Company Trucks - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

99 to Life · 10-03-2013, 10:36 AM

that front clip is looking beast mode. Luv the pic with all the engines in the BG, cool pic and great progress, even though it's someone else progress its still yours!

72BlckButy · 10-03-2013, 02:52 PM

Lookin' good Bryce!

**LEEVON** · 10-04-2013, 11:16 AM

Did you use CLR to rub the fender? I have been trying CLR with zero luck. Diluted, non-diluted, with and without scotch brite pads. I can't get the results I see everybody else getting.

69CST-V · 10-04-2013, 11:43 AM

LEEVON, the fender in the picture was just using straight buffing compound with a variable speed polisher and wool wheel. I used different speeds, let it dry then dry buffed. I tried different methods on other fenders but the end result was almost the same as with just the buffing compound. It was a fairly aggressive compound though.

Hope that helps.

**LEEVON** · 10-04-2013, 05:17 PM

Thanks, hadn't thought about going that route. Looking good!

**superflysteiny** · 10-15-2013, 11:27 AM

I have a 55 first series at my dads house I am thinking about building. Your trucks are really making me want one. Just wanted you to know. My wife will most likely kill me if I build it lol

**youngrodder** · 10-15-2013, 01:28 PM

Quote:

Originally Posted by superflysteiny

I have a 55 first series at my dads house I am thinking about building. Your trucks are really making me want one. Just wanted you to know. My wife will most likely kill me if I build it lol

We will let this message serve as exhibit A into evidence if something should happen to you after you start on the 55 project.

If it helps we woud love to see you build a 55 (1st series).

Marc

Bierkan · 10-15-2013, 01:46 PM

Quote:

Originally Posted by superflysteiny

I have a 55 first series at my dads house I am thinking about building. Your trucks are really making me want one. Just wanted you to know. My wife will most likely kill me if I build it lol

My wife said that, too. Then I brought the 50 home from Dad's. She doesn't"love" it, but she's okay with it.

**superflysteiny** · 10-15-2013, 02:20 PM

Mine will divorce me. Tootsie is bleeding me out slowly

69CST-V · 10-15-2013, 02:45 PM

Eric I could just send you mine then you could build it and not get into trouble. LOL

I would totally like to see how you would Steinify it.

69CST-V · 10-15-2013, 09:22 PM

Well my ADHD has kicked in and I started a small fun project. Went and picked up a 6.5 hp harbor freight special, some chromoly tubing, stopped by the local karting shop and got some goodies. Bam the makings of a motorized #drifttrike. I saw this in hotrod magazine and thought it looked cool. Anyway should have some truck updates soon.

69CST-V · 10-15-2013, 09:25 PM

One more.

**LEEVON** · 10-16-2013, 12:20 AM

Haha you got me googling drift bikes and motorized trikes...even searching craigslist for parts, thanks alot! Keep us posted on the distraction please.

69CST-V · 10-16-2013, 12:45 AM

Look on YouTube. Here is one example.

Motorized Drift Trike Battles - YouTube

Didn't mean to side track you. I thought it was just me that always seems to find another project before I finish the last one. LOL

72BlckButy · 10-16-2013, 06:19 AM

Love the new project. Ha.

Can I ask what a going rate it for the kart wheels and tires? I've have a project on the back burner but haven't pulled the plug on the wheels and tires. Also which shop did you go to in the kc area?

xpickup · 10-16-2013, 06:39 AM

69CST-V, THAT LOOKS FUN AS HELL!!! You will have to keep posting pictures as you build it.

superflysteiny, You need to build the 55. I love to watch your builds and would love to see what you would do to an AD. Just tell the wife , boy I am going to miss you! Joking of course.

Shannon

**superflysteiny** · 10-16-2013, 12:30 PM

Oh I want one of those so bad now

69CST-V · 10-16-2013, 02:37 PM

Quote:

Originally Posted by superflysteiny

Oh I want one of those so bad now

I'm building 3 to start. If they turn out good. We can talk. LOL

69CST-V · 10-16-2013, 02:46 PM

Quote:

Originally Posted by 72BlckButy

Love the new project. Ha.

Can I ask what a going rate it for the kart wheels and tires? I've have a project on the back burner but haven't pulled the plug on the wheels and tires. Also which shop did you go to in the kc area?

Nate I will find the receipt and verify but it's around $100 - 120 per wheel/tire combo depending on size and compound.

Oh and I went to Russell Karting. They had everything in stock so I paid a little more to solve my inability to wait. LOL

What's your back burner project? Motorized pedal car or something cool like that?

OrrieG · 10-16-2013, 02:46 PM

For all the guys (and girls in my kids case) that had Big Wheels. Daughters were absolutely fearless; especially on hills. I remember always replacing the wheels on them. I remember renting similar setups for the Oregon dunes in the 60's before ATV were manufactured. They only had a 4 horse briggs engine but were still fun.

99 to Life · 10-16-2013, 03:47 PM

those are hilarious, i'd love to have one too. Reminds me of go cart days as a kid. Wipe outs were plentiful.

69CST-V · 10-16-2013, 09:12 PM

Ok Nate has been working again. Sent me some pic's so I'll share. Let us know what you think.

