Autometer Cluster Projects - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Putter · 03-10-2010, 03:29 PM

Quote:

Originally Posted by kgt

Is it rude to ask what something like that costs?....If so i understand. It looks fantastic!!...

Total?
My cluster has somewhere in the neighborhood of $700 in it. New gauges, new bezel, wiring harness parts, etc....

Or labor only?
(please PM me about this, since I am not a vendor). I just do this every now and then.

And....I just happen to have a few (spare) 3-3/8" gauges in the ProComp color scheme (black with white letting). They are (if I remember correctly) oil temp gauges. Now these are identical to Water temp....even down to the sending unit. Same thread pitch, same sensor bulb, etc... The only difference is the actual word "Oil" instead of "Water". So, technically, I figure you can install it to monitor either.

C20-67_N_MO · 02-20-2010, 04:03 PM

Man it's too bad they don't make the3 3/8" fuel gauges!

Those look great!!

djracer · 02-20-2010, 07:42 PM

Wasn't there a list of all the 3 3/8 part numbers some where on the board.

**Hart_Rod** · 02-20-2010, 08:10 PM

Quote:

Originally Posted by djracer

Wasn't there a list of all the 3 3/8 part numbers some where on the board.

WATER TEMP - 3 3/8" mechanical Part #5507
Fuel Gauge -3 3/8" electrical Part #5514
Oil Pressure - 3 3/8" mechanical Part #5505

JPCY72 · 02-20-2010, 08:17 PM

This is what Im using real wood! A friend made me two one with this vineer and a different vineer on the other one.

Mudder · 02-21-2010, 02:00 AM

You can find the white face 3 3/8 water temp and oil pressure still. Every so often you can find a fuel pressure guage 3 3/8 like above or a tranny temp guage. I have watched for a long time and I haven't seen any fuel guages. I have a 3 3/8 fuel pressure guage extra but I wouldn't mount it inside of a cab.

djracer · 02-21-2010, 02:03 AM

Mudder if that fuel pressure gauge doesn't come with an isolator they do make one. Fuel goes to it then something like antifreeze goes up to the back of the gauge.

Mudder · 02-21-2010, 02:09 AM

I didn't know anything about it but just what I read about it. I'm not even sure if it is all there. Shame cause it would sit in that center hole really nice.

**kev2809** · 02-23-2010, 07:35 PM

i dont want to sound like a cheapo..but i was in oreilly the other day and they had some cool reasonably priced gauges in there. they kinda look like this.

would they be worth the money? that one is an autometer gauge i think, like 54 bucks. but i think the others are a bit cheaper.

djracer · 02-23-2010, 09:02 PM

I would want them all to match each other even if they were different brands.

watahyahknow · 02-24-2010, 01:07 PM

its to bad you cant take them apart as eazy as a regulair cardash , there a lot of custom skins available for gauges wish would equal them verry nicely

drewdude92 · 02-24-2010, 02:25 PM

what size of aftermarket gauges fit in our bezels? idk if someone has asked cause i dont have time to look through

02-20-2010, 04:03 PM	#2
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Autometer Cluster Projects Man it's too bad they don't make the3 3/8" fuel gauges! Those look great!! __________________ Coming Soon: Project 1970 Country Truck

02-20-2010, 07:42 PM	#3
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Autometer Cluster Projects Wasn't there a list of all the 3 3/8 part numbers some where on the board. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-21-2010, 02:00 AM	#6
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: Autometer Cluster Projects You can find the white face 3 3/8 water temp and oil pressure still. Every so often you can find a fuel pressure guage 3 3/8 like above or a tranny temp guage. I have watched for a long time and I haven't seen any fuel guages. I have a 3 3/8 fuel pressure guage extra but I wouldn't mount it inside of a cab.

02-21-2010, 02:03 AM	#7
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Autometer Cluster Projects Mudder if that fuel pressure gauge doesn't come with an isolator they do make one. Fuel goes to it then something like antifreeze goes up to the back of the gauge. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-21-2010, 02:09 AM	#8
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: Autometer Cluster Projects I didn't know anything about it but just what I read about it. I'm not even sure if it is all there. Shame cause it would sit in that center hole really nice.

02-20-2010, 08:17 PM	#5
JPCY72 Registered User Join Date: May 2009 Location: Morongo Valley Posts: 130	Re: Autometer Cluster Projects This is what Im using real wood! A friend made me two one with this vineer and a different vineer on the other one.

02-23-2010, 07:35 PM	#9
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,140	Re: Autometer Cluster Projects i dont want to sound like a cheapo..but i was in oreilly the other day and they had some cool reasonably priced gauges in there. they kinda look like this. would they be worth the money? that one is an autometer gauge i think, like 54 bucks. but i think the others are a bit cheaper. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

02-23-2010, 09:02 PM	#10
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Autometer Cluster Projects I would want them all to match each other even if they were different brands. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-24-2010, 01:07 PM	#11
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Autometer Cluster Projects its to bad you cant take them apart as eazy as a regulair cardash , there a lot of custom skins available for gauges wish would equal them verry nicely __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

02-24-2010, 02:25 PM	#12
drewdude92 72 chevys 4 life Join Date: Aug 2008 Location: Crescent,Ok Posts: 406	Re: Autometer Cluster Projects what size of aftermarket gauges fit in our bezels? idk if someone has asked cause i dont have time to look through __________________ I dont call it being young and dumb....I call it young and havin fun



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.