Project: Recycle - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 03-03-2010, 12:28 AM

Quote:

Originally Posted by my67chevytruck

SCOTI, we should have spent more time, as yours looks better, but the filler landed to the far right of one of the humps, and as i stated we took the EASY way out. Keith i like that adapter plate, well thought out.

That method is similar to what I was thinking if my initial attempt didn't work out. The only thing different was I figured I would finish out the flat portion between the OE runners w/some steel to match the 45° runner 'sides'.

daverod · 03-10-2010, 10:14 AM

Your the man

Nice work. Looking forward to watching you build.

OARNGESI · 03-10-2010, 10:39 AM

really nice build

SCOTI · 03-18-2010, 11:09 PM

I'm still chipping away but lack pics for proof (broke my camera).

The blazer tank has the original fill line removed & a patch has been welded in place. A new 1.5" fill tube was placed toward the rear of the tank (centered). It's now welded in. I put the bed floor on & w/a 3" piece of Gates fuel line, it all lined up & worked like I hoped. I still need to figure out a ventilation system so the tank can vent during fill & breathe during use so it doesn't pull a vacuum. Thinking about setting up a charcoal canister (ala mid to late 70's GM vehicle) to 'filter' the air/fumes.

I also purchased & welded in the 'studs' for my rear bag hats. Now that that's done, the rear bags are bolted in place.

I received an e-mail confirmation from UPS so I should have some parts on Monday/next week. I'll update again soon after....

aggie91 · 03-19-2010, 04:44 PM

Quote:

Originally Posted by SCOTI

I'm still chipping away but lack pics for proof (broke my camera).

...I'll update again soon after....

Got to get that camera fixed or replaced first!

SCOTI · 03-19-2010, 05:37 PM

Quote:

Originally Posted by aggie91

Got to get that camera fixed or replaced first!

Well, I did take a small cell phone pic for my buddy of the 'new' 1.5" fill tube....

narx66gmc · 03-21-2010, 01:20 PM

this build is great. your attention to detail makes everyone step up their game. great work and keep up the pix.

aggie91 · 03-22-2010, 11:56 AM

Any pictures will do, better than nothing...

I woke up to SNOW Sunday morning here in Longview. It was the second day of SPRING, its not supposed to snow here....It snowed or rained most of the day here...How about where you are?

SCOTI · 03-22-2010, 01:28 PM

Quote:

Originally Posted by aggie91

Any pictures will do, better than nothing...

I woke up to SNOW Sunday morning here in Longview. It was the second day of SPRING, its not supposed to snow here....It snowed or rained most of the day here...How about where you are?

Snowed from about 10pm Sat night until mid-morning on Sunday. I again plowed the roads w/my 74 for the cities of Garland/Rowlett early Sunday morning. It's gone already & expected to hit the 60's this afternoon....

**N2TRUX** · 03-22-2010, 01:38 PM

Quote:

Originally Posted by SCOTI

Snowed from about 10pm Sat night until mid-morning on Sunday.....

We went up on Friday wearing shorts and T-shirts. I meet Scot on Saturday for lunch wearing long sleeves and a jacket. This is what we woke up to on Sunday morning...Brrrrr

aggie91 · 03-22-2010, 05:44 PM

That looks like more then we got. By 11am, most of the snow on the ground was disapearing and the roads never got any coverage. It snowed all thru the day, but the temp was above freezing and nothing really accumulated after about 10am Sunday.

It is currently 66 and should hit 70 tomorrow. Texas weather, if you don't like it, wait around it will change.

thepartsguy · 03-22-2010, 09:44 PM

Montanas kinda the same way, except we only have 2 seasons. Winter, and road construction.

**kev2809** · 03-22-2010, 10:03 PM

any progress?

certified welder? man those welds sure look clean to me...nice skills man

SCOTI · 03-22-2010, 10:15 PM

Quote:

Originally Posted by kev2809

any progress?

certified welder? man those welds sure look clean to me...nice skills man

A certified welder did the gas tank welds for me.

We have a group of contractors working within our company that does alot of our stainless piping (there's a buuuuuuuuunch of stainless piping @ my work as it's a food manufacturing plant). They build all kinds of stuff & several of them are certified for pressure vessels which is why I just had them do it.

I got some parts in today & had to break out the grinder as there was a slight interference when installing. I ran out of daylight (I was working in my driveway tonight) so maybe more progress tomorrow.

I also rummaged through the previously mentioned stainless guys 'scrap' bin. They let me snag a bunch of demo'd piping of which I cut off multiple bends. So far I've accumulated 8x 90° 2.5" mandrel stainless bends. Looks like I'll be doing a stainless exhaust if I can scrounge enough pieces....

