The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-14-2014, 12:43 AM   #126
KTSK10
Registered User
 
KTSK10's Avatar
 
Join Date: Jan 2014
Location: Yukon, Oklahoma
Posts: 47
Re: 1964-1966 center a/c vent

Quote:
Originally Posted by ncoonen View Post
I kind of like having the corner broken off...adds some style and patina points.
I love the instructions below the A/C Controller.

__________________
It starts as a diamond in the rough.
KTSK10 is offline   Reply With Quote
Old 06-15-2014, 09:38 AM   #127
chad64chevy
Registered User
 
chad64chevy's Avatar
 
Join Date: Mar 2011
Location: tulsa,ok.
Posts: 1,803
Re: 1964-1966 center a/c vent

the side vents look great! so if the complete center is $300 what is it with the smaller vents? wondering what a total setup is going to cost me!!
chad64chevy is offline   Reply With Quote
Old 06-15-2014, 10:26 AM   #128
corvettejim1968
Registered User
 
corvettejim1968's Avatar
 
Join Date: Jun 2011
Location: Phoenix,AZ
Posts: 946
Re: 1964-1966 center a/c vent

Quote:
Originally Posted by chad64chevy View Post
the side vents look great! so if the complete center is $300 what is it with the smaller vents? wondering what a total setup is going to cost me!!
im not sure just yet but for a complete set it will be a little cheaper than buying a piece at a time. most of my cost comes from having the parts chromed and the shipping.
__________________
Hand Made Factory reproduction A/C vents
text or call 602-361-6421
Website for A/C vents
https://coolc10.com/

Last edited by corvettejim1968; 06-15-2014 at 10:40 AM. Reason: add
corvettejim1968 is offline   Reply With Quote
Old 06-16-2014, 08:32 AM   #129
corvettejim1968
Registered User
 
corvettejim1968's Avatar
 
Join Date: Jun 2011
Location: Phoenix,AZ
Posts: 946
Re: 1964-1966 center a/c vent

i made the first half of the smaller vent ball mold over the weekend. i should be able to finish up the top half next Sunday.
__________________
Hand Made Factory reproduction A/C vents
text or call 602-361-6421
Website for A/C vents
https://coolc10.com/
corvettejim1968 is offline   Reply With Quote
Old 06-22-2014, 06:24 PM   #130
nsb29
Senior Member
 
nsb29's Avatar
 
Join Date: Feb 2014
Location: new smyrna beach fl / 29 palms cal
Posts: 1,727
Re: 1964-1966 center a/c vent

you think heed tell you aggie

Last edited by nsb29; 06-22-2014 at 06:29 PM.
nsb29 is offline   Reply With Quote
Old 06-25-2014, 12:00 AM   #131
corvettejim1968
Registered User
 
corvettejim1968's Avatar
 
Join Date: Jun 2011
Location: Phoenix,AZ
Posts: 946
Re: 1964-1966 center a/c vent

okay got the first small "stock looking" vent ball done a few minutes ago. turned out great. i put one drop of red dye just to mark it as #1



what is was and what it will be

__________________
Hand Made Factory reproduction A/C vents
text or call 602-361-6421
Website for A/C vents
https://coolc10.com/

Last edited by corvettejim1968; 06-25-2014 at 12:04 AM. Reason: add
corvettejim1968 is offline   Reply With Quote
Old 06-25-2014, 07:52 AM   #132
ms2335
Senior Member
 
ms2335's Avatar
 
Join Date: Jan 2009
Location: glenmora. la
Posts: 290
Re: 1964-1966 center a/c vent

LOOKS GREAT!!! Can't wait to get mine. Guess now I need the three vents for the center faceplate and two side vents when available.
__________________
65 Chevy C10 Short Fleet BBW 6.0L/4l80E
68 Chevy C10 SWB 6.0L/4L80E
84 Chevy C10 SWB 5.3/4l60E QA1 Suspension
ms2335 is offline   Reply With Quote
Old 06-26-2014, 10:15 AM   #133
Budman56
Registered User
 
