1950 Chevy 3600 - Bumper Punchin'

[72BlckButy]

Lovin' the pics Levi!

[IvelDesigns]

this weekend will be a dry run to see how the engine/trans fits in this thing. I know i could of gone with shorter valve covers, but like the look, and also want to leave room for future engine upgrades

i'll more than likely have to cut the firewall for them to fit.

Now if only the LMC, ***************** and Scotts Hotrods shipments would get here. Can't really do much with these parts for a while.

[GRIMSS]

I've been gone a while. Come back and see you've got a great project going. Looks great.

[IvelDesigns]

Originally Posted by GRIMSS

I've been gone a while. Come back and see you've got a great project going. Looks great.

thanks man. Are you planning to be at either of the events this year in MO? the camping thing is the weekend after memorial day, and the big show is in sept.

[GRIMSS]

Should be at the show in Sept. Well let me say I have to be at the show to see your's and nate's new toys. I'm going to try to get my panel there if I can.

[IvelDesigns]

right on. that panel looks badass. Are those 20" dodge steelies your filling in? i can't imagine how much time you have into those things.

[GRIMSS]

Originally Posted by IvelDesigns

right on. that panel looks badass. Are those 20" dodge steelies your filling in? i can't imagine how much time you have into those things.

I'm not sure on those yet.

[lolife99]

Levi,... what is the application for those BB headers? They look nice!

[IvelDesigns]

Originally Posted by lolife99

Levi,... what is the application for those BB headers? They look nice!

what do you mean by application?

I went back and forth between ordering ceramic coated or thermal coated, and finally settled on the thermal coated. It was litterally a coin flip to make the final call. I think the ceramic coated look better, but was having a hard time justifying $440 for a pair. The thermal coated were about $130 cheaper.

If i remember correctly, these headers are listed as chevelle headers.

Also, after bolting them onto the block last night, they are quite different from one side to the other. the P side is long, i assume to clear the starter, and the D side is short, dumping out just before the oil filter.

based on the first fit, it looks like they will leave plenty of room to change spark plugs, and just about all plugs could use straight boots. only cyl #1 will "need" a 90 boot. however, the msd wires i got all have 90 boots. :/

[Bob 68327]

He meant what car or truck were they made for . You sure do have a pile of shiney stuff there !! Bob

[lolife99]

[QUOTE=IvelDesigns;3208236]what do you mean by application?

I just meant,... what part # or what year car do they fit? 67-69 Camaro? Nova? Chevelle?
I guess the part number would be the best.
Thanks.

[IvelDesigns]

Originally Posted by lolife99

Levi,... what is the application for those BB headers? They look nice!

part # HED-68618
http://store.summitracing.com/partde...part=HED-68618

[IvelDesigns]

a couple boxes from LMC showed up today. can't wait to get home

[Dieselwrencher]

Dang LEVI! Did it feel like Christmas for levi? LOL Can't wait to see how it all looks in the truck. I am guessing the engine will set in the frame higher than most trucks of this era with BB's in them due to the bumper punchin goal? I know I wouldn't want my expensive headers draggin the pavement. LOL

[tcb-1]

lovin' the updates! keep them coming, Levi!

[IvelDesigns]

So i made a mistake tonight...

I made a list of everything that has to be done yet. Then the mistake was thinking about the $$ it's still gonna take to get those things done.

If i don't make my goal of memorial day weekend, it will be due to budget, not effort.

And on the effort note, i got the front frame all boxed in. Just need to grind it down. We got the front and rear glass out, and i started in on one of the patches for the floor.

Tomorrow is going to be a busy day...

[shawn57nomad]

WOWZERS! Super shiny...I think I need my shades! Way cool Levi...Way COOL!!!! Great progress on the Fitty. Can't wait to see it in person. Bob said you are gonna keep the patina? Couldn't ask for a better scheme: Straight, Low, kinda rusty, and then you lift the lid on the jewelry box and...BAM!...shiny goodness with all the decibels and CuIn your heart desires! Ha! Gonna stop now startin' to sound a little like Grandma's dirty novel that fell off the shelf, in a good way though. Looks Great! Keep it up.

[lurch115]

nice pile of shiney stuff, suprized the wife didn't chew ya out for having them out in the house...hey i see you got a comp cams timing set....hope not the gear drive... looking good though, keep it up

[IvelDesigns]

Originally Posted by shawn57nomad

Couldn't ask for a better scheme: Straight, Low, kinda rusty, and then you lift the lid on the jewelry box and...BAM!...shiny goodness with all the decibels and CuIn your heart desires!

hey shawn, yeah, that's the exact look i'm going for.

One thing i'm considering now is to run blackwall wheels instead of wide whites. We'll see how things progress though.

