My 1962 C10 Build Thread "Grandpa's Truck " - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Bugeyev8** · 06-23-2011, 07:02 PM

big difference in this and what I started with

**Bugeyev8** · 06-23-2011, 07:04 PM

more

collins10672 · 06-24-2011, 02:33 AM

looking good.i know what you have went through doing this cab sheet metal work i restored a 66 truck back in 1994 and most of the repair panels were not available then and had to be made from scratch including the inner rocker panels.looks like you have done a fine job.

**Bugeyev8** · 06-24-2011, 10:31 AM

Quote:

Originally Posted by collins10672

looking good.i know what you have went through doing this cab sheet metal work i restored a 66 truck back in 1994 and most of the repair panels were not available then and had to be made from scratch including the inner rocker panels.looks like you have done a fine job.

That must have been fun, I had to make my own share of patches, I made both inner rockers and the RH floor patch, as well as the corners of the knee knocker cab below the windshield, also made several patches for the hood, Its been a long road..I hope it lasts another 49 years after all this !

**Bugeyev8** · 07-03-2011, 04:00 PM

Got one more door painted inside and the rebushed hinges painted

**Bugeyev8** · 07-03-2011, 04:17 PM

more

**Bugeyev8** · 06-14-2012, 04:47 AM

got the summit headers test fitted...they look ok...kinda cheap and thin flanges, but for 200$ what do u expect ?

**Captainfab** · 06-14-2012, 09:30 PM

Good to see you back

....it's been almost a year.

Do you have a part number for those headers? How far down do they hang underneath?

CRGRS 66 · 06-14-2012, 11:23 PM

Subscribed, went through the first couple pages, very nice workmanship

**Bugeyev8** · 06-15-2012, 12:06 AM

Made a new trans x member today and started on the exhaust system

**Bugeyev8** · 06-15-2012, 12:08 AM

Quote:

Originally Posted by CRGRS 66

Subscribed, went through the first couple pages, very nice workmanship

Thnaks so very much ! I really appriciate it =)

**Bugeyev8** · 06-15-2012, 12:10 AM

Quote:

Originally Posted by Captainfab

Good to see you back

....it's been almost a year.

Do you have a part number for those headers? How far down do they hang underneath?

Yeah went back to work full time and the hiurs are long on top of a long commute, but I had a few days off and got back to the 62 !

The headers are summit long tubes for a 67 camaro , they were 239 $ as I recall, they dont hang too low and for a stock truck like mine plenty of clearance, I can get the part # if you want in a few

**Bugeyev8** · 06-15-2012, 01:15 AM

pics

**Bugeyev8** · 06-15-2012, 01:16 AM

pics 2

**Bugeyev8** · 06-25-2012, 10:49 PM

finished my exhaust tonight, sounds awesome !!

**Bugeyev8** · 06-25-2012, 10:50 PM

tail pipes, 2.50 mandrel bent pipe

**Bugeyev8** · 06-26-2012, 09:26 PM

1962 Chevy New Exhaust - YouTube

**Bugeyev8** · 07-05-2012, 08:42 PM

got my belt set up at the pick n pull.....bastards charge an arm and leg for this stuff now!

I am adding AC and needed to relocate the alt to the other side, got a 90s camaro belt set up

**Bugeyev8** · 09-22-2012, 08:51 PM

Been a while but still working on the 62, been going slow but..the vintage air ac is in and the upper intake is powder costed as well as all accy brackets and pulleys, I get a deal thru work so its better than me cleaning and using a rattle can, cleaning up the engine bay as I go till I blow the body apart and the front clip comes off for paint

**Bugeyev8** · 09-22-2012, 08:56 PM

pics won't load for some reason

**Bugeyev8** · 09-22-2012, 09:48 PM

before, I swapped this engine in when I was 17...I just wanted it to run at that time...engine was hi tech then ! I still like the look of the TPI !

Bomp · 09-24-2012, 08:42 AM

Nice work. subscribed.

**Bugeyev8** · 12-07-2012, 09:52 PM

not much progress...just doing the easy stuff and thats spending money !

bolts and door parts back from plater today !

