For those waiting on Camaro caliper brackets.... - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 01-02-2008, 10:34 AM

Can these brackets be installed with the axles in? I want to pull my drums, but I don't have any brackets yet and I don't want to have to pull the axles twice.

Truckstr · 01-02-2008, 02:02 PM

Quote:

Originally Posted by Hart_Rod

Can these brackets be installed with the axles in? I want to pull my drums, but I don't have any brackets yet and I don't want to have to pull the axles twice.

No. The old backing plates have to come off. The only way to get them off is to pull the axles (unless you cut them off).

**Hart_Rod** · 01-02-2008, 04:58 PM

Quote:

Originally Posted by Truckstr

No. The old backing plates have to come off. The only way to get them off is to pull the axles (unless you cut them off).

I realize the axles have to come out to pull the old backing plates off. What I'm trying to figure out is, after I pull the backing plates off, If I put the axles back in and button up the differential, can I install Glocks brackets when I get them?

babyblueoval · 01-03-2008, 04:11 AM

Rob,

Looking at the pics on the 1st page and the page before this one, it looks like they will go on with the axle in. The piece that actually attaches to the flange is "C" shaped and the opening looks to be large enough to fit around the axle. At least that's the way it looks.
Maybe Bob will chime in a say for sure.

Truckstr · 01-03-2008, 10:44 AM

Quote:

Originally Posted by Hart_Rod

I realize the axles have to come out to pull the old backing plates off. What I'm trying to figure out is, after I pull the backing plates off, If I put the axles back in and button up the differential, can I install Glocks brackets when I get them?

Sorry, maybe I misunderstood. Yes, you can install the brackets with the axles in. No problem.

**Hart_Rod** · 01-03-2008, 11:46 AM

Quote:

Originally Posted by Truckstr

Sorry, maybe I misunderstood. Yes, you can install the brackets with the axles in. No problem.

I don't think I was doing a very good job asking,

. Thanks, now I'll go ahead and pull them. I just didn't want to do it twice. Thanks!

.

R

**Hart_Rod** · 01-10-2008, 05:39 PM

Has anyone tried mounting the Camaro or Impala dust shield? I think it would definitely help with the water if it will bolt up.

chevydog66 · 01-16-2008, 05:10 PM

Frizzle Fry, those look sweet!! Where did you get the rotors? Summit?

Frizzle Fry · 01-17-2008, 06:00 AM

Quote:

Originally Posted by Hart_Rod

Has anyone tried mounting the Camaro or Impala dust shield? I think it would definitely help with the water if it will bolt up.

That's a good idea. Now where to get some... Scrap yard I guess.

Quote:

Originally Posted by chevydog66

Frizzle Fry, those look sweet!! Where did you get the rotors? Summit?

Ya I dig it. They are summit rotors. They make the same style for the front so you can match front/rear.

Frizzle Fry · 01-17-2008, 06:07 AM

Not sure if I posted these in this thread but... A couple part numbers I used:

97 Camaro Parking Brake Cables: NAPA 94724

97 Camaro Flex Lines to Calipers: NAPA 380483

Both parts are not side specific.

**Hart_Rod** · 01-17-2008, 06:49 AM

Quote:

Originally Posted by Frizzle Fry

That's a good idea. Now where to get some... Scrap yard I guess.

I bet NAPA sells them....

glock35ipsc · 01-19-2008, 03:16 AM

Quote:

Originally Posted by Frizzle Fry

Not sure if I posted these in this thread but... A couple part numbers I used:

97 Camaro Parking Brake Cables: NAPA 94724

97 Camaro Flex Lines to Calipers: NAPA 380483

Both parts are not side specific.

Mike, thanks for posting those part numbers. I'll update the install instructions/price list.

BTW everyone, these are back!!!!! Check my website link in my profile! Should be ready to ship by the end of the month.

chevydog66 · 02-06-2008, 12:51 PM

What would it take to be able to use the Camaro caliper up front also? Just so they would match. Is the front Camaro caliper a dual piston? I have ordered my brackets and also bought the new Camaro calipers from Advanced auto for $160.

babyblueoval · 02-15-2008, 09:08 AM

Hey Bob,

What's the word on availability of the camaro brackets?
I've got my calipers are on the way.

chevydog66 · 02-15-2008, 12:17 PM

Ya,when will we get our brackets? I paid for mine on January 22. I already have my calipers, got em brand new for $160. We still have snow here so I'm in no hurry.

glock35ipsc · 02-15-2008, 11:37 PM

They all shipped out Tuesday. I have about 11 sets left. PM my with any questions.

chevydog66 · 02-16-2008, 12:32 AM

Kewl, can't wait. Now I need to order my drilled and slotted rotors from Summit.

jlaird · 02-16-2008, 05:24 AM

Quote:

Originally Posted by chevydog66

Ya,when will we get our brackets? I paid for mine on January 22. I already have my calipers, got em brand new for $160. We still have snow here so I'm in no hurry.

Where did you get the calipers?

Truckstr · 02-16-2008, 08:41 PM

Quote:

Originally Posted by jlaird

Where did you get the calipers?

Rock Auto (rockauto.com) is where I got mine.

chevydog66 · 02-16-2008, 09:42 PM

I bought mine from Advanced auto. A friend of mine is an assistant manager there.

**gregfull** · 02-16-2008, 11:16 PM

Quote:

Originally Posted by glock35ipsc

They all shipped out Tuesday. I have about 11 sets left. PM my with any questions.