Budman56's Avatar
 
Join Date: Aug 2011
Location: Patterson California
Posts: 1,133
Re: 1964-1966 center a/c vent

corvettejim1968 I don't know how I miss this thread, But I got to say your the man....... these look great! this does give me some ideals. I do have one question where did you get your vent balls chromed?
__________________
MY 65 C20 BUILD
http://67-72chevytrucks.com/vboard/s...d.php?t=483346

......................_____
.........________//__{\_____
,,,,,,,/__(O)___//___/__(O)_/
Budman56 is offline   Reply With Quote
Old 06-26-2014, 11:06 AM   #134
K5 Addiction
Registered User
 
K5 Addiction's Avatar
 
Join Date: Jul 2011
Location: Tennessee
Posts: 404
Re: 1964-1966 center a/c vent

This is awesome! Excellent work. I just shared this link with a friend at Vintage air as this would be an amazing addition to their sure fit kits. I would love to see a complete modern AC kit with the original vent. Fantastic work stepping up & filling the void in the market. I know it will pay off for you.
K5 Addiction is offline   Reply With Quote
Old 06-26-2014, 11:13 AM   #135
aggie91
I'm just glad to be here!
 
aggie91's Avatar
 
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
Re: 1964-1966 center a/c vent

Quote:
Originally Posted by nsb29 View Post
you think heed tell you aggie
He did tell me in post 125.
__________________
Karl



1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues)
http://67-72chevytrucks.com/vboard/s...d.php?t=372424

The LST Challenge:
http://67-72chevytrucks.com/vboard/s...=1#post7812257

Korbin's 1st Square: "Sunburn"
http://67-72chevytrucks.com/vboard/s...d.php?t=418618

1985 GMC Sierra: "White Trash", Korbin's 2nd now...
http://67-72chevytrucks.com/vboard/s...d.php?t=632305

Henry - 1984 Chevrolet, Owen's 1st Square
aggie91 is offline   Reply With Quote
Old 06-26-2014, 11:15 AM   #136
aggie91
I'm just glad to be here!
 
aggie91's Avatar
 
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
Re: 1964-1966 center a/c vent

That red ball looks kinda neat in the housing. Could you do them in Black to save on getting them chromed if someone whated that option?
__________________
Karl



1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues)
http://67-72chevytrucks.com/vboard/s...d.php?t=372424

The LST Challenge:
http://67-72chevytrucks.com/vboard/s...=1#post7812257

Korbin's 1st Square: "Sunburn"
http://67-72chevytrucks.com/vboard/s...d.php?t=418618

1985 GMC Sierra: "White Trash", Korbin's 2nd now...
http://67-72chevytrucks.com/vboard/s...d.php?t=632305

Henry - 1984 Chevrolet, Owen's 1st Square
aggie91 is offline   Reply With Quote
Old 06-26-2014, 06:59 PM   #137
JOHNS65
Registered User
 
Join Date: Oct 2013
Location: western springs il
Posts: 7
Re: 1964-1966 center a/c vent

this message is for corvettejim1968 I am very interested in purchasing the complete center ac vent diffuser for a64-66 c10 truck could information to jmathieu@sbcglobal.net or my phone 708 829 4771 thank you john mathieu
JOHNS65 is offline   Reply With Quote
Old 06-26-2014, 08:31 PM   #138
corvettejim1968
Registered User
 
corvettejim1968's Avatar
 
Join Date: Jun 2011
Location: Phoenix,AZ
Posts: 946
Re: 1964-1966 center a/c vent

Quote:
Originally Posted by aggie91 View Post
That red ball looks kinda neat in the housing. Could you do them in Black to save on getting them chromed if someone whated that option?
sure if you wanted them black i could just dye them that color and you would get your parts alot faster too.
__________________
Hand Made Factory reproduction A/C vents
text or call 602-361-6421
Website for A/C vents
https://coolc10.com/
corvettejim1968 is offline   Reply With Quote
Old 06-27-2014, 07:34 PM   #139
corvettejim1968
Registered User
 
corvettejim1968's Avatar
 
Join Date: Jun 2011
Location: Phoenix,AZ
Posts: 946
Re: 1964-1966 center a/c vent

so the last vent ball i made is 2 1/4 tall. i just got a new one in today that is 2in tall . i will start the mold for it this weekend. now we will have a couple choices for the small vent balls on the outer sides of the dash.

