02-01-2022, 11:12 AM | #126 |
Registered User
Join Date: Sep 2008
Location: Hampton, VA
Posts: 904
|
Re: '50 3600 re-do. Shortening things up!
Got a 33" Ididit column on order & will have to go back to the key in the dash. I never have been a fan of the aftermarket switches for these, just don't like the way they look. Thinking about going with this push button from Digital Dawg. Curious for those who may have tried one of these or similar if they like them?
__________________
Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making. |
02-07-2022, 06:38 PM | #127 |
Senior Member
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,774
|
Re: '50 3600 re-do. Shortening things up!
gorgeous work!
thats an interesting push to start, back in the mid 90s I had an alarm called HAALT that used the same technology, disarm as you walk up, and remote start (still had to put the key in and turn it). it was buggy then but I bet 25 years of improvement will make yours better.
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
02-08-2022, 12:55 AM | #128 | |
Registered User
Join Date: Sep 2008
Location: Hampton, VA
Posts: 904
|
Re: '50 3600 re-do. Shortening things up!
Quote:
__________________
Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making. |
|
02-08-2022, 10:12 AM | #129 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,174
|
Re: '50 3600 re-do. Shortening things up!
if swapping to an LS engine you may find a keyless option online. their power train control module runs the engine but I think it is the body control module that runs the door locks and cruise control etc, not sure on the keyless start thing. anyway, maybe figure that out before you lighten your wallet just to be sure all the modules will talk to each other and not require more modules to translate jibberish from one to another. ls1tech may be worth some time perusing. I have heard of guys with issues trying to get their cruise control to work with different steering columns and pcm's etc.
nice deal on the engine. if unclear on how long it sat you could boroscope down a spark plug hole to see if there is any rusty spots in the crosshatch cyl walls etc. should be fine though as a reputable shop would ensure the assembbly lube used would hold up for as long as possible. |
02-08-2022, 10:49 PM | #130 | |
Registered User
Join Date: Sep 2008
Location: Hampton, VA
Posts: 904
|
Re: '50 3600 re-do. Shortening things up!
Quote:
On the ignition, I don’t think there will be much of an issue because it’s carbureted, although I’ll more than likely switch over to a Holley Sniper.
__________________
Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making. |
|
02-13-2022, 08:53 AM | #131 |
Registered User
Join Date: Sep 2008
Location: Hampton, VA
Posts: 904
|
Re: '50 3600 re-do. Shortening things up!
Scope didn’t reveal any rust. Picked it up yesterday.
__________________
Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making. |
02-13-2022, 09:57 AM | #132 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,174
|
Re: '50 3600 re-do. Shortening things up!
now ya done it, started down the slippery slope. haha.
|
02-14-2022, 11:37 AM | #133 |
Registered User
Join Date: Sep 2008
Location: Hampton, VA
Posts: 904
|
Re: '50 3600 re-do. Shortening things up!
I KNOW!! Couldn't help it though! I gotta stop buying parts & focus on putting them on the truck! Dakota Digital HDX gauges, Ididit column, Digital Guard Dawg ignition, Nu-Relic power windows, Altman Latches, Roddoors ABS headliner & door panels, Raingear wiper system. If one ore box shows up at my house my wife will kill me!
__________________
Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making. |
02-14-2022, 01:09 PM | #134 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,174
|
Re: '50 3600 re-do. Shortening things up!
you need to have them sent to a buddies or a neighbours place, haha. have them boxed as shoes.........
|
02-14-2022, 10:09 PM | #135 | |
Registered User
Join Date: Sep 2008
Location: Hampton, VA
Posts: 904
|
Re: '50 3600 re-do. Shortening things up!
Quote:
Ha ha! Great idea!
__________________
Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making. |
|
02-26-2022, 10:38 PM | #136 |
Registered User
Join Date: Sep 2008
Location: Hampton, VA
Posts: 904
|
Re: '50 3600 re-do. Shortening things up!
Heard a lot of horror stories about the truck oil pan hanging to low on LS swaps, swapped it out & gained a few extra inches of clearance.
__________________
Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making. |
02-26-2022, 10:47 PM | #137 |
Registered User
Join Date: Sep 2008
Location: Hampton, VA
Posts: 904
|
Re: '50 3600 re-do. Shortening things up!
Got the Dirty Dingo A/C mounted up. Swapped out the truck water pump & started mocking up the fuel injection.
__________________
Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making. |
03-06-2022, 12:00 AM | #138 |
Registered User
Join Date: Sep 2008
Location: Hampton, VA
Posts: 904
|
Re: '50 3600 re-do. Shortening things up!
Mocked up the fuel rails and realized the Fitech kit didn’t include the injector wiring harness. I remember what someone told me about LS engines. He said unless you buy a complete junkyard engine you’d spend a fortune buying all the extra little stuff to make them run. So far I’ve had to buy the fuel injection kit, a/c, headers & down tubes, oil filler neck & cap, braided steam vents, throttle cable & bracket, oil filler tube, water pump (swapped the truck pump out for the car version), car oil pan & coil mounting brackets. Still gotta get a belt, the right power steering reservoir cap, a belt and coil harness AND decide what trans I’m going to use. I could use my 700r4, but doubt it will handle the power. Leaning towards a stage two 4L60 or 4L80.
