-2009, 01:27 PM

Quote:

Originally Posted by limitedstreetoutlaw

hey all new here. i must say you all have some really nice trucks. here are some pic's of my 68 farmtruck. you can go to FQuick.com and search members for limitedstreetoutlaw for more pics

newst pic right after new engine/trans and exhaust install

new dart headed 410ci small block

this pic is the oldest exhaust hanging down back then

that is a very nice truck

limitedstreetoutlaw · 07-11-2009, 01:13 AM

Thanks jgh64pkup

_______________________________
1968 c-10 stepside "THE GRAPE APE"
all motor
1.56...60ft
7.41...1/8
89.41..1/8

nxtruck · 07-11-2009, 04:16 PM

Hey guys, I thought I'd put some pics of mine in here. The pics of it with the snorkel hood are about 10 or so years old and it now has the cowl hood on it. I've had several motors in it and, right now, it has a pump gas 434 sbc in it.

nxtruck · 07-11-2009, 04:27 PM

If anyone knows how to line my pics up better, let me know. Sorry for the cluster____ I created with my pics.

jgh64pkup · 07-11-2009, 08:58 PM

Quote:

Originally Posted by nxtruck

If anyone knows how to line my pics up better, let me know. Sorry for the cluster**** I created with my pics.

after every [IMG] press enter
does that alternator fit without any clearancing

Quote:

Originally Posted by limitedstreetoutlaw

Thanks jgh64pkup

hey limitedstreetoutlaw what headers are those

nxtruck · 07-11-2009, 09:45 PM

OK, thanks. I'm not the most computer-friendly individual, so I figured that I did good just getting the pics on here.
As far as the low-mount alt. goes, yes, it fit without doing anything to the frame.

jgh64pkup · 07-11-2009, 09:58 PM

cool is that a stardard size alt.

nxtruck · 07-12-2009, 08:42 AM

Yes, it's a standard size alternator.

limitedstreetoutlaw · 07-14-2009, 11:35 AM

hey jgh64pkup the headers are Hooker Super comps 1 3/4 62-67 chevy2 nova

_______________________________
1968 c-10 stepside "THE GRAPE APE"
all motor
1.56...60ft
7.41...1/8
89.41..1/8

jgh64pkup · 07-14-2009, 11:39 AM

any issues with fitment

limitedstreetoutlaw · 07-14-2009, 12:06 PM

no issues gave me more ground clearance over my old truck headers
guess i should say if your looking at the last side pic thats my old headers and exhaust setup
they were small tube dynomax headers/w x pipe and flowmasters

_______________________________
1968 c-10 stepside "THE GRAPE APE"
all motor
1.56...60ft
7.41...1/8
89.41..1/8

paul1969 · 07-18-2009, 06:40 PM

just wanted to say thanks for all the good pics through out the whole website u guys are awsome more pics soon to come.

paul1969 · 07-18-2009, 07:19 PM

06-04-2009, 09:04 PM	#128
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	Re: How about some pics of High Performance haulers. Nice one Robert! I cant wait till you let me drive it! __________________ Currently truckless

06-29-2009, 07:14 PM	#129
limitedstreetoutlaw Registered User Join Date: Jun 2009 Location: Arkoma OK Posts: 134	Re: How about some pics of High Performance haulers. hey all new here. i must say you all have some really nice trucks. here are some pic's of my 68 farmtruck. you can go to FQuick.com and search members for limitedstreetoutlaw for more pics newst pic right after new engine/trans and exhaust install new dart headed 410ci small block this pic is the oldest exhaust hanging down back then ________________________________ 1968 c-10 stepside "THE GRAPE APE" all motor 1.56...60ft 7.41...1/8 89.41..1/8 Last edited by limitedstreetoutlaw; 11-18-2009 at 04:23 PM.

06-29-2009, 07:56 PM	#130
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: How about some pics of High Performance haulers. very nice truck. what brand of lift off hood is that? __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

06-30-2009, 12:17 PM	#131
limitedstreetoutlaw Registered User Join Date: Jun 2009 Location: Arkoma OK Posts: 134	Re: How about some pics of High Performance haulers. Thanks its a unlimited products hood heres the link http://up22.com/ _______________________________ 1968 c-10 stepside "THE GRAPE APE" all motor 1.56...60ft 7.41...1/8 89.41..1/8 Last edited by limitedstreetoutlaw; 11-18-2009 at 04:24 PM.

06-30-2009, 12:18 PM	#132
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: How about some pics of High Performance haulers. Man that looks allot like mine did when I bought it from Tom. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-01-2009, 12:05 PM	#133
limitedstreetoutlaw Registered User Join Date: Jun 2009 Location: Arkoma OK Posts: 134	Re: How about some pics of High Performance haulers. yea i know i thought the sam thing after i saw those pic's on here _______________________________ 1968 c-10 stepside "THE GRAPE APE" all motor 1.56...60ft 7.41...1/8 89.41..1/8 Last edited by limitedstreetoutlaw; 11-18-2009 at 04:24 PM.

07-09-2009, 01:10 AM	#134
68 C-10 KID Mean Green Join Date: Sep 2007 Location: Portland, OR Posts: 522	Re: How about some pics of High Performance haulers. New tilt column, and the night I ran a 12.0 before I rolled the sprag and ruined the drum. Attached Images

07-09-2009, 02:23 AM	#135
joeys66pickup Dr. Frankenstein Join Date: Feb 2008 Location: beaverton,Or Posts: 458	Re: How about some pics of High Performance haulers. that is one damn clean engine bay for a truck that gets driven! i have seen your truck at the track, but i didnt know if it was you.. next time i will have to come up an say hi to a fellow young gun __________________ I Wanna Go Fast!!

