My new build thread: Stage 4! - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

swyfor5 · 06-23-2010, 05:30 AM

Got a little done last night. Rattle canned black the front/shroud area, so it's nice and clean before I put the grille and etc back in.

litebulblsc · 06-23-2010, 11:27 AM

I really want to see how the 1 ton swap goes for you. I am happy that you decided not to do it all at once.

swyfor5 · 06-23-2010, 07:30 PM

thank's, need to gather up more parts before I start the swap. Need frt and rear driveshafts, brake upgrades, steering setup, etc. Gotta do the rear axle shackle flip, mount up frt and rear bumpers, winch, wow!

litebulblsc · 06-23-2010, 07:38 PM

Sounds like a lot. Wish I could come help.

swyfor5 · 06-24-2010, 11:06 PM

Got a little crazy with the black rattle cans, and painted up all of the lower stuff! Also got some real nice "B" pillar panels from Wes today, they are sweet! Pic's tommorrow!

swyfor5 · 06-25-2010, 07:57 PM

I know I have asked this question many times before, but here I go again. Swapping in frt and rear 1 ton axles and want to upgrade to a 1 ton brake setup. I am always looking for the simple solution here, and have not found it yet. Any help here, Pic's, threads, etc, guy's? Getting close to setting up the rear disc conversion on my 14 bolt corp, and want to start working on the entire brake setup purchase.

**Yukon Jack** · 06-25-2010, 11:42 PM

I swapped in a Dana 60 in my 69 K20 earlier this year - here is a link to my thread that should give you some good info.

swyfor5 · 06-26-2010, 09:44 PM

Hey YJ, thank's. Just rolled thru, good stuff! Thank's, Bryan.

swyfor5 · 06-27-2010, 09:52 PM

Rolling thru this day, going to make up for it this week!

swyfor5 · 06-29-2010, 04:35 PM

Just got my last shipment of disc brake conversion parts for the 14 bolt rear axle. Looks real good, Blackbird Customs. Rotors, calipers, pads, brackets, spacers, short brake hoses, bolts, brake hose clips, and even a couple of custom weld on hose brackets! Took some pic's and will post up later. Big step here for me. Still need u-bolts for the rear swap, and of course shock setup, but getting closer everyday!

**Yukon Jack** · 06-30-2010, 09:32 AM

Cool, looking forward to the pics of the disc conversion parts.

swyfor5 · 06-30-2010, 09:39 PM

Thank's YJ! Sorting thru some issues on this disc kit, might take a while to figure it out!

swyfor5 · 07-02-2010, 09:02 PM

Going to a Mud Run in Luther Mi. tommorrow, should be fun. I'll take some pic's for ya! I always take my 35mm, but harder to post on the computer. I still love the hard pic's though! Nothing done on the K5, working on sorting out details of the rear disc conversion kit. More later.

swyfor5 · 07-03-2010, 10:28 PM

Here's some pics! Fun today!

swyfor5 · 07-04-2010, 04:29 PM

Name: Mudrun at Flynn's 028.jpg
Views: 1491
Size: 53.5 KB

Name: Mudrun at Flynn's 014.jpg
Views: 1539
Size: 48.8 KB

Name: Mudrun at Flynn's 033.jpg
Views: 1479
Size: 52.8 KB

Name: Mudrun at Flynn's 029.jpg
Views: 1493
Size: 33.5 KB

Name: Mudrun at Flynn's 022.jpg
Views: 1487
Size: 34.5 KB

More pic's of yesterday's slinging!

VA72C10 · 07-04-2010, 04:34 PM

Cool pics. thanks for sharing....now....

where are these pics.....

Quote:

Originally Posted by swyfor5

Got a little done last night. Rattle canned black the front/shroud area, so it's nice and clean before I put the grille and etc back in.