__________________
Hand Made Factory reproduction A/C vents
text or call 602-361-6421
Website for A/C vents
https://coolc10.com/
corvettejim1968 is offline   Reply With Quote
Old 06-29-2014, 11:21 PM   #140
MalibuKasey
Artist
 
MalibuKasey's Avatar
 
Join Date: Jan 2010
Location: Rockwell NC
Posts: 422
Re: 1964-1966 center a/c vent

Wow!!! Just stumbled on this. I need a set of those side vents! Let us know when they are ready! Nice work!!!
__________________
66 Chevy C10 283ci~cough~ SBW Fleet Buttercup '66
MalibuKasey is offline   Reply With Quote
Old 06-30-2014, 08:41 AM   #141
corvettejim1968
Registered User
 
corvettejim1968's Avatar
 
Join Date: Jun 2011
Location: Phoenix,AZ
Posts: 946
Re: 1964-1966 center a/c vent

got the first half of the new smallest vent ball mold done. looks like i cant find the center vent clip so i am going to try and cast it as well. we may have to glue it in on final assembly but I'm sure it will work just fine. i will keep you all posted. and thanks again for the kind words.
__________________
Hand Made Factory reproduction A/C vents
text or call 602-361-6421
Website for A/C vents
https://coolc10.com/
corvettejim1968 is offline   Reply With Quote
Old 06-30-2014, 08:56 PM   #142
likaroc13
Rollin' Old Skool
 
Join Date: Jun 2007
Location: Hattiesburg, MS
Posts: 5,371
Re: 1964-1966 center a/c vent

Man, so glad I was just browsing the FAQ section which led me to thinking about another member. When I searched his posts, I came upon this thread. I remember seeing some talk from a couple folks about making this happen, but I'm so glad to see it's working out for you! Luckily for me, my dad found an original in good shape from an A/C cab he bought a while back. If I end up needing anything though, I know where to look. Congrats, & keep up the nice work!
__________________
_____________________________________________
Phillip

My Build threads:
1966 Chevy C-10 "Black Betty"

shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction)
http://67-72chevytrucks.com/vboard/s...ighlight=betty

1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver)
http://67-72chevytrucks.com/vboard/s...d.php?t=601142

Pics:
'66 C-10 https://flic.kr/s/aHsjHWD4h9
'97 Tahoe https://flic.kr/s/aHsjGZ7wKP
'93 C-1500 https://flic.kr/s/aHskxdpdnQ
'88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md

Previous Rides:
1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold)
1993 Chevy C-1500 short/step Retro-Rod (Sold)
1988 S-10 Blazer 2dr/2wd mild custom (Sold)
likaroc13 is offline   Reply With Quote
Old 07-01-2014, 02:29 PM   #143
corvettejim1968
Registered User
 
corvettejim1968's Avatar
 
Join Date: Jun 2011
Location: Phoenix,AZ
Posts: 946
Re: 1964-1966 center a/c vent

parts are coming along.


__________________
Hand Made Factory reproduction A/C vents
text or call 602-361-6421
Website for A/C vents
https://coolc10.com/
corvettejim1968 is offline   Reply With Quote
Old 07-01-2014, 02:36 PM   #144
corvettejim1968
Registered User
 
corvettejim1968's Avatar
 
Join Date: Jun 2011
Location: Phoenix,AZ
Posts: 946
Re: 1964-1966 center a/c vent

the newest vent ball. now i need to make the mold.

