The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board > projects and builds 88-98

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-05-2015, 03:01 AM   #126
likaroc13
Rollin' Old Skool
 
Join Date: Jun 2007
Location: Hattiesburg, MS
Posts: 5,371
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Quote:
Originally Posted by Hankster View Post
Don't feel bad, I traded my rallys for some 20s and went to put them on and they wouldn't fit. So I tried some slip on spacers, still to small, I wound up having to get atleast 1/2 inch spacer but went 1.5 inches anyways.. lol
That sucks. Hopefully I can get my issues sorted out soon.

Quote:
Originally Posted by dragginmetal View Post
I've heard several people complain about Boss and the dust caps. Wonder why they made them fit the small rotors when almost all have the bigger rotors. Somebody wasent thinking that day at the factory. The p/o I got mine from had the same problem. Luckly (I guess)(big rim, small breaks. sure sounds safe. lol) I have the small rotors and rims fit good.
I remember reading about the issues a good while back, but I never knew my wheels were the earlier version since I didn't buy them. If not for asking the PO, I still wouldn't have known. From what I understand, the problem has been corrected on the newer version BOSS wheels. And yeah, I'd say somebody at the factory wasn't thinking.
__________________
_____________________________________________
Phillip

My Build threads:
1966 Chevy C-10 "Black Betty"

shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction)
http://67-72chevytrucks.com/vboard/s...ighlight=betty

1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver)
http://67-72chevytrucks.com/vboard/s...d.php?t=601142

Pics:
'66 C-10 https://flic.kr/s/aHsjHWD4h9
'97 Tahoe https://flic.kr/s/aHsjGZ7wKP
'93 C-1500 https://flic.kr/s/aHskxdpdnQ
'88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md

Previous Rides:
1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold)
1993 Chevy C-1500 short/step Retro-Rod (Sold)
1988 S-10 Blazer 2dr/2wd mild custom (Sold)
likaroc13 is offline   Reply With Quote
Old 03-19-2015, 03:57 PM   #127
likaroc13
Rollin' Old Skool
 
Join Date: Jun 2007
Location: Hattiesburg, MS
Posts: 5,371
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Well, I got my wheel issue sorted out earlier this week. I drove down to dad's place Monday since the weather was nice. We yanked the wheels & did some light grinding in the problem areas. Then we painted the parts & reinstalled the wheel before a test drive. The fresh paint allowed us to see exactly where it was rubbing each time. It took a little trial & error on both sides until we got it right. But we got it! So, no need for spacers anymore. I went back to check & noticed that I used 4.5" backspacing on the front wheels, per suggestion of an unnamed reputable truck source of another forum. While they did work with a little trimming, I guess a bit less backspacing would've yielded less headache.


I also received the correct bullet center caps for my smoothie wheels. Once I get a chance to clean up my wheels/tires & install dust caps for my hubs, I'll get them on & snap some pics.


Bad news is that the dang chirping has yet again returned with a vengeance.
__________________
_____________________________________________
Phillip

My Build threads:
1966 Chevy C-10 "Black Betty"

shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction)
http://67-72chevytrucks.com/vboard/s...ighlight=betty

1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver)
http://67-72chevytrucks.com/vboard/s...d.php?t=601142

Pics:
'66 C-10 https://flic.kr/s/aHsjHWD4h9
'97 Tahoe https://flic.kr/s/aHsjGZ7wKP
'93 C-1500 https://flic.kr/s/aHskxdpdnQ
'88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md

Previous Rides:
1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold)
1993 Chevy C-1500 short/step Retro-Rod (Sold)
1988 S-10 Blazer 2dr/2wd mild custom (Sold)
likaroc13 is offline   Reply With Quote
Old 03-25-2015, 09:24 PM   #128
Hankster
Registered User
 
Hankster's Avatar
 
Join Date: Jan 2013
Location: Nacogdoches, Texas
Posts: 895
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Quote:
Originally Posted by likaroc13 View Post
Well, I got my wheel issue sorted out earlier this week. I drove down to dad's place Monday since the weather was nice. We yanked the wheels & did some light grinding in the problem areas. Then we painted the parts & reinstalled the wheel before a test drive. The fresh paint allowed us to see exactly where it was rubbing each time. It took a little trial & error on both sides until we got it right. But we got it! So, no need for spacers anymore. I went back to check & noticed that I used 4.5" backspacing on the front wheels, per suggestion of an unnamed reputable truck source of another forum. While they did work with a little trimming, I guess a bit less backspacing would've yielded less headache.
At least you didn't have to buy spacers!