Quote:

Originally Posted by swyfor5

Got a little crazy with the black rattle cans, and painted up all of the lower stuff! Also got some real nice "B" pillar panels from Wes today, they are sweet! Pic's tommorrow!

swyfor5 · 07-04-2010, 05:13 PM

Got em right here! Name: more k5 pictures 015.jpg
Views: 1483
Size: 59.7 KB

Name: more k5 pictures 016.jpg
Views: 1476
Size: 49.3 KB

Name: more k5 pictures 017.jpg
Views: 1482
Size: 49.1 KB

Name: more k5 pictures 018.jpg
Views: 1486
Size: 47.6 KB

Name: more k5 pictures 019.jpg
Views: 1476
Size: 64.4 KB

swyfor5 · 07-04-2010, 05:16 PM

Got a couple more! Name: more k5 pictures 020.jpg
Views: 1522
Size: 54.7 KB

Name: more k5 pictures 021.jpg
Views: 1512
Size: 64.9 KB

VA72C10 · 07-04-2010, 05:22 PM

cool. A little paint really cleans things up!

swyfor5 · 07-05-2010, 12:17 PM

Crawled under yesterday and removed the frt and rear axle trusses/skid plates. Gonna clean em up good and spray a fresh coat of paint. Then off to the F/S pile.

swyfor5 · 07-07-2010, 06:56 PM

Got em painted, look good, post up some pic's asap!

swyfor5 · 07-08-2010, 11:37 PM

Name: axle trusses 001.jpg
Views: 1409
Size: 52.1 KB

Name: axle trusses 002.jpg
Views: 1411
Size: 64.2 KB

Name: axle trusses 003.jpg
Views: 1401
Size: 69.2 KB

Name: axle trusses 004.jpg
Views: 1357
Size: 71.1 KB

Name: axle trusses 005.jpg
Views: 1404
Size: 66.2 KB

Nothing new, just some pic's!

swyfor5 · 07-08-2010, 11:47 PM

Even more after paint! Name: axle trusses 012.jpg
Views: 1392
Size: 81.4 KB

Name: axle trusses 013.jpg
Views: 1392
Size: 91.4 KB

Name: axle trusses 014.jpg
Views: 1395
Size: 61.8 KB

Name: axle trusses 015.jpg
Views: 1389
Size: 65.7 KB

Name: axle trusses 017.jpg
Views: 1388
Size: 65.6 KB

swyfor5 · 07-09-2010, 08:07 PM

Man, I've been way busy with the pic's, anybody else working on this type of project? Help me out here, have to work tomm, but could use some encouragement here! Kinda at a stalemate, have to pay off stuff before new stuff can be ordered! Back to why I'm working tommorrow!

drunkbus · 07-10-2010, 01:25 PM

Quote:

Originally Posted by swyfor5

Man, I've been way busy with the pic's, anybody else working on this type of project? Help me out here, have to work tomm, but could use some encouragement here! Kinda at a stalemate, have to pay off stuff before new stuff can be ordered! Back to why I'm working tommorrow!

Here's some photos of my 1 ton swap progress for you. So far all new bearings and brakes front and rear and rebuilt kingpins and a lot of cleaning and painting and new shock mounts for the rear. Getting close to putting it all in, just waiting for a few last parts.

06-23-2010, 05:30 AM	#126
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: My new build thread: Stage 4! Got a little done last night. Rattle canned black the front/shroud area, so it's nice and clean before I put the grille and etc back in.

06-23-2010, 11:27 AM	#127
litebulblsc Registered User Join Date: Aug 2006 Location: LaSalle Mi Posts: 520	Re: My new build thread: Stage 4! I really want to see how the 1 ton swap goes for you. I am happy that you decided not to do it all at once.

06-23-2010, 07:30 PM	#128
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: My new build thread: Stage 4! thank's, need to gather up more parts before I start the swap. Need frt and rear driveshafts, brake upgrades, steering setup, etc. Gotta do the rear axle shackle flip, mount up frt and rear bumpers, winch, wow!