__________________
Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making. |
03-06-2022, 12:09 AM | #139 |
Registered User
Join Date: Nov 2010
Location: calgary alberta
Posts: 8,174
|
Re: '50 3600 re-do. Shortening things up!
sure looks shiny.
bear in mind that the ls engines have a different offset to the torque converter etc so a flywheel spacer is possibly needed if running something that used to be behind a small block chevy. at least thats what I seem to remember. what kind of module or ecm will you run for your engine? the ecm needs to be able to run the trans as well, check around what will work best for you and your set up. some may have different gear ratios going through the gears as well. |
03-06-2022, 12:40 AM | #140 |
Senior Member
Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: '50 3600 re-do. Shortening things up!
Looks great..Jim
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
03-06-2022, 09:06 PM | #141 | |
Registered User
Join Date: Sep 2008
Location: Hampton, VA
Posts: 904
|
Re: '50 3600 re-do. Shortening things up!
Quote:
__________________
Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making. |
|
03-07-2022, 07:55 PM | #142 |
Senior Member
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,774
|
Re: '50 3600 re-do. Shortening things up!
pretty stuff!
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
05-21-2022, 12:38 AM | #143 |
Registered User
Join Date: Sep 2008
Location: Hampton, VA
Posts: 904
|
Re: '50 3600 re-do. Shortening things up!
Been sidelined with another bout with cancer, but all good now. Got a chance to sneak into the garage to work on my door handle swap. I shaved the original turn downs handles awhile back but decided to go with a set of push buttons with locks on both doors and Altman latches. Still got a little tweaking to do but I’m satisfied with the results.
https://www.flickr.com/photos/907005...posted-public/
__________________
Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making. Last edited by mobileortho; 05-22-2022 at 12:18 AM. |
05-22-2022, 04:38 PM | #144 |
Registered User
Join Date: Sep 2008
Location: Hampton, VA
Posts: 904
|
Re: '50 3600 re-do. Shortening things up!
Started playing around with the Nu-Relics power windows. I’m thinking I’m the channel needs replacing, it’s not fully seating up top.
__________________
Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making. |
05-25-2022, 08:30 AM | #145 |
Registered User
Join Date: Feb 2020
Location: Boulder, CO
Posts: 221
|
Re: '50 3600 re-do. Shortening things up!
What's the advantage of the Dirty Dingo setup for the low mount A/C? Asking because that's where my A/C is and I'd like to keep it there but I will need to clearance the frame. Thx
|
05-25-2022, 10:42 AM | #146 | |
Registered User
Join Date: Sep 2008
Location: Hampton, VA
Posts: 904
|
Re: '50 3600 re-do. Shortening things up!
Quote:
Here's a link to the forum: http://www.67-72chevytrucks.com/vboa...d.php?t=831032
__________________
Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making. |
|
05-25-2022, 11:11 AM | #147 |
Registered User
Join Date: Feb 2020
Location: Boulder, CO
Posts: 221
|
Re: '50 3600 re-do. Shortening things up!
Ok, Thanks. I will take a closer look. I will be integrating with Vintage air setup. I asked about using my stock compressor and they said it would work so I was trying to save some money. If I can keep from notching the frame, I'll take a look at the Sanden compressor.
|
06-05-2022, 03:19 PM | #148 |
Registered User
Join Date: Sep 2008
Location: Hampton, VA
Posts: 904
|
Re: '50 3600 re-do. Shortening things up!
Still limited on physical activities, but I figured test sitting the door panels couldn’t hurt me. I’ll cover them later.
__________________
Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making. |
07-31-2022, 09:15 AM | #149 |
Registered User
Join Date: Jul 2010
Location: Friggin Upstate NY.
Posts: 60
|
Re: '50 3600 re-do. Shortening things up!
I've been following your thread, I hope your doing well.
__________________
Hey, how exactly is a rainbow made? How exactly does the sun set? How exactly does the posi-trac rear end on a Plymouth work? It just does. Last edited by 61 son of a Gun; 07-31-2022 at 09:21 AM. |
07-31-2022, 09:55 PM | #150 |
Registered User
Join Date: Sep 2008
Location: Hampton, VA
Posts: 904
|
Re: '50 3600 re-do. Shortening things up!
Thanks for checking in on me. Like the truck, I’m still a work in progress, not 100% but I’m getting better. Haven’t had much time to work on the truck lately. Been busy helping raise my 2 & 3 year old grandsons & that leaves little time for anything else. I did manage to squeeze in a little time this weekend and worked on the cowl panels a bit. I’d hoped to have been finished by now but life happens.
__________________
Robert C. 1950 3600 3600 re-do, shortening it up If it's true what they say, "You learn from your mistakes," I'm a Genius in the making. |
Bookmarks |
|
|