__________________
Hand Made Factory reproduction A/C vents
text or call 602-361-6421
Website for A/C vents
https://coolc10.com/
corvettejim1968 is offline   Reply With Quote
Old 07-13-2014, 10:23 PM   #145
corvettejim1968
Registered User
 
corvettejim1968's Avatar
 
Join Date: Jun 2011
Location: Phoenix,AZ
Posts: 946
Re: 1964-1966 center a/c vent

did some more work on the 2in vent ball mold today.

made the 1st clip and it was too thin. it did not grab tight enough. so i made another mold and made it about 3 times as thick. because its resin and not metal it did not stay when you pushed on the center vent. so i drilled a couple of holes for the "teeth" to drop into and it came out perfect. the next faceplate mold i will make it will have the holes in it . this is taking me longer than i thought. its allot more work than i expected but i am making progress every weekend. please bare with me.




__________________
Hand Made Factory reproduction A/C vents
text or call 602-361-6421
Website for A/C vents
https://coolc10.com/

Last edited by corvettejim1968; 07-13-2014 at 10:24 PM. Reason: add
corvettejim1968 is offline   Reply With Quote
Old 07-14-2014, 10:21 PM   #146
Just-in-credible
Registered User
 
Just-in-credible's Avatar
 
Join Date: Jan 2013
Location: Calgary, Alberta
Posts: 186
Re: 1964-1966 center a/c vent

I have to say, your work is Simply amazing. And here thought I really was doing good when I filled a shifter ball full of epoxy, rubbed a little grease on the shifter handle, and held it in place while the epoxy cured so I could 'adapt threads' hahahaha.
Just-in-credible is offline   Reply With Quote
Old 07-15-2014, 08:21 PM   #147
corvettejim1968
Registered User
 
corvettejim1968's Avatar
 
Join Date: Jun 2011
Location: Phoenix,AZ
Posts: 946
Re: 1964-1966 center a/c vent

Quote:
Originally Posted by Just-in-credible View Post
I have to say, your work is Simply amazing. And here thought I really was doing good when I filled a shifter ball full of epoxy, rubbed a little grease on the shifter handle, and held it in place while the epoxy cured so I could 'adapt threads' hahahaha.
thanks for the compliment I had a good teacher so I need to give him credit for taking me under his wing.
__________________
Hand Made Factory reproduction A/C vents
text or call 602-361-6421
Website for A/C vents
https://coolc10.com/
corvettejim1968 is offline   Reply With Quote
Old 07-15-2014, 11:02 PM   #148
oldies1938
Registered User
 
Join Date: May 2013
Location: chino hills ca
Posts: 91
Re: 1964-1966 center a/c vent

how much for 2 chrome ac balls for 66 chevy?? thanks
oldies1938 is offline   Reply With Quote
Old 07-15-2014, 11:03 PM   #149
corvettejim1968
Registered User
 
corvettejim1968's Avatar
 
Join Date: Jun 2011
Location: Phoenix,AZ
Posts: 946
Re: 1964-1966 center a/c vent

Quote:
Originally Posted by oldies1938 View Post
how much for 2 chrome ac balls for 66 chevy?? thanks
$100 for the pair. new with new chrome. free shipping
__________________
Hand Made Factory reproduction A/C vents
text or call 602-361-6421
Website for A/C vents
https://coolc10.com/

Last edited by corvettejim1968; 07-15-2014 at 11:04 PM. Reason: add
corvettejim1968 is offline   Reply With Quote
Old 07-16-2014, 07:48 PM   #150
corvettejim1968
Registered User
 
corvettejim1968's Avatar
 
Join Date: Jun 2011
Location: Phoenix,AZ
Posts: 946
Re: 1964-1966 center a/c vent

update........ the 5 test parts are done and i just paid the guy so they will be shipped to my door sometime next week. that means i will have the 1st complete assembly ready for sale very soon.
__________________
Hand Made Factory reproduction A/C vents
text or call 602-361-6421
Website for A/C vents
https://coolc10.com/
corvettejim1968 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:05 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com