07-09-2009, 07:18 AM	#136
68 C-10 KID Mean Green Join Date: Sep 2007 Location: Portland, OR Posts: 522	Re: How about some pics of High Performance haulers. always stop bye and shoot the ****. I should be racing at Woodburn July 25 and Aug 1st. Aug 1st is the thunder truck drags. thanks for the comments.

07-10-2009, 11:29 AM	#137
limitedstreetoutlaw Registered User Join Date: Jun 2009 Location: Arkoma OK Posts: 134	Re: How about some pics of High Performance haulers. nice truck 68 c-10 kid i like that color _______________________________ 1968 c-10 stepside "THE GRAPE APE" all motor 1.56...60ft 7.41...1/8 89.41..1/8 Last edited by limitedstreetoutlaw; 11-18-2009 at 04:25 PM.

07-11-2009, 01:13 AM	#139
limitedstreetoutlaw Registered User Join Date: Jun 2009 Location: Arkoma OK Posts: 134	Re: How about some pics of High Performance haulers. Thanks jgh64pkup _______________________________ 1968 c-10 stepside "THE GRAPE APE" all motor 1.56...60ft 7.41...1/8 89.41..1/8 Last edited by limitedstreetoutlaw; 11-18-2009 at 04:25 PM.

07-11-2009, 04:16 PM	#140
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: How about some pics of High Performance haulers. Hey guys, I thought I'd put some pics of mine in here. The pics of it with the snorkel hood are about 10 or so years old and it now has the cowl hood on it. I've had several motors in it and, right now, it has a pump gas 434 sbc in it. __________________ Chris 1966 Chevy C10 LWB, 434 sbc, TH350, 12-bolt, factory suspension, pump gas 7.02 @ 95.8, 1.45 60' 1965 Chevy C10 LWB, 355 sbc, TH350, daily driver Last edited by nxtruck; 07-11-2009 at 09:49 PM. Reason: photos didn't show up

07-11-2009, 04:27 PM	#141
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: How about some pics of High Performance haulers. If anyone knows how to line my pics up better, let me know. Sorry for the cluster____ I created with my pics. __________________ Chris 1966 Chevy C10 LWB, 434 sbc, TH350, 12-bolt, factory suspension, pump gas 7.02 @ 95.8, 1.45 60' 1965 Chevy C10 LWB, 355 sbc, TH350, daily driver

07-11-2009, 09:45 PM	#143
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: How about some pics of High Performance haulers. OK, thanks. I'm not the most computer-friendly individual, so I figured that I did good just getting the pics on here. As far as the low-mount alt. goes, yes, it fit without doing anything to the frame. __________________ Chris 1966 Chevy C10 LWB, 434 sbc, TH350, 12-bolt, factory suspension, pump gas 7.02 @ 95.8, 1.45 60' 1965 Chevy C10 LWB, 355 sbc, TH350, daily driver

07-11-2009, 09:58 PM	#144
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: How about some pics of High Performance haulers. cool is that a stardard size alt. __________________ Gage 1967 C10 Shortbed Stepside



Register or Log In To remove these advertisements.

07-12-2009, 08:42 AM	#145
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: How about some pics of High Performance haulers. Yes, it's a standard size alternator. __________________ Chris 1966 Chevy C10 LWB, 434 sbc, TH350, 12-bolt, factory suspension, pump gas 7.02 @ 95.8, 1.45 60' 1965 Chevy C10 LWB, 355 sbc, TH350, daily driver

07-14-2009, 11:35 AM	#146
limitedstreetoutlaw Registered User Join Date: Jun 2009 Location: Arkoma OK Posts: 134	Re: How about some pics of High Performance haulers. hey jgh64pkup the headers are Hooker Super comps 1 3/4 62-67 chevy2 nova _______________________________ 1968 c-10 stepside "THE GRAPE APE" all motor 1.56...60ft 7.41...1/8 89.41..1/8 Last edited by limitedstreetoutlaw; 11-18-2009 at 04:26 PM.

07-14-2009, 11:39 AM	#147
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: How about some pics of High Performance haulers. any issues with fitment __________________ Gage 1967 C10 Shortbed Stepside

07-14-2009, 12:06 PM	#148
limitedstreetoutlaw Registered User Join Date: Jun 2009 Location: Arkoma OK Posts: 134	Re: How about some pics of High Performance haulers. no issues gave me more ground clearance over my old truck headers guess i should say if your looking at the last side pic thats my old headers and exhaust setup they were small tube dynomax headers/w x pipe and flowmasters _______________________________ 1968 c-10 stepside "THE GRAPE APE" all motor 1.56...60ft 7.41...1/8 89.41..1/8 Last edited by limitedstreetoutlaw; 11-18-2009 at 04:26 PM.

07-18-2009, 06:40 PM	#149
paul1969 Registered User Join Date: Jul 2009 Location: spring,tx Posts: 17	Re: How about some pics of High Performance haulers. just wanted to say thanks for all the good pics through out the whole website u guys are awsome more pics soon to come. Last edited by paul1969; 07-19-2009 at 02:20 PM.

07-18-2009, 07:19 PM	#150
paul1969 Registered User Join Date: Jul 2009 Location: spring,tx Posts: 17	Re: How about some pics of High Performance haulers.

Register or Log In To remove these advertisements.