Quote:
Originally Posted by likaroc13 View Post
I also received the correct bullet center caps for my smoothie wheels. Once I get a chance to clean up my wheels/tires & install dust caps for my hubs, I'll get them on & snap some pics.
Can't wait to see the smoothies on!


Quote:
Originally Posted by likaroc13 View Post
Bad news is that the dang chirping has yet again returned with a vengeance.
That sucks, hope you get it figured out soon!
__________________
Current Build
89 s10 ecsb 2wd 4.3/700r4 50k OG Miles
Instagram- shaggin_s10

'86 Chevrolet C10 Custom Deluxe - Gen V 454 - 4l80e - welded 12 bolt
(Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611611 ) SOLD
Hankster is offline   Reply With Quote
Old 03-25-2015, 09:59 PM   #129
likaroc13
Rollin' Old Skool
 
Join Date: Jun 2007
Location: Hattiesburg, MS
Posts: 5,371
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Quote:
Originally Posted by Hankster View Post
At least you didn't have to buy spacers!

Can't wait to see the smoothies on!


That sucks, hope you get it figured out soon!
Glad I didn't have to use spacers as well! The smoothies have been on for probably a month now. They're not too impressive without the centers though.

As for the chirping, gonna check with some shops to see if anybody has a tool for measuring pulley alignment before I replace anything else. I already mentioned before, but it's so annoying to drive around with it making noise like that.

Also, gotta give a shout out to YBNORML (aka Jason) for hooking me up with a set of dust caps.
__________________
_____________________________________________
Phillip

My Build threads:
1966 Chevy C-10 "Black Betty"

shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction)
http://67-72chevytrucks.com/vboard/s...ighlight=betty

1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver)
http://67-72chevytrucks.com/vboard/s...d.php?t=601142

Pics:
'66 C-10 https://flic.kr/s/aHsjHWD4h9
'97 Tahoe https://flic.kr/s/aHsjGZ7wKP
'93 C-1500 https://flic.kr/s/aHskxdpdnQ
'88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md

Previous Rides:
1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold)
1993 Chevy C-1500 short/step Retro-Rod (Sold)
1988 S-10 Blazer 2dr/2wd mild custom (Sold)
likaroc13 is offline   Reply With Quote
Old 03-26-2015, 09:18 AM   #130
Justin@EntropyRad
Registered User
 
Justin@EntropyRad's Avatar
 
Join Date: Jan 2015
Location: Charlotte, NC
Posts: 483
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

2dr Tahoes/Blazers are such unicorns...always fun to see one
__________________
* Call me NOT the website number*
Justin Novick
(773) 303-8251
Sales/Support
Entropy Radiator / Engineered Cooling Products
"The Sexiest Radiators For The Sexiest Hot Rods" - www.EntropyRad.com www.speedcooling.com
Justin@EntropyRad is offline   Reply With Quote
Old 03-26-2015, 01:36 PM   #131
Hankster
Registered User
 
Hankster's Avatar
 
Join Date: Jan 2013
Location: Nacogdoches, Texas
Posts: 895
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Quote:
Originally Posted by likaroc13 View Post
Glad I didn't have to use spacers as well! The smoothies have been on for probably a month now. They're not too impressive without the centers though.

As for the chirping, gonna check with some shops to see if anybody has a tool for measuring pulley alignment before I replace anything else. I already mentioned before, but it's so annoying to drive around with it making noise like that.

