The Burb a long time coming - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Burb · 01-07-2021, 06:11 PM

Well, first set were SS6 Slam bags but I wanted more height and switch to D2600 Dominators got me closer to ride height now I need to channel the rear a little more and raise the inner fender wells

**kev2809** · 01-07-2021, 08:40 PM

i have the dominator 2500s up front because my cupped arms are 8 1/4" pipe. i had 2600s up front but it seems super close to touching when aired out. im tearing everything apart to paint the front clip and im thinking of trying to put some 2600s back in there after grinding the cup edge down (something i should of done the first time).

was hoping those you pulled out were ss7's, those seem to be nice bags and dont balloon out.

Burb · 01-20-2021, 11:09 AM

Ya, I need to get a lift on order so I can pull the body back off and do a little work on the rear of the chassis for a more level aired out, probably cut on the frame a bit

LT7A · 05-24-2021, 07:04 AM

Wow, this is a high intensity build. I'm sorry to see that covid got in the way of your plans. Have you been able to move any of it forward since your last post?

Burb · 05-27-2021, 12:11 PM

Some ... tore a wall out in the garage for little more room.

Burb · 05-27-2021, 12:15 PM

And then I went ahead and pulled the motor and transmission

Burb · 05-27-2021, 12:20 PM

cleaned up the dog house a little ... want to do some more work on the new steering column setting for the rack, changing the firewall mount

**kev2809** · 06-05-2021, 08:30 AM

good progress!

boy do I miss working in my garage......

**kev2809** · 11-21-2021, 01:08 PM

any updates on this?

01-07-2021, 06:11 PM	#1
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Well, first set were SS6 Slam bags but I wanted more height and switch to D2600 Dominators got me closer to ride height now I need to channel the rear a little more and raise the inner fender wells __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

01-07-2021, 08:40 PM	#2
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: The Burb a long time coming i have the dominator 2500s up front because my cupped arms are 8 1/4" pipe. i had 2600s up front but it seems super close to touching when aired out. im tearing everything apart to paint the front clip and im thinking of trying to put some 2600s back in there after grinding the cup edge down (something i should of done the first time). was hoping those you pulled out were ss7's, those seem to be nice bags and dont balloon out. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-20-2021, 11:09 AM	#3
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Ya, I need to get a lift on order so I can pull the body back off and do a little work on the rear of the chassis for a more level aired out, probably cut on the frame a bit Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

05-24-2021, 07:04 AM	#4
LT7A Registered User Join Date: Oct 2015 Location: PNW Posts: 3,615	Re: The Burb a long time coming Wow, this is a high intensity build. I'm sorry to see that covid got in the way of your plans. Have you been able to move any of it forward since your last post?

05-27-2021, 12:11 PM	#5
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming Some ... tore a wall out in the garage for little more room. Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be Last edited by Burb; 05-27-2021 at 12:31 PM.

05-27-2021, 12:15 PM	#6
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming And then I went ahead and pulled the motor and transmission Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

05-27-2021, 12:20 PM	#7
Burb Coordinator of Synchronicity Join Date: Dec 2005 Location: West of Houston, TX Posts: 437	Re: The Burb a long time coming cleaned up the dog house a little ... want to do some more work on the new steering column setting for the rack, changing the firewall mount Attached Images __________________ Rick 1971 Suburban ... W.I.P. *Build Thread* Customization is ones personal touch-- not what other people think it should be

06-05-2021, 08:30 AM	#8
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: The Burb a long time coming good progress! boy do I miss working in my garage...... __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-21-2021, 01:08 PM	#9
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: The Burb a long time coming any updates on this? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.