Project: Turbo 250 - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jchav62 · 02-08-2012, 06:42 PM

Cool build!!

longbed67 · 02-08-2012, 06:45 PM

Thanks Joe! It will be cooler when I get my block and head back hopefully next week so I can start getting that back together! It was supposed to be done almost two weeks ago which was the deadline I gave them when I dropped it off!

longbed67 · 02-13-2012, 07:06 PM

Well I got back from the Chicago auto show and well I fell in love with this color the moment i seen it. It is an upgrade color option for the 2012 Porsche 911 Carrera S. The pic really doesn't do justice for how much depth and pop the color has. On top of it the cost is the same price as the other paint I was looking at which is $680 per gallon. All copyright goes to Porsche on this photo just want to give them credit for it.

FRENCHBLUE72 · 02-13-2012, 09:19 PM

Good choice in color..

longbed67 · 02-22-2012, 09:18 PM

Well I just got the the bell housing back from the machine shop got it welded up cause the starter tab had broke off. I also dropped off my turbo manifold to have it counter bored and to have the center divider milled out of it. I will get that back tomorrow. Everything is on schedule to pick up my rear end and head and camshaft this sat. from Tom Lowe. I had him set the rear up with an eaton posi. And he did all the porting and head work for me. I was told that I will have the engine back in my hands next week! Which means I can get going on the final assembly and paint on the engine!!!!

longbed67 · 02-24-2012, 12:28 AM

Well I ended up braving the snow and ice storm tonight and made the normally 2 hour trip one way to Tom's place in Dysart and picked up my rear. He rebuilt the posi with new gears kevlar composite clutches, 400lb springs, 10ga sideplates and I ended up putting in 3.07 gears instead of the 2.76. I also picked up the head, it looks great and am really happy with the work he has done. 70 cc chamber 1.94/1.60 valves, and enough spring for .550 lift at 6500rpm. Although I went with the smaller cam for .495 of lift which means more rpm but I think i will cap her off at 6 grand.

**67cheby** · 02-24-2012, 11:44 AM

this is sure a whole lot of talk and not enough pics....just sayin !

longbed67 · 02-24-2012, 12:53 PM

Lots of pics coming tonight! Should have them of the engine, head, and rear hopefully with the drilled and slotted brakes installed.

**67cheby** · 02-24-2012, 01:02 PM

nice , will be watching !

dhaymaker · 02-24-2012, 01:30 PM

Quote:

Originally Posted by 67cheby

this is sure a whole lot of talk and not enough pics....just sayin !

^

longbed67 · 02-24-2012, 06:58 PM

pic

longbed67 · 02-24-2012, 07:02 PM

more pics

**67cheby** · 02-24-2012, 07:05 PM

Oh man that looks sweet !! What color is the block going to be ?
Posted via Mobile Device

longbed67 · 02-24-2012, 07:17 PM

Bright Chevy Orange! I will post a few more pics later of some of the covers. I am going to get working on brakes on the rear end. and get that installed. And post more pics of that later!

longbed67 · 03-01-2012, 10:57 AM

Well everything for the engine comes home today!

Just have to wait for my pushrods to get made before I can assemble, but otherwise she will be seeing some paint this weekend! Hopefully I can get the trans painted up too!

longbed67 · 03-02-2012, 11:16 AM

Got up at 4 this morning to start working getting everything organized again.... and took a couple quick shots of the set up

**67cheby** · 03-02-2012, 02:09 PM

looking good !

jchav62 · 03-02-2012, 04:54 PM

Looks nice! Can't wait to see more...

longbed67 · 03-03-2012, 12:11 AM

Engine Painted and cleared, Check.
Trans and Bellhousing Painted and cleared, Check.
New Kevlar Clutch rated for 650 ft lbs of torque ordered and being built. Check.
Rear brake install being a pain in my @$$. Check

I'll Post some pics up in the morning.

slick copper · 03-03-2012, 05:36 AM

Quote:

Originally Posted by longbed67

Engine Painted and cleared, Check.
Trans and Bellhousing Painted and cleared, Check.
New Kevlar Clutch rated for 650 ft lbs of torque ordered and being built. Check.
Rear brake install being a pain in my @$$. Check

I'll Post some pics up in the morning.

Can't wait!

Guess I'll have to wait on the pics to see what color you went with on the bellhousing and transmission!

hgs_notes · 03-03-2012, 10:11 AM

I really like your build, but was wondering if there was any particular reason you went with the 250 rather than doing the same with a 292. Seems like there would be quite a bit more power potential. Is there a difference in the blocks or cranks that make it a weaker choice? Or was it just to use the engine you had?

**67cheby** · 03-03-2012, 11:32 AM

its the morning...just sayin

FRENCHBLUE72 · 03-03-2012, 03:54 PM

Sittin here waiting in the pacific northwest..

longbed67 · 03-03-2012, 04:37 PM

Heres the first set

longbed67 · 03-03-2012, 04:39 PM

Heres some more.... I am not sure I am a big fan of this Red HEI I think it looks a little tacky.... I am thinking about painting it.