**slepysal** · 12-08-2012, 02:25 PM

Man Brian great work ! Can I get some more info on your transmission cross member? Also what did you use for your fuel tank?
I appriciate the tips you have posted in your build thred !

**Bugeyev8** · 12-08-2012, 08:45 PM

Quote:

Originally Posted by slepysal

Man Brian great work ! Can I get some more info on your transmission cross member? Also what did you use for your fuel tank?
I appriciate the tips you have posted in your build thred !

The trans x member I made, its 1x3 rectangle and I sleeved for all the bolt holes, my fuel tank is stock behind the seat tank with a return line added for the efi

come see it any time !

06-23-2011, 07:02 PM	#1
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " big difference in this and what I started with Attached Images

06-23-2011, 07:04 PM	#2
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " more Attached Images

06-24-2011, 02:33 AM	#3
collins10672 Registered User Join Date: Jan 2009 Location: bean station tennessee Posts: 398	Re: My 1962 C10 Build Thread "Grandpa's Truck " looking good.i know what you have went through doing this cab sheet metal work i restored a 66 truck back in 1994 and most of the repair panels were not available then and had to be made from scratch including the inner rocker panels.looks like you have done a fine job.

07-03-2011, 04:00 PM	#5
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " Got one more door painted inside and the rebushed hinges painted Attached Images

07-03-2011, 04:17 PM	#6
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " more Attached Images

06-14-2012, 04:47 AM	#7
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " got the summit headers test fitted...they look ok...kinda cheap and thin flanges, but for 200$ what do u expect ? Attached Images

06-14-2012, 09:30 PM	#8
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: My 1962 C10 Build Thread "Grandpa's Truck " Good to see you back ....it's been almost a year. Do you have a part number for those headers? How far down do they hang underneath? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-14-2012, 11:23 PM	#9
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: My 1962 C10 Build Thread "Grandpa's Truck " Subscribed, went through the first couple pages, very nice workmanship __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

06-15-2012, 12:06 AM	#10
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " Made a new trans x member today and started on the exhaust system Last edited by Bugeyev8; 06-15-2012 at 12:11 AM.

06-15-2012, 01:15 AM	#13
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " pics Attached Images

06-15-2012, 01:16 AM	#14
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " pics 2 Attached Images

06-25-2012, 10:49 PM	#15
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " finished my exhaust tonight, sounds awesome !! Attached Images

06-25-2012, 10:50 PM	#16
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " tail pipes, 2.50 mandrel bent pipe Attached Images

07-05-2012, 08:42 PM	#18
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " got my belt set up at the pick n pull.....bastards charge an arm and leg for this stuff now! I am adding AC and needed to relocate the alt to the other side, got a 90s camaro belt set up Attached Images

09-22-2012, 08:51 PM	#19
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " Been a while but still working on the 62, been going slow but..the vintage air ac is in and the upper intake is powder costed as well as all accy brackets and pulleys, I get a deal thru work so its better than me cleaning and using a rattle can, cleaning up the engine bay as I go till I blow the body apart and the front clip comes off for paint



Register or Log In To remove these advertisements.

09-22-2012, 08:56 PM	#20
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " pics won't load for some reason Attached Images Last edited by Bugeyev8; 09-22-2012 at 09:13 PM.

09-22-2012, 09:48 PM	#21
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " before, I swapped this engine in when I was 17...I just wanted it to run at that time...engine was hi tech then ! I still like the look of the TPI ! Attached Images

09-24-2012, 08:42 AM	#22
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: My 1962 C10 Build Thread "Grandpa's Truck " Nice work. subscribed.

12-07-2012, 09:52 PM	#23
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " not much progress...just doing the easy stuff and thats spending money ! bolts and door parts back from plater today ! Attached Images

12-08-2012, 02:25 PM	#24
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: My 1962 C10 Build Thread "Grandpa's Truck " Man Brian great work ! Can I get some more info on your transmission cross member? Also what did you use for your fuel tank? I appriciate the tips you have posted in your build thred ! __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

Register or Log In To remove these advertisements.