Originally Posted by lurch115

nice pile of shiney stuff, suprized the wife didn't chew ya out for having them out in the house...hey i see you got a comp cams timing set....hope not the gear drive... looking good though, keep it up

yeah, she let me have my fun for a while. Everything is boxed up again and in the storage room now, so it's out of sight. Yeah, it's a double chain set, not a gear drive. It'll be hard enough to keep thing thing soundin' like a sleeper with the planned exhaust. figured i didn't need the gear drive whinnin' too.

Originally Posted by Dieselwrencher

Dang LEVI! Did it feel like Christmas for levi? LOL Can't wait to see how it all looks in the truck. I am guessing the engine will set in the frame higher than most trucks of this era with BB's in them due to the bumper punchin goal? I know I wouldn't want my expensive headers draggin the pavement. LOL

absolutely! yeah, we'll see how high up they sit today. everything needs to be higher than the bottom of the frame, but i think it should be fairly reasonable.

Originally Posted by tcb-1

lovin' the updates! keep them coming, Levi!

thanks man!

[IvelDesigns]

i also wanted to say that i delt with a new vendor this week for some parts that my usual place was out of. Mark @ http://www.stylinsolutions.com/ came to the rescue when i needed my SMC valves and 10 switch box. I will say i was a little nervous ordering from them due to a past experience i had with another "google searched" vendor, but these guys rocked. I talked to Mark to confirm the stuff i needed was in stock, and get an idea of how they work. I placed the order on tuesday, had the parts on friday.

I will say there was a quirk with their website within FireFox, but IE was fine and got my order in right away. Prices were also cheaper than my normal place for air stuff.

So again, don't hesitate to order parts from Mark @ http://www.stylinsolutions.com/ make sure to tell them to "send levi some swag!"

[LockDoc]

-
Looks like you are making some good progress. I don't get over to this forum so I haven't seen the progress you have made. I used to follow some of the builds before they split them into their own forum. I guess I need to get around more...

LockDoc

[IvelDesigns]

Originally Posted by LockDoc

-
Looks like you are making some good progress. I don't get over to this forum so I haven't seen the progress you have made. I used to follow some of the builds before they split them into their own forum. I guess I need to get around more...

LockDoc

Thx Leon. You'll have to swing over some time and check it out.

[IvelDesigns]

Here are the pics. I'll add comments shortly.

I started in on the floor work this weekend. Spent saturday morning making a patch for the drivers side floor. Turned out pretty well (i'm missing the shots of it done. i'll get them later) if i do say so myself. I'm not worry about the looks. Just want to keep my feet dry.






Friday night we got the front and rear glass out. Then on Saturday, after searching all over Des Moines for the right sized clutch drive for two hours, we finally found one at Napa. Yeah, the one we drove by and I said "hey, we should stop there first". That's right Matt. I'm calling you out on that one We did end up getting all of the glass out of the cab though. Unfortunately, it doesn't look like i will be able to get the door glass trim off the glass due to rusted and stripped tiny ass screws. So may need to give LMC a call for those. I may look at drilling them out and just welding them back together. not sure yet.


Ok, so Saturday was the big day for engine trial fitment. Overall, very anti-climatic. headers looked to be a concern at first, but once we got it slid back, all was good. These two pics show the engine about where it will end up. in these shots it's about 2" forward of where it will end up. my motor mounts from Scotts didn't get here in time, but it does seem to be sitting awful high. but at this height, we have good oil pan and trans clearance at the sacrifice of the floor. Fortunately it won't be anything to crazy and will still allow for the factory bench seat.




So, with the test fit done, we started in on the trans X member. My goal was to have it mount 1" above the frame. I have an energy suspension trans mount that i plan to use, so we did some measuring and start in on the fab work. the tube is 1/4", and should make for a pretty beefy X member. because i'm not 100% on where the final mounting location will be, i made the plate on the bottom long (that will bolt to the bottom of the frame rail) and will shim the side plates with 1/8" or 1/4" steel if needed. But, for now, the X member is pretty much out of the way. Just need to do some more welding and grinding.

[IvelDesigns]

Some of you may be saying "Why Levi? I thought you already painted your engine?!" And my response would be I did. But i made a mistake...

The ... at the end of that sentence could be enough of an explanation, but to relieve the few currently "in the know" from holding it over me, I made the mistake of quickly grabbing two orange cans of paint off the shelf at the local AutoZone without looking to see what orange it really was. Well, thanks to my good ol' buddy ol' pal Matt, he informed me the day after i painted the engine that the color looked "funny" and then pointed out that the receipt said "hemi orange". So for the last week i've gotten calls from various friends and family asking about my "Chevy Hemi"

I was going to leave it. But, as usual, Matt was right and it was a better idea to wire it down and paint it again. So, we did.


And then after a few beers, we decided to get the shinny parts out and "test fit" them.


And here's the dreaded list. Blue dots == things that can be done now. everything else is waiting on something else. $ signs are things i have yet to order. It's kinda depressing when i add those things up. Now i see why most people spend a year or more building their rides.

[andrewt2]

theres a lot of expensive items still left on that list.... better talk the wife into getting a second part time job good to see you're doing your part to boost this economy levi!