Bob, PM sent.

babyblueoval · 02-17-2008, 10:48 PM

I got mine on eBay for $50 shipped.

When I get 'em we'll see if it's a good deal or not.

Frizzle Fry · 02-18-2008, 02:25 PM

Quote:

Originally Posted by Frizzle Fry

Not sure if I posted these in this thread but... A couple part numbers I used:

97 Camaro Parking Brake Cables: NAPA 94724

97 Camaro Flex Lines to Calipers: NAPA 380483

Both parts are not side specific.

Adding to the parts list: Banjo Bolts for the flex lines. Just noticed they didn't come with em...

**Hart_Rod** · 04-05-2008, 07:41 AM

OK, I finally got all my parts, (no thanks to NAPA's warehouse,

). I got the brackets installed on the rearend housing but I'm having a problem when I try to bolt the caliper up. There's a 3/8 to 1/2 gap between the mounting surface on the caliper and the mounting surface on the bracket. I thought I might have to shim a little, but not quite that much. Any suggestion? Pictures of problem....

glock35ipsc · 04-05-2008, 08:01 AM

Did you have the inner hole of the rotor machined to open it up to fit over the "bump" on the axle, allowing it to fully seat on the axle flange? That looks to be about the distance that the "bump" protruded out from the flange face.

01-02-2008, 10:34 AM	#126
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: For those waiting on Camaro caliper brackets.... Can these brackets be installed with the axles in? I want to pull my drums, but I don't have any brackets yet and I don't want to have to pull the axles twice. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-03-2008, 04:11 AM	#129
babyblueoval Registered User Join Date: Apr 2006 Location: Arkansas Posts: 835	Re: For those waiting on Camaro caliper brackets.... Rob, Looking at the pics on the 1st page and the page before this one, it looks like they will go on with the axle in. The piece that actually attaches to the flange is "C" shaped and the opening looks to be large enough to fit around the axle. At least that's the way it looks. Maybe Bob will chime in a say for sure. __________________ Jim '71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E '57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works '87 BMW 325i - daily driver

01-10-2008, 05:39 PM	#132
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: For those waiting on Camaro caliper brackets.... Has anyone tried mounting the Camaro or Impala dust shield? I think it would definitely help with the water if it will bolt up. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 01-11-2008 at 07:59 AM.

01-16-2008, 05:10 PM	#133
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: For those waiting on Camaro caliper brackets.... Frizzle Fry, those look sweet!! Where did you get the rotors? Summit? __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

01-17-2008, 06:07 AM	#135
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: For those waiting on Camaro caliper brackets.... Not sure if I posted these in this thread but... A couple part numbers I used: 97 Camaro Parking Brake Cables: NAPA 94724 97 Camaro Flex Lines to Calipers: NAPA 380483 Both parts are not side specific.

02-06-2008, 12:51 PM	#138
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: For those waiting on Camaro caliper brackets.... What would it take to be able to use the Camaro caliper up front also? Just so they would match. Is the front Camaro caliper a dual piston? I have ordered my brackets and also bought the new Camaro calipers from Advanced auto for $160. __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

02-15-2008, 09:08 AM	#139
babyblueoval Registered User Join Date: Apr 2006 Location: Arkansas Posts: 835	Re: For those waiting on Camaro caliper brackets.... Hey Bob, What's the word on availability of the camaro brackets? I've got my calipers are on the way. __________________ Jim '71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E '57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works '87 BMW 325i - daily driver

02-15-2008, 12:17 PM	#140
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: For those waiting on Camaro caliper brackets.... Ya,when will we get our brackets? I paid for mine on January 22. I already have my calipers, got em brand new for $160. We still have snow here so I'm in no hurry. __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up Last edited by chevydog66; 02-15-2008 at 12:19 PM.

02-15-2008, 11:37 PM	#141
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: For those waiting on Camaro caliper brackets.... They all shipped out Tuesday. I have about 11 sets left. PM my with any questions. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

02-16-2008, 12:32 AM	#142
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: For those waiting on Camaro caliper brackets.... Kewl, can't wait. Now I need to order my drilled and slotted rotors from Summit. __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

02-16-2008, 09:42 PM	#145
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: For those waiting on Camaro caliper brackets.... I bought mine from Advanced auto. A friend of mine is an assistant manager there. __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

02-17-2008, 10:48 PM	#147
babyblueoval Registered User Join Date: Apr 2006 Location: Arkansas Posts: 835	Re: For those waiting on Camaro caliper brackets.... I got mine on eBay for $50 shipped. When I get 'em we'll see if it's a good deal or not. __________________ Jim '71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E '57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works '87 BMW 325i - daily driver

04-05-2008, 07:41 AM	#149
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: For those waiting on Camaro caliper brackets.... OK, I finally got all my parts, (no thanks to NAPA's warehouse, ). I got the brackets installed on the rearend housing but I'm having a problem when I try to bolt the caliper up. There's a 3/8 to 1/2 gap between the mounting surface on the caliper and the mounting surface on the bracket. I thought I might have to shim a little, but not quite that much. Any suggestion? Pictures of problem.... Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

04-05-2008, 08:01 AM	#150
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: For those waiting on Camaro caliper brackets.... Did you have the inner hole of the rotor machined to open it up to fit over the "bump" on the axle, allowing it to fully seat on the axle flange? That looks to be about the distance that the "bump" protruded out from the flange face. __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.