Also, gotta give a shout out to YBNORML (aka Jason) for hooking me up with a set of dust caps.
Yeah the noise is pretty annoying. Also, they may have already been on, But I haven't seen them on.. lol
__________________
Current Build
89 s10 ecsb 2wd 4.3/700r4 50k OG Miles
Instagram- shaggin_s10

'86 Chevrolet C10 Custom Deluxe - Gen V 454 - 4l80e - welded 12 bolt
(Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611611 ) SOLD
Hankster is offline   Reply With Quote
Old 03-26-2015, 05:16 PM   #132
likaroc13
Rollin' Old Skool
 
Join Date: Jun 2007
Location: Hattiesburg, MS
Posts: 5,371
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Quote:
Originally Posted by Justin@EntropyRad View Post
2dr Tahoes/Blazers are such unicorns...always fun to see one
Yep, don't see too many around. I like being unique.

Quote:
Originally Posted by Hankster View Post
Yeah the noise is pretty annoying. Also, they may have already been on, But I haven't seen them on.. lol
I'll try to remember to snap a pic without center caps, just to compare. Once the caps are on, then I have to determine whether I want to run the trim rings or not.
__________________
_____________________________________________
Phillip

My Build threads:
1966 Chevy C-10 "Black Betty"

shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction)
http://67-72chevytrucks.com/vboard/s...ighlight=betty

1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver)
http://67-72chevytrucks.com/vboard/s...d.php?t=601142

Pics:
'66 C-10 https://flic.kr/s/aHsjHWD4h9
'97 Tahoe https://flic.kr/s/aHsjGZ7wKP
'93 C-1500 https://flic.kr/s/aHskxdpdnQ
'88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md

Previous Rides:
1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold)
1993 Chevy C-1500 short/step Retro-Rod (Sold)
1988 S-10 Blazer 2dr/2wd mild custom (Sold)
likaroc13 is offline   Reply With Quote
Old 03-26-2015, 06:26 PM   #133
Hankster
Registered User
 
Hankster's Avatar
 
Join Date: Jan 2013
Location: Nacogdoches, Texas
Posts: 895
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

I don't think I would run trim rings, thats just me though.
__________________
Current Build
89 s10 ecsb 2wd 4.3/700r4 50k OG Miles
Instagram- shaggin_s10

'86 Chevrolet C10 Custom Deluxe - Gen V 454 - 4l80e - welded 12 bolt
(Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611611 ) SOLD
Hankster is offline   Reply With Quote
Old 04-29-2015, 12:07 PM   #134
likaroc13
Rollin' Old Skool
 
Join Date: Jun 2007
Location: Hattiesburg, MS
Posts: 5,371
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Had a little snafu with the dust caps not fitting, & I just figured out why last week. Turns out the outer lip of the front hubs was machined down on a brake lathe in order to allow the center caps from the 18" Boss wheels to fit. As a result, the hub is now too short for the dust caps to fit. So, we've decided to just try & take two pair of dust caps to make a couple that will fit. The only other option would be to replace rotors, which I don't want to do until it's time for a brake system overhaul.

I'm also happy to say that last week we finally fixed the chirping issue. It feels so good to have that annoying sound gone. It had gotten so bad that I hated to even drive to town. A few weeks ago I went by a local custom shop in Spring Hill, & the guys there looked it over for a while. The only conclusion they could come to was that it might be the water pump itself. So, I gathered up a bunch of parts in preparation of a cooling system overhaul. I ended up going with the AC Delco OE style pump, which is pricey. However, they're supposed to be better quality. I also bought new Gates upper & lower radiator hoses, along with the small heater & bypass hoses that attach to the water pump. Since they were originals, I went ahead & replaced them all. I also bought a new Delco 195* thermostat & genuine GM serpentine belt just for the heck of it. Before installation, I bought some VHT satin black engine enamel & painted the pump. My dad's friend Mark did the work for me at a great deal. For what a local shop in Spring Hill was going to charge, it was a no-brainer to let him tackle it instead. I needed to make a trip down to MS anyway to help dad do some stuff at my grandparents' place, so it worked out good.