99 to Life · 10-16-2013, 09:53 PM

looks great, obviously he designed that front xmember? I just love seeing those frame tables! and your truck of course

**oldman3** · 10-16-2013, 11:02 PM

Beautiful looking work going on, nice job...Jim

69CST-V · 10-19-2013, 12:24 PM

Ok since its my thread I will be high jacking it from time to time as I don't intend on doing a full blown Alternate Tinkering thread. Spent the last night drawing the first renderings of the Drift Trike. There has been tons of interest so I thought I would share my concept. I have a lot more but this will give you an idea of what I'm doing.

10-03-2013, 10:36 AM	#126
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: Company Trucks that front clip is looking beast mode. Luv the pic with all the engines in the BG, cool pic and great progress, even though it's someone else progress its still yours! __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

10-03-2013, 02:52 PM	#127
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Company Trucks Lookin' good Bryce! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

10-04-2013, 11:16 AM	#128
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: Company Trucks Did you use CLR to rub the fender? I have been trying CLR with zero luck. Diluted, non-diluted, with and without scotch brite pads. I can't get the results I see everybody else getting. __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

10-04-2013, 11:43 AM	#129
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: Company Trucks LEEVON, the fender in the picture was just using straight buffing compound with a variable speed polisher and wool wheel. I used different speeds, let it dry then dry buffed. I tried different methods on other fenders but the end result was almost the same as with just the buffing compound. It was a fairly aggressive compound though. Hope that helps. __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

10-04-2013, 05:17 PM	#130
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: Company Trucks Thanks, hadn't thought about going that route. Looking good! __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

10-15-2013, 11:27 AM	#131
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Company Trucks I have a 55 first series at my dads house I am thinking about building. Your trucks are really making me want one. Just wanted you to know. My wife will most likely kill me if I build it lol __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

10-15-2013, 02:20 PM	#134
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Company Trucks Mine will divorce me. Tootsie is bleeding me out slowly __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

10-15-2013, 02:45 PM	#135
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: Company Trucks Eric I could just send you mine then you could build it and not get into trouble. LOL I would totally like to see how you would Steinify it. __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

10-15-2013, 09:22 PM	#136
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: Company Trucks Well my ADHD has kicked in and I started a small fun project. Went and picked up a 6.5 hp harbor freight special, some chromoly tubing, stopped by the local karting shop and got some goodies. Bam the makings of a motorized #drifttrike. I saw this in hotrod magazine and thought it looked cool. Anyway should have some truck updates soon. Attached Images __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

10-15-2013, 09:25 PM	#137
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: Company Trucks One more. Attached Images __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

10-16-2013, 12:20 AM	#138
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: Company Trucks Haha you got me googling drift bikes and motorized trikes...even searching craigslist for parts, thanks alot! Keep us posted on the distraction please. __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

10-16-2013, 06:19 AM	#140
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Company Trucks Love the new project. Ha. Can I ask what a going rate it for the kart wheels and tires? I've have a project on the back burner but haven't pulled the plug on the wheels and tires. Also which shop did you go to in the kc area? __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

10-16-2013, 06:39 AM	#141
xpickup Registered User Join Date: Jan 2007 Location: York, Pa. Posts: 1,386	Re: Company Trucks 69CST-V, THAT LOOKS FUN AS HELL!!! You will have to keep posting pictures as you build it. superflysteiny, You need to build the 55. I love to watch your builds and would love to see what you would do to an AD. Just tell the wife , boy I am going to miss you! Joking of course. Shannon __________________ 48 Panel Truck 1948 Chevy / S10 1954 Chevy / S10 1951 Chevy / C4 47 Step van Lowered 1996 Dually

10-16-2013, 12:30 PM	#142
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Company Trucks Oh I want one of those so bad now __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

10-16-2013, 02:46 PM	#145
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: Company Trucks For all the guys (and girls in my kids case) that had Big Wheels. Daughters were absolutely fearless; especially on hills. I remember always replacing the wheels on them. I remember renting similar setups for the Oregon dunes in the 60's before ATV were manufactured. They only had a 4 horse briggs engine but were still fun. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project



Register or Log In To remove these advertisements.

10-16-2013, 03:47 PM	#146
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: Company Trucks those are hilarious, i'd love to have one too. Reminds me of go cart days as a kid. Wipe outs were plentiful. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

10-16-2013, 09:12 PM	#147
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: Company Trucks Ok Nate has been working again. Sent me some pic's so I'll share. Let us know what you think. Attached Images __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

10-16-2013, 09:53 PM	#148
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: Company Trucks looks great, obviously he designed that front xmember? I just love seeing those frame tables! and your truck of course __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

10-16-2013, 11:02 PM	#149
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Company Trucks Beautiful looking work going on, nice job...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

10-19-2013, 12:24 PM	#150
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: Company Trucks Ok since its my thread I will be high jacking it from time to time as I don't intend on doing a full blown Alternate Tinkering thread. Spent the last night drawing the first renderings of the Drift Trike. There has been tons of interest so I thought I would share my concept. I have a lot more but this will give you an idea of what I'm doing. Attached Images __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

Register or Log In To remove these advertisements.