02-08-2012, 06:42 PM	#126
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: Project: Turbo 250 Cool build!! __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

02-08-2012, 06:45 PM	#127
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Project: Turbo 250 Thanks Joe! It will be cooler when I get my block and head back hopefully next week so I can start getting that back together! It was supposed to be done almost two weeks ago which was the deadline I gave them when I dropped it off! __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

02-13-2012, 07:06 PM	#128
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Project: Turbo 250 Well I got back from the Chicago auto show and well I fell in love with this color the moment i seen it. It is an upgrade color option for the 2012 Porsche 911 Carrera S. The pic really doesn't do justice for how much depth and pop the color has. On top of it the cost is the same price as the other paint I was looking at which is $680 per gallon. All copyright goes to Porsche on this photo just want to give them credit for it. Attached Images __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

02-13-2012, 09:19 PM	#129
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project: Turbo 250 Good choice in color.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-22-2012, 09:18 PM	#130
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Project: Turbo 250 Well I just got the the bell housing back from the machine shop got it welded up cause the starter tab had broke off. I also dropped off my turbo manifold to have it counter bored and to have the center divider milled out of it. I will get that back tomorrow. Everything is on schedule to pick up my rear end and head and camshaft this sat. from Tom Lowe. I had him set the rear up with an eaton posi. And he did all the porting and head work for me. I was told that I will have the engine back in my hands next week! Which means I can get going on the final assembly and paint on the engine!!!! __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

02-24-2012, 12:28 AM	#131
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Project: Turbo 250 Well I ended up braving the snow and ice storm tonight and made the normally 2 hour trip one way to Tom's place in Dysart and picked up my rear. He rebuilt the posi with new gears kevlar composite clutches, 400lb springs, 10ga sideplates and I ended up putting in 3.07 gears instead of the 2.76. I also picked up the head, it looks great and am really happy with the work he has done. 70 cc chamber 1.94/1.60 valves, and enough spring for .550 lift at 6500rpm. Although I went with the smaller cam for .495 of lift which means more rpm but I think i will cap her off at 6 grand. __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706 Last edited by longbed67; 02-24-2012 at 07:20 PM. Reason: Incorrect valve lift

02-24-2012, 11:44 AM	#132
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project: Turbo 250 this is sure a whole lot of talk and not enough pics....just sayin ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-24-2012, 12:53 PM	#133
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Project: Turbo 250 Lots of pics coming tonight! Should have them of the engine, head, and rear hopefully with the drilled and slotted brakes installed. __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

02-24-2012, 01:02 PM	#134
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project: Turbo 250 nice , will be watching ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-24-2012, 06:58 PM	#136
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Project: Turbo 250 pic Attached Images __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

02-24-2012, 07:02 PM	#137
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Project: Turbo 250 more pics Attached Images __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

02-24-2012, 07:05 PM	#138
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project: Turbo 250 Oh man that looks sweet !! What color is the block going to be ? Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-24-2012, 07:17 PM	#139
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Project: Turbo 250 Bright Chevy Orange! I will post a few more pics later of some of the covers. I am going to get working on brakes on the rear end. and get that installed. And post more pics of that later! __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

03-01-2012, 10:57 AM	#140
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Project: Turbo 250 Well everything for the engine comes home today! Just have to wait for my pushrods to get made before I can assemble, but otherwise she will be seeing some paint this weekend! Hopefully I can get the trans painted up too! __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

03-02-2012, 11:16 AM	#141
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Project: Turbo 250 Got up at 4 this morning to start working getting everything organized again.... and took a couple quick shots of the set up Attached Images __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706



Register or Log In To remove these advertisements.

03-02-2012, 02:09 PM	#142
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project: Turbo 250 looking good ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-02-2012, 04:54 PM	#143
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: Project: Turbo 250 Looks nice! Can't wait to see more... __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

03-03-2012, 12:11 AM	#144
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Project: Turbo 250 Engine Painted and cleared, Check. Trans and Bellhousing Painted and cleared, Check. New Kevlar Clutch rated for 650 ft lbs of torque ordered and being built. Check. Rear brake install being a pain in my @$$. Check I'll Post some pics up in the morning. __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

03-03-2012, 10:11 AM	#146
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Project: Turbo 250 I really like your build, but was wondering if there was any particular reason you went with the 250 rather than doing the same with a 292. Seems like there would be quite a bit more power potential. Is there a difference in the blocks or cranks that make it a weaker choice? Or was it just to use the engine you had? __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

03-03-2012, 11:32 AM	#147
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project: Turbo 250 its the morning...just sayin __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-03-2012, 03:54 PM	#148
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Project: Turbo 250 Sittin here waiting in the pacific northwest.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-03-2012, 04:37 PM	#149
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Project: Turbo 250 Heres the first set Attached Images __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

03-03-2012, 04:39 PM	#150
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Project: Turbo 250 Heres some more.... I am not sure I am a big fan of this Red HEI I think it looks a little tacky.... I am thinking about painting it. Attached Images __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

Register or Log In To remove these advertisements.