Here are the part #'s I used:

water pump~ ACDelco #251-719
bypass hose from w/p to t-stat housing~ Gates #19025
small hose from w/p to heater hose~ Gates #28466
thermostat~ ACDelco #131-151
thermostat gasket~ Fel-pro #35710
upper radiator hose~ Gates #22209
lower radiator hose~ Gates #21941
serpentine belt~ GM #19244955
__________________
_____________________________________________
Phillip

My Build threads:
1966 Chevy C-10 "Black Betty"

shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction)
http://67-72chevytrucks.com/vboard/s...ighlight=betty

1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver)
http://67-72chevytrucks.com/vboard/s...d.php?t=601142

Pics:
'66 C-10 https://flic.kr/s/aHsjHWD4h9
'97 Tahoe https://flic.kr/s/aHsjGZ7wKP
'93 C-1500 https://flic.kr/s/aHskxdpdnQ
'88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md

Previous Rides:
1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold)
1993 Chevy C-1500 short/step Retro-Rod (Sold)
1988 S-10 Blazer 2dr/2wd mild custom (Sold)
likaroc13 is offline   Reply With Quote
Old 04-30-2015, 06:08 PM   #135
Hankster
Registered User
 
Hankster's Avatar
 
Join Date: Jan 2013
Location: Nacogdoches, Texas
Posts: 895
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Glad you got it all figured out and the chirping noise gone!
__________________
Current Build
89 s10 ecsb 2wd 4.3/700r4 50k OG Miles
Instagram- shaggin_s10

'86 Chevrolet C10 Custom Deluxe - Gen V 454 - 4l80e - welded 12 bolt
(Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611611 ) SOLD
Hankster is offline   Reply With Quote
Old 05-04-2015, 02:08 AM   #136
tommys72
Registered User
 
tommys72's Avatar
 
Join Date: Jun 2012
Location: springfield mo
Posts: 3,075
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Good looking Tahoe
__________________
United States Marine Corps 2000-2011
Iraq and Afghanistan veteran
Just living life now and enjoying it and my wife, daughter and son


tommys72 is offline   Reply With Quote
Old 05-04-2015, 09:32 AM   #137
likaroc13
Rollin' Old Skool
 
Join Date: Jun 2007
Location: Hattiesburg, MS
Posts: 5,371
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Quote:
Originally Posted by tommys72 View Post
Good looking Tahoe
Thanks.
__________________
_____________________________________________
Phillip

My Build threads:
1966 Chevy C-10 "Black Betty"

shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction)
http://67-72chevytrucks.com/vboard/s...ighlight=betty

1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver)
http://67-72chevytrucks.com/vboard/s...d.php?t=601142

Pics:
'66 C-10 https://flic.kr/s/aHsjHWD4h9
'97 Tahoe https://flic.kr/s/aHsjGZ7wKP
'93 C-1500 https://flic.kr/s/aHskxdpdnQ
'88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md

Previous Rides:
1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold)
1993 Chevy C-1500 short/step Retro-Rod (Sold)
1988 S-10 Blazer 2dr/2wd mild custom (Sold)
likaroc13 is offline   Reply With Quote
Old 05-13-2015, 10:41 PM   #138
likaroc13
Rollin' Old Skool
 
Join Date: Jun 2007
Location: Hattiesburg, MS
Posts: 5,371
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Sadly, the drama continues. My dad had the dust caps lengthened. However, they still won't fit. Why, you ask? Because the amount of metal on the hub/rotor that was machined down, is the amount that was needed for the caps to slip into. Without that metal there, the caps hit the bearings when trying to tap them into place. So now my only option is to get another pair of rotors.
__________________
_____________________________________________
Phillip

My Build threads:
1966 Chevy C-10 "Black Betty"

shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction)
http://67-72chevytrucks.com/vboard/s...ighlight=betty

