For Sale: Billet Aluminum Dash Panels - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**passthebuck** · 08-12-2008, 05:43 PM

Here's where I'm at with mine right now. I've got more to do though...

Ryan Hubbard · 08-12-2008, 05:58 PM

Nice Job on the dash panel. If you run into any issues, please don't hesitate to contact me.

As far as a website goes, I am working with another company that makes gauges and we will be putting the dash boards on his website. We are also going to have a set of custom gauges made just for the dash. The website is www.thomaskirkham.com . I have not been able to put up a website of my own because I have doubled the size of my engineering company and hired new employees and am moving into a new building in September. So between training new employees, designing a new building and buying new equipment I have not had any spare time to do a website. I hope to have the dash panels on the website in a couple weeks.

*Shane* · 08-12-2008, 06:52 PM

did you ever do any design work to allow for the gages to be mounted BEHIND the dash panel?

NWD02 · 08-12-2008, 11:21 PM

Awesome! Nice job with the panel and glove box door. What's the price on a set?

Ryan Hubbard · 08-13-2008, 01:17 AM

I have updated the first post and other posts in here to reflect current pricing. I sell the dash panel for $275.00 and the Glove Box Door for $175.00. This includes UPS ground shipping. You can either contact me at ryan.hubbard@aspencontrols.com or call me at 562-595-7545.

mahanian · 08-13-2008, 01:25 AM

Hey Ryan,
I sent you payment about an hour ago, thanks again for a great product!

Riveted1 · 08-13-2008, 02:50 AM

Quote:

Originally Posted by Shane

did you ever do any design work to allow for the gages to be mounted BEHIND the dash panel?

Good question!

Ryan Hubbard · 08-13-2008, 11:25 AM

Quote:

Originally Posted by Shane

did you ever do any design work to allow for the gages to be mounted BEHIND the dash panel?

No, I have not worked on that. As far as I have seen the aftermarket gauges mount from the front. Also right now I do not have any time to work on that. I would need a set of gauges also to know how to mount them.

SCOTI · 11-18-2008, 05:05 PM

Quote:

Originally Posted by Ryan Hubbard

As far as I have seen the aftermarket gauges mount from the front.

Is there a way to recess them more??

Ryan Hubbard · 11-20-2008, 12:48 AM

I would have to change my tooling and buy thicker billets to make the gauges more recessed. I just went with gauges that did not have the thick rims like the auto meters have. I went with VDO gauges. I am also getting some custom gauges made to sell with the panels. These gauges are only 1 inch in depth all electronic units.

m6z · 11-21-2008, 12:33 PM

Quote:

Originally Posted by Ryan Hubbard

I would have to change my tooling and buy thicker billets to make the gauges more recessed. I just went with gauges that did not have the thick rims like the auto meters have. I went with VDO gauges. I am also getting some custom gauges made to sell with the panels. These gauges are only 1 inch in depth all electronic units.

Any way to get some matching air pressure gauges for the bagged guys. Trying to keep the interior as clean as possible.

ctrow · 11-21-2008, 01:41 PM

I just ordered mine yesterday from Ryan and spoke with him on the phone. I should get them next week. Maybe within the next decade I'll actually get them put in.

I agree that a couple of air guages would be nice for the bagged crowd but I'm sure Ryan doesn't want to have 100 different custom programs for every single request. This based on previous posts and with talking to Ryan on the phone.

Dakota Digital has a single guage that controls all 4 bags I believe. I can't remember the size of it though. Granted it might not match the existing guages but I think it might fit in the center between the Tach/Speedo guages.

Posted a link:

http://www.dakotadigital.com/index.c...rod/prd386.htm

SCOTI · 11-21-2008, 01:59 PM

Quote:

Originally Posted by ctrow

Dakota Digital has a single guage that controls all 4 bags I believe. I can't remember the size of it though. Granted it might not match the existing guages but I think it might fit in the center between the Tach/Speedo guages.

No sense spending the bucks if it's not going to match.

m6z · 11-21-2008, 05:07 PM

Quote:

Originally Posted by ctrow

I just ordered mine yesterday from Ryan and spoke with him on the phone. I should get them next week. Maybe within the next decade I'll actually get them put in.

I agree that a couple of air guages would be nice for the bagged crowd but I'm sure Ryan doesn't want to have 100 different custom programs for every single request. This based on previous posts and with talking to Ryan on the phone.

Not looking for any changes to the dash panels. You have your 2 big holes for spedo/tach and then you have your 5 other holes. Temp, oil, fuel, air press & air press.

Just looking for matching gauges.

XXL · 11-21-2008, 09:03 PM

Quote:

Originally Posted by Ryan Hubbard

These gauges are only 1 inch in depth all electronic units.

Since you can park an 18-wheeler behind the dash, what's the value-add of having shallow gauges?

ctrow · 11-21-2008, 09:16 PM

Quote:

Originally Posted by XXL

Since you can park an 18-wheeler behind the dash, what's the value-add of having shallow gauges?

Shallow guages might come in handy if you wanted to mount a 90 degree master cylinder like Kugel components produces under the dash.

XXL · 11-21-2008, 09:27 PM

Quote:

Originally Posted by ctrow

Shallow guages might come in handy if you wanted to mount a 90 degree master cylinder like Kugel components produces under the dash.

I have precisely that under my dash... as well as an 18-wheeler, 3 cases of Crest, and a goat. Plenty of room.

hounddogs! · 11-21-2008, 11:18 PM

Subscribed so Santa can find it.....

2wd73blazer · 11-22-2008, 11:46 AM

Excellent work. I will be ordering one.

**Dieselwrencher** · 11-27-2008, 12:28 AM

Does anyone have any pictures of these in a truck that are polished? These look awesome. Once I get my truck close to being fit for these I will be getting a set.