06-23-2010, 07:38 PM	#129
litebulblsc Registered User Join Date: Aug 2006 Location: LaSalle Mi Posts: 520	Re: My new build thread: Stage 4! Sounds like a lot. Wish I could come help.

06-24-2010, 11:06 PM	#130
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: My new build thread: Stage 4! Got a little crazy with the black rattle cans, and painted up all of the lower stuff! Also got some real nice "B" pillar panels from Wes today, they are sweet! Pic's tommorrow!

06-25-2010, 07:57 PM	#131
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: My new build thread: Stage 4! I know I have asked this question many times before, but here I go again. Swapping in frt and rear 1 ton axles and want to upgrade to a 1 ton brake setup. I am always looking for the simple solution here, and have not found it yet. Any help here, Pic's, threads, etc, guy's? Getting close to setting up the rear disc conversion on my 14 bolt corp, and want to start working on the entire brake setup purchase.

06-25-2010, 11:42 PM	#132
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Re: My new build thread: Stage 4! I swapped in a Dana 60 in my 69 K20 earlier this year - here is a link to my thread that should give you some good info. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

06-26-2010, 09:44 PM	#133
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: My new build thread: Stage 4! Hey YJ, thank's. Just rolled thru, good stuff! Thank's, Bryan.

06-27-2010, 09:52 PM	#134
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: My new build thread: Stage 4! Rolling thru this day, going to make up for it this week!

06-29-2010, 04:35 PM	#135
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: My new build thread: Stage 4! Just got my last shipment of disc brake conversion parts for the 14 bolt rear axle. Looks real good, Blackbird Customs. Rotors, calipers, pads, brackets, spacers, short brake hoses, bolts, brake hose clips, and even a couple of custom weld on hose brackets! Took some pic's and will post up later. Big step here for me. Still need u-bolts for the rear swap, and of course shock setup, but getting closer everyday!

06-30-2010, 09:32 AM	#136
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Re: My new build thread: Stage 4! Cool, looking forward to the pics of the disc conversion parts. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

06-30-2010, 09:39 PM	#137
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: My new build thread: Stage 4! Thank's YJ! Sorting thru some issues on this disc kit, might take a while to figure it out!

07-02-2010, 09:02 PM	#138
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: My new build thread: Stage 4! Going to a Mud Run in Luther Mi. tommorrow, should be fun. I'll take some pic's for ya! I always take my 35mm, but harder to post on the computer. I still love the hard pic's though! Nothing done on the K5, working on sorting out details of the rear disc conversion kit. More later.

07-03-2010, 10:28 PM	#139
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: My new build thread: Stage 4! Here's some pics! Fun today! Attached Images

07-04-2010, 04:29 PM	#140
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: My new build thread: Stage 4! More pic's of yesterday's slinging!



Register or Log In To remove these advertisements.

07-04-2010, 05:13 PM	#142
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: My new build thread: Stage 4! Got em right here!

07-04-2010, 05:16 PM	#143
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: My new build thread: Stage 4! Got a couple more!

07-04-2010, 05:22 PM	#144
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: My new build thread: Stage 4! cool. A little paint really cleans things up! __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-05-2010, 12:17 PM	#145
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: My new build thread: Stage 4! Crawled under yesterday and removed the frt and rear axle trusses/skid plates. Gonna clean em up good and spray a fresh coat of paint. Then off to the F/S pile.

07-07-2010, 06:56 PM	#146
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: My new build thread: Stage 4! Got em painted, look good, post up some pic's asap!

07-08-2010, 11:37 PM	#147
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: My new build thread: Stage 4! Nothing new, just some pic's!

07-08-2010, 11:47 PM	#148
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: My new build thread: Stage 4! Even more after paint!

07-09-2010, 08:07 PM	#149
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: My new build thread: Stage 4! Man, I've been way busy with the pic's, anybody else working on this type of project? Help me out here, have to work tomm, but could use some encouragement here! Kinda at a stalemate, have to pay off stuff before new stuff can be ordered! Back to why I'm working tommorrow!

Register or Log In To remove these advertisements.