1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver)
http://67-72chevytrucks.com/vboard/s...d.php?t=601142

Pics:
'66 C-10 https://flic.kr/s/aHsjHWD4h9
'97 Tahoe https://flic.kr/s/aHsjGZ7wKP
'93 C-1500 https://flic.kr/s/aHskxdpdnQ
'88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md

Previous Rides:
1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold)
1993 Chevy C-1500 short/step Retro-Rod (Sold)
1988 S-10 Blazer 2dr/2wd mild custom (Sold)
likaroc13 is offline   Reply With Quote
Old 05-31-2015, 12:40 AM   #139
likaroc13
Rollin' Old Skool
 
Join Date: Jun 2007
Location: Hattiesburg, MS
Posts: 5,371
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

No updates on the rotor situation yet, but I decided to snap a couple pics this evening. These are the first pics since installing the steel smoothie wheels & new tires. Nothing is clean in the pics, & they were taken not long before dark. So, it's not the most accurate representation. I'll get some better ones when I get the rotor/dust cap situation fixed & finally install the bullet center caps.





__________________
_____________________________________________
Phillip

My Build threads:
1966 Chevy C-10 "Black Betty"

shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction)
http://67-72chevytrucks.com/vboard/s...ighlight=betty

1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver)
http://67-72chevytrucks.com/vboard/s...d.php?t=601142

Pics:
'66 C-10 https://flic.kr/s/aHsjHWD4h9
'97 Tahoe https://flic.kr/s/aHsjGZ7wKP
'93 C-1500 https://flic.kr/s/aHskxdpdnQ
'88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md

Previous Rides:
1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold)
1993 Chevy C-1500 short/step Retro-Rod (Sold)
1988 S-10 Blazer 2dr/2wd mild custom (Sold)
likaroc13 is offline   Reply With Quote
Old 05-31-2015, 08:53 AM   #140
Cashed
Registered User
 
Cashed's Avatar
 
Join Date: Feb 2009
Location: Springtown, TX
Posts: 161
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

That looks sweet!
__________________
70 SWB - 514 Red Patina, Ridetech airride, LSx/T56, gray 20" Coy C44’s
77 2wd Blazer - Red Patina and OG graphics, 350/400, Lowered, 20” USMags
98 2door 2wd Tahoe - 3/4 drop, 20" Coy C57's, ProPerformance Revelator big brake kit, Don Hardy 416 LSx/4l80e

IG: @chdcsh
Cashed is offline   Reply With Quote
Old 05-31-2015, 11:06 PM   #141
likaroc13
Rollin' Old Skool
 
Join Date: Jun 2007
Location: Hattiesburg, MS
Posts: 5,371
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Quote:
Originally Posted by Cashed View Post
That looks sweet!
Thanks man. It should look much better with the center caps. Rolling kinda Plain-Jane right now.
__________________
_____________________________________________
Phillip

My Build threads:
1966 Chevy C-10 "Black Betty"

shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction)
http://67-72chevytrucks.com/vboard/s...ighlight=betty

1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver)
http://67-72chevytrucks.com/vboard/s...d.php?t=601142

Pics:
'66 C-10 https://flic.kr/s/aHsjHWD4h9
'97 Tahoe https://flic.kr/s/aHsjGZ7wKP
'93 C-1500 https://flic.kr/s/aHskxdpdnQ
'88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md

Previous Rides:
1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold)
1993 Chevy C-1500 short/step Retro-Rod (Sold)
1988 S-10 Blazer 2dr/2wd mild custom (Sold)
likaroc13 is offline   Reply With Quote
Old 08-14-2015, 05:26 PM   #142
likaroc13
Rollin' Old Skool
 
Join Date: Jun 2007
Location: Hattiesburg, MS
Posts: 5,371
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Been gathering parts for a brake system overhaul, which I will elaborate more about once the time comes. I'm still having some vibration issues around 55-60 mph & above, which I think is wheel related. I took it to Discount Tire a while back for rebalancing, thinking it was the problem. The guy did mention then that he thought I had a bent wheel, but everything balanced out okay. The vibration is still there though & quite annoying. I'm taking it back to determine for sure what's going on & where, & I'll just have to proceed with whatever is necessary to fix it.