2wd73blazer · 12-21-2008, 06:08 PM

Anybody got one they want to sell? 2-5" and 5-2 1/16" holes

Ryan Hubbard · 12-22-2008, 12:41 PM

I still have them in stock and ready to go.

Deuce · 01-19-2009, 12:17 AM

Subscribing...........and I sent you a e-mail.

1nice67chevy · 01-25-2009, 04:19 PM

Quote:

Originally Posted by Ryan Hubbard

Here are the final products

wow very nice love em !!!

IvelDesigns · 01-25-2009, 04:36 PM

these look bad ass. I'm also with the group looking for a way to get air bag/tank gauges on there too.

If someone were to find a set of gauges, and gave you the dimensions, what kind of time/cost would you be looking at to move holes around and/or add new ones?

08-12-2008, 05:43 PM	#126
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	Re: For Sale: Billet Aluminum Dash Panels Here's where I'm at with mine right now. I've got more to do though... Attached Images __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

08-12-2008, 05:58 PM	#127
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: For Sale: Billet Aluminum Dash Panels Nice Job on the dash panel. If you run into any issues, please don't hesitate to contact me. As far as a website goes, I am working with another company that makes gauges and we will be putting the dash boards on his website. We are also going to have a set of custom gauges made just for the dash. The website is www.thomaskirkham.com . I have not been able to put up a website of my own because I have doubled the size of my engineering company and hired new employees and am moving into a new building in September. So between training new employees, designing a new building and buying new equipment I have not had any spare time to do a website. I hope to have the dash panels on the website in a couple weeks.

08-12-2008, 06:52 PM	#128
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: For Sale: Billet Aluminum Dash Panels did you ever do any design work to allow for the gages to be mounted BEHIND the dash panel?

08-12-2008, 11:21 PM	#129
NWD02 Registered User Join Date: Oct 2007 Location: Mont Belvieu, Texas Posts: 729	Re: For Sale: Billet Aluminum Dash Panels Awesome! Nice job with the panel and glove box door. What's the price on a set?

08-13-2008, 01:17 AM	#130
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: For Sale: Billet Aluminum Dash Panels I have updated the first post and other posts in here to reflect current pricing. I sell the dash panel for $275.00 and the Glove Box Door for $175.00. This includes UPS ground shipping. You can either contact me at ryan.hubbard@aspencontrols.com or call me at 562-595-7545. Last edited by Ryan Hubbard; 03-16-2009 at 03:04 AM.

08-13-2008, 01:25 AM	#131
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: For Sale: Billet Aluminum Dash Panels Hey Ryan, I sent you payment about an hour ago, thanks again for a great product!

11-20-2008, 12:48 AM	#135
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: For Sale: Billet Aluminum Dash Panels I would have to change my tooling and buy thicker billets to make the gauges more recessed. I just went with gauges that did not have the thick rims like the auto meters have. I went with VDO gauges. I am also getting some custom gauges made to sell with the panels. These gauges are only 1 inch in depth all electronic units.

11-21-2008, 01:41 PM	#137
ctrow New Member Join Date: May 2007 Location: OKC Posts: 204	Re: For Sale: Billet Aluminum Dash Panels I just ordered mine yesterday from Ryan and spoke with him on the phone. I should get them next week. Maybe within the next decade I'll actually get them put in. I agree that a couple of air guages would be nice for the bagged crowd but I'm sure Ryan doesn't want to have 100 different custom programs for every single request. This based on previous posts and with talking to Ryan on the phone. Dakota Digital has a single guage that controls all 4 bags I believe. I can't remember the size of it though. Granted it might not match the existing guages but I think it might fit in the center between the Tach/Speedo guages. Posted a link: http://www.dakotadigital.com/index.c...rod/prd386.htm Last edited by ctrow; 11-21-2008 at 01:58 PM.

11-21-2008, 11:18 PM	#143
hounddogs! Restoring it $200 at a time... Join Date: Aug 2008 Location: NE Kansas Posts: 886	Re: For Sale: Billet Aluminum Dash Panels Subscribed so Santa can find it..... __________________ Charter member of the 'Put the dimmer switch back on the damn floor where it belongs' Society '68 5.3L-4 speed LWB C20; grandpa bought it for the farm in '71. Now LS 5.3, rather than 327. DD '09 Pilot Weekender '65 Skylark 300-4V-4 speed Wife's '07 Lexus ES350; 117 actuator motors and I can't see the engine. Son's '04 F250 SuperCab 6.0

11-22-2008, 11:46 AM	#144
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: For Sale: Billet Aluminum Dash Panels Excellent work. I will be ordering one.

11-27-2008, 12:28 AM	#145
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: For Sale: Billet Aluminum Dash Panels Does anyone have any pictures of these in a truck that are polished? These look awesome. Once I get my truck close to being fit for these I will be getting a set.

12-21-2008, 06:08 PM	#146
2wd73blazer Registered User Join Date: Jan 2008 Location: North Augusta,SC Posts: 801	Re: For Sale: Billet Aluminum Dash Panels Anybody got one they want to sell? 2-5" and 5-2 1/16" holes

12-22-2008, 12:41 PM	#147
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: For Sale: Billet Aluminum Dash Panels I still have them in stock and ready to go.

01-19-2009, 12:17 AM	#148
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Re: For Sale: Billet Aluminum Dash Panels Subscribing...........and I sent you a e-mail. __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

01-25-2009, 04:36 PM	#150
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: For Sale: Billet Aluminum Dash Panels these look bad ass. I'm also with the group looking for a way to get air bag/tank gauges on there too. If someone were to find a set of gauges, and gave you the dimensions, what kind of time/cost would you be looking at to move holes around and/or add new ones? __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.