The '67 Burb Build Thread

[babylonflyer]

whats up amigo .... greetings from Cali... very cool burban build...

[project 67 sub]

thanks, hows it going, where at in cali are you?

[Mkcustums]

Originally Posted by FRENCHBLUE72

Those look good imma about to install a set in my 56. Whats up with the so-cal on the back window? There are a few cars here in town with that on the back window?

Originally Posted by project 67 sub

well i have so-cal on their because i live in southern cali and im just representin it. but as to the fact that some people in oregon have it on their window is kind of dumb when they dont even live down here. but thats just my opinion.

2 1/2 year later response... So Cal clothing is owned and operated by No Fear Inc.

After I read that you wanted a one piece side window I saw your build thread and just read the entire build. Looks good I'll keep an eye on this for sure!

[project 67 sub]

haha its ok lol. and thanks. not a whole lot to read, mostly pics. makes it easier on people trying to catch up and what not

[babylonflyer]

Originally Posted by project 67 sub

thanks, hows it going, where at in cali are you?

from los angeles .... u running a one piece driveshaft or stock 2 ???

[project 67 sub]

Originally Posted by babylonflyer

from los angeles .... u running a one piece driveshaft or stock 2 ???

oh ok. its a stock 2 piece... well sort of, its the stock front half with a cpp slip joint rear and a flipped carrier bearing

[project 67 sub]

making some templates to box the lower arms in, and also got my 3" drop spindles.

[project 67 sub]

got a free '68 a/c dash from a buddy today, just had to remove it from the cutup cab

[67chevy1series]

the dash looks cool ,it will look like a 68 suburban with the markers filled

[kev2809]

nice score u plan on adding ac?
Posted via Mobile Device

[project 67 sub]

eventually it will have a/c, but dont know how far down the road that will be. want to run a vintage a/c style setup. so i figured get that and add it to the truck so it will already be their when i am ready

[67chevy1series]

Originally Posted by project 67 sub

eventually it will have a/c, but dont know how far down the road that will be. want to run a vintage a/c style setup. so i figured get that and add it to the truck so it will already be their when i am ready

that sounds like a smart decision!

[project 67 sub]

thats what i was thinking lol.

[project 67 sub]

no pics but i picked up another set of bags and some fittings to run them shraders, some 2600 doms. will be installing those in the back and removing the dual 3/4 port 4 ply 2600 contis and putting them in the front. also picked up a few more tools to use when working on the truck.

edit: on that dash i will be cutting the center section out and plating it so its smooth then i will cut a new hole in it lower down for the in dash i plan to run. might add a few other things to as well just not sure what yet.

[project 67 sub]

ordered a double adjustable panhard bar today from porterbuilt . i already cant wait for it

[kev2809]

nice..

make sure you get the longest one they sell.i got the short one by mistake. instead of sending it back, i sectioned the metal and welded a solid rod in the middle to make it reach...sure hope my welds hold lol

[project 67 sub]

thanks, and i'm pretty stoked to have my first piece from the porterbuilt line coming and will hopfully be buying more from him down the road. the one that i ordered from him is the same one that comes in his stage 2 drop kit, it mounts just like the cpp double adjustable track bar.

[project 67 sub]

here is another pic of the burb as it sits right now, just in the garage.

stocking up on some parts and tools, still more to come

some 2600 dominators and a couple fittings to run on shraders

cpp front upper shock relocating brackets

and the grey dash pad that i bought from gringoloco

[kev2809]

nice! i could have sent ya the t's i used when i ran temporary schraders...they are 1/2" t's with the schrader in the middle.

also, what shock ya plan on goin with? i bought some 50's chrysler shocks and they bolt right up...just installed them last night. i havent put the wheels back on yet to check fully inflated and fully deflated to see if they bottom out, but they sure are a cheap alternative.

[project 67 sub]

Originally Posted by kev2809

nice! i could have sent ya the t's i used when i ran temporary schraders...they are 1/2" t's with the schrader in the middle.

also, what shock ya plan on goin with? i bought some 50's chrysler shocks and they bolt right up...just installed them last night. i havent put the wheels back on yet to check fully inflated and fully deflated to see if they bottom out, but they sure are a cheap alternative.

haha oh well lol. as far as shocks not sure yet, i have a set of stock replacements from autozone that i will probably run in the mean time if they work, but if not, then i will have to find something else to use. also got a pic of the ones you used and where did you get them???

[kev2809]

oh, well since you have the relocation kits im pretty sure your stock shocks should work. the ones i bought are Monroe pn#5752, got them at O'reilly for $22.99 each. heres a pic..



the only thing i had to do was trim the bushing a little to make it fit in between the mount..but i believe my mounts are after market (the nut for the bolt would hit the arm next to the mount as it got tighter)

ill snap a pic tomorrow when i get off work

[project 67 sub]

haha for sure thanks bro.

[Mkcustums]

Not tryin to jack your thread, but "Rockstars" look pretty damn good on laid out black Suburbans!

In your sig - "...and black 20" wheels and tires (20" KMC Rockstars eventually)"

[project 67 sub]

haha no problem, that is a pretty sweet burb minus the green flames, ugly tail lights, and newer front end though.

[kev2809]

man that does look good!