On a positive note, I just took some parts to the painter. I pulled the crappy LED strip light from my roll pan & will be replacing with something better. While it was off, I decided it would get new paint. I also pulled the mirrors for repaint, since they weren't done to my satisfaction the first time. The grille will also finally be coming together, as it went off for paint as well. After driving it looking like a hooptie for close to a year now (if not already), I'm excited to get this thing back together!
__________________
_____________________________________________
Phillip

My Build threads:
1966 Chevy C-10 "Black Betty"

shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction)
http://67-72chevytrucks.com/vboard/s...ighlight=betty

1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver)
http://67-72chevytrucks.com/vboard/s...d.php?t=601142

Pics:
'66 C-10 https://flic.kr/s/aHsjHWD4h9
'97 Tahoe https://flic.kr/s/aHsjGZ7wKP
'93 C-1500 https://flic.kr/s/aHskxdpdnQ
'88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md

Previous Rides:
1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold)
1993 Chevy C-1500 short/step Retro-Rod (Sold)
1988 S-10 Blazer 2dr/2wd mild custom (Sold)
likaroc13 is offline   Reply With Quote
Old 08-19-2015, 12:14 PM   #143
killthewabbit
Spear and magic helmet!
 
killthewabbit's Avatar
 
Join Date: Oct 2006
Location: Nashville, TN
Posts: 1,226
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Good deal. Should be pretty awesome when you get it all done
killthewabbit is offline   Reply With Quote
Old 08-19-2015, 05:44 PM   #144
likaroc13
Rollin' Old Skool
 
Join Date: Jun 2007
Location: Hattiesburg, MS
Posts: 5,371
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Quote:
Originally Posted by killthewabbit View Post
Good deal. Should be pretty awesome when you get it all done
I hope so! Been working on the rear frame rail/hitch area while the roll pan is off. Trying to clean up some surface rust & prep for repainting. Not sure if I want to spray bomb it or splurge on POR-15.


Dropped it off at Discount Tire on Saturday. They said the wheels/tires were slightly out of balance, but my passenger rear wheel is bent. My guess is that's definitely where the vibration is coming from. I need to get it up to highway speeds to see how it responds after the re-balancing. My guess is that'll I'll be ordering a new wheel though.
__________________
_____________________________________________
Phillip

My Build threads:
1966 Chevy C-10 "Black Betty"

shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction)
http://67-72chevytrucks.com/vboard/s...ighlight=betty

1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver)
http://67-72chevytrucks.com/vboard/s...d.php?t=601142

Pics:
'66 C-10 https://flic.kr/s/aHsjHWD4h9
'97 Tahoe https://flic.kr/s/aHsjGZ7wKP
'93 C-1500 https://flic.kr/s/aHskxdpdnQ
'88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md

Previous Rides:
1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold)
1993 Chevy C-1500 short/step Retro-Rod (Sold)
1988 S-10 Blazer 2dr/2wd mild custom (Sold)
likaroc13 is offline   Reply With Quote
Old 08-25-2015, 06:59 PM   #145
likaroc13
Rollin' Old Skool
 
Join Date: Jun 2007
Location: Hattiesburg, MS
Posts: 5,371
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Got it out on the highway last night, & the vibration is definitely still there. It didn't seem quite as bad as before, but I guess that's partially due to the balance previously being off a little. I went ahead & ordered a new wheel today. Now I have to wait for it to be custom built. That's almost $100 I wasn't expecting to spend!


I've also decided to ditch the plan to replace my tailgate light bar/strip, while keeping the tinted tails. I just didn't trust the fact that most of them are hit/miss on quality. I got a crappy one last time, & I don't want to get stuck with another. So I plan to order a new set of taillights & have them painted in this fashion:

taillights 1 by likaroc13, on Flickr

taillights 2 by likaroc13, on Flickr
__________________
_____________________________________________
Phillip

My Build threads:
1966 Chevy C-10 "Black Betty"

shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction)
http://67-72chevytrucks.com/vboard/s...ighlight=betty

1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver)
http://67-72chevytrucks.com/vboard/s...d.php?t=601142

Pics:
'66 C-10 https://flic.kr/s/aHsjHWD4h9
'97 Tahoe https://flic.kr/s/aHsjGZ7wKP
'93 C-1500 https://flic.kr/s/aHskxdpdnQ
'88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md

Previous Rides:
1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold)
1993 Chevy C-1500 short/step Retro-Rod (Sold)
1988 S-10 Blazer 2dr/2wd mild custom (Sold)
likaroc13 is offline   Reply With Quote
Old 09-21-2015, 09:50 PM   #146
DroppedAsAChild
Registered User
 
DroppedAsAChild's Avatar
 
Join Date: Nov 2009
Location: Ontario, Canada
Posts: 130
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Trucks looking good brother.
__________________
1999 OBS Gmc Sierra ECSB Classic 1500 2wd-The Show truck
(Black/Greystone metallic 2 tone)

1999 OBS GMC Yukon 4dr 2wd-Daily Driver/Toy (White)
1990 OBS GMC Sierra ST RCSS 2wd-100% Factory Original
(Crimson Red/Metallic Silver 2 tone)

1997 OBS Chevrolet Silverado ECSB 2wd-Pops Daily/Tow Pig (White)
DroppedAsAChild is offline   Reply With Quote
Old 09-25-2015, 12:14 AM   #147
likaroc13
Rollin' Old Skool
 
Join Date: Jun 2007
Location: Hattiesburg, MS
Posts: 5,371
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Quote:
Originally Posted by DroppedAsAChild View Post
Trucks looking good brother.
Thank you sir!

Just got back into town after being gone to MS for the past week. My grandfather passed away unexpectedly, so we've been trying to get things situated. Just before I left town, my new Wheel Vintiques wheel showed up. I need to see about having it powder coated to match my others & then get it mounted up. I also got word from the painter today that my parts are ready, so I plan to pick them up this weekend. Once I have a chance to get things reassembled, I'll be sure to post some new pics.
__________________
_____________________________________________
Phillip

My Build threads:
1966 Chevy C-10 "Black Betty"

shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction)
http://67-72chevytrucks.com/vboard/s...ighlight=betty

1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver)
http://67-72chevytrucks.com/vboard/s...d.php?t=601142

Pics:
'66 C-10 https://flic.kr/s/aHsjHWD4h9
'97 Tahoe https://flic.kr/s/aHsjGZ7wKP
'93 C-1500 https://flic.kr/s/aHskxdpdnQ
'88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md

Previous Rides:
1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold)
1993 Chevy C-1500 short/step Retro-Rod (Sold)
1988 S-10 Blazer 2dr/2wd mild custom (Sold)
likaroc13 is offline   Reply With Quote
Old 10-11-2015, 11:57 PM   #148
likaroc13
Rollin' Old Skool
 
Join Date: Jun 2007
Location: Hattiesburg, MS
Posts: 5,371
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Got some parts back from paint. While most look pretty good, the grille just isn't up to my standards. He even redid it free of charge, & it still didn't come out right. I also noticed that he failed to prep/fix some of the minor imperfections before painting, thus they're still noticeable. As most who have a vehicle with one know, black paint jobs are unforgiving. This guy isn't the one who was supposed to be painting my parts, however it is his full-time profession. The guy I wanted to do them has been tied up with bigger projects, thus he passed me on to his friend. If I had known it would go down like it has, I would've just waited for another painter.


On another note, I went to Discount Tire this past week to have my new wheel checked. Since I needed to get it powder coated before installing, I just wanted to make sure I didn't run into another bent/warped wheel issue. Sadly, as soon as the wheel was put on the machine & spun, it was obvious that it also had a slight wobble. So, I got in touch with Summit Racing when I got back home. They're known for great customer service & have always been good to me, & the guy I spoke to assured me that he'd take care of me. So, hopefully we can get it all straightened out eventually. It just sucks to wait 4-6 weeks for a wheel to be built to spec, & then it doesn't even run true. I'm just glad I definitely had it checked before powder coat.


Lastly, I've also been checking about having the metal fuel & brake lines (ones along the frame) replaced. One brake line was replaced just before I acquired the Tahoe because it had developed a leak. The PO paid to have it fixed before I took ownership. The others probably should've been replaced at the same time. They're quite corroded, & I have yet to try changing the fuel filter for fear of line breakage. Since I'm about to do a brake overhaul anyway, I figured it was time to fix these lines before they decide to crap out. While I was doing an internet search about brake lines, I coincidentally came across a thread on another forum where the PO had posted about these lines. Unfortunately, he decided not to replace them for whatever reason.
__________________
_____________________________________________
Phillip

My Build threads:
1966 Chevy C-10 "Black Betty"

shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction)
http://67-72chevytrucks.com/vboard/s...ighlight=betty

1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver)
http://67-72chevytrucks.com/vboard/s...d.php?t=601142

Pics:
'66 C-10 https://flic.kr/s/aHsjHWD4h9
'97 Tahoe https://flic.kr/s/aHsjGZ7wKP
'93 C-1500 https://flic.kr/s/aHskxdpdnQ
'88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md

Previous Rides:
1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold)
1993 Chevy C-1500 short/step Retro-Rod (Sold)
1988 S-10 Blazer 2dr/2wd mild custom (Sold)
likaroc13 is offline   Reply With Quote
Old 12-03-2015, 12:35 AM   #149
likaroc13
Rollin' Old Skool
 
Join Date: Jun 2007
Location: Hattiesburg, MS
Posts: 5,371
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Still been gathering brake/fuel line parts. I got my new Ni-Copp lines a little while back, & now I'm in the process of getting stainless tube nuts. Hoping to never have to deal with rusting lines ever again. If it ever finds another owner someday, hopefully he'll appreciate the effort as well.

After 2 friggin' months waiting for my new Wheel Vintiques wheel, it finally showed up last week. I took it to be checked out today, & it looks like we finally have one that will work. I have to say, I'll probably never deal with Wheel Vintiques again. I can get the same style wheel from other manufacturers if ever needed. Now I just need to get it powder coated to match my others & then mounted up.

I'll snap some pics of my brake/fuel line overhaul parts before installation, just for reference.

Btw, I had a guy stop me at Wal-mart today to talk about the Tahoe. Even in all it's current ugliness, it still gets positive attention.
__________________
_____________________________________________
Phillip

My Build threads:
1966 Chevy C-10 "Black Betty"

shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction)
http://67-72chevytrucks.com/vboard/s...ighlight=betty

1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver)
http://67-72chevytrucks.com/vboard/s...d.php?t=601142

Pics:
'66 C-10 https://flic.kr/s/aHsjHWD4h9
'97 Tahoe https://flic.kr/s/aHsjGZ7wKP
'93 C-1500 https://flic.kr/s/aHskxdpdnQ
'88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md

Previous Rides:
1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold)
1993 Chevy C-1500 short/step Retro-Rod (Sold)
1988 S-10 Blazer 2dr/2wd mild custom (Sold)
likaroc13 is offline   Reply With Quote
Old 01-16-2016, 10:14 PM   #150
jcramsey
Registered User
 
jcramsey's Avatar
 
Join Date: Jun 2011
Location: Marion, NC
Posts: 851
Re: '97 Chevy Tahoe (2dr/2wd) mild custom

Hey Phillip, just now venturing over to the 88-98 board and saw your Tahoe in another thread. Love it man! Looks great with the steelies on it.
__________________
The Egg Hauler

The Government Mule
jcramsey is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:51 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com