SCOTI · 03-25-2010, 12:07 AM

Still no camera. Not much progress either, but a little progress is better than none.....

Frizzle Fry · 03-25-2010, 05:22 AM

That's how I've decided to roll my 64. Some OG caps on steelies. Those caps are getting expen$$$ive though. Nice choice! What are the wheels from? 5x5-lug right?

my67chevytruck · 03-25-2010, 07:34 AM

looking good Scoti, nice choice on the rims/caps

SCOTI · 03-25-2010, 09:41 AM

Quote:

Originally Posted by Frizzle Fry

That's how I've decided to roll my 64. Some OG caps on steelies. Those caps are getting expen$$$ive though. Nice choice! What are the wheels from? 5x5-lug right?

Yes, 5x5's 6" OE front w/some custom rears....

Quote:

Originally Posted by my67chevytruck

looking good Scoti, nice choice on the rims/caps

Thanks!

Tx Firefighter · 03-25-2010, 10:40 AM

Scoti, did you build the rear wheels like we talked about or did you have them done by a pro ?

SCOTI · 03-25-2010, 10:51 AM

Quote:

Originally Posted by Tx Firefighter

Scoti, did you build the rear wheels like we talked about or did you have them done by a pro ?

Had them done by a 'pro' (that's a whole other thread).

Tx Firefighter · 03-25-2010, 12:56 PM

Quote:

Originally Posted by SCOTI

Had them done by a 'pro' (that's a whole other thread).

Spill it if you can. I have some steelies for my truck that I need widened to 8 inches. If you can steer me away from a bad deal I'd appreciate it.

LOW DOUGH · 03-25-2010, 01:34 PM

nice build SCOTI and nice detail! Love the steelies and caps. It's going to look good.

SCOTI · 03-25-2010, 01:51 PM

Quote:

Originally Posted by Tx Firefighter

Spill it if you can. I have some steelies for my truck that I need widened to 8 inches. If you can steer me away from a bad deal I'd appreciate it.

I will once I get things a little further.

aggie91 · 03-25-2010, 01:59 PM

Quote:

Originally Posted by SCOTI

I will once I get things a little further.

Scoti

Looks like you are doing something similar to what I have in mind. I have a set of 5 of the 6" steelies. I am looking for a "pro" to wided a pair to 10". I will be doing painted caps once I find a good set.

I am also interested in getting steered in the right direction. I know that I can get OEM style wheels from Wheel Vintiques in the 5 on 5 pattern in 10" width, but they are over $100 each BEFORE powder coating and I cannot get the back space that I want.

Keep up the good work...

SCOTI · 03-25-2010, 02:10 PM

Quote:

Originally Posted by aggie91

Scoti

Looks like you are doing something similar to what I have in mind. I have a set of 5 of the 6" steelies. I am looking for a "pro" to wided a pair to 10". I will be doing painted caps once I find a good set.

I am also interested in getting steered in the right direction. I know that I can get OEM style wheels from Wheel Vintiques in the 5 on 5 pattern in 10" width, but they are over $100 each BEFORE powder coating and I cannot get the back space that I want.

Keep up the good work...

Unfortunately, the ones I bought were a little more than $100 each bare steel. Actually, they were alot more.... but, what can ya' do when you gotta' have 'em

.

03-10-2010, 10:14 AM	#127
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Project: Recycle Your the man Nice work. Looking forward to watching you build. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

03-10-2010, 10:39 AM	#128
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Project: Recycle really nice build __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

03-18-2010, 11:09 PM	#129
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,042	Re: Project: Recycle I'm still chipping away but lack pics for proof (broke my camera). The blazer tank has the original fill line removed & a patch has been welded in place. A new 1.5" fill tube was placed toward the rear of the tank (centered). It's now welded in. I put the bed floor on & w/a 3" piece of Gates fuel line, it all lined up & worked like I hoped. I still need to figure out a ventilation system so the tank can vent during fill & breathe during use so it doesn't pull a vacuum. Thinking about setting up a charcoal canister (ala mid to late 70's GM vehicle) to 'filter' the air/fumes. I also purchased & welded in the 'studs' for my rear bag hats. Now that that's done, the rear bags are bolted in place. I received an e-mail confirmation from UPS so I should have some parts on Monday/next week. I'll update again soon after.... __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 03-18-2010 at 11:10 PM.

03-21-2010, 01:20 PM	#132
narx66gmc Registered User Join Date: Sep 2005 Location: Bentonville, AR Posts: 190	Re: Project: Recycle this build is great. your attention to detail makes everyone step up their game. great work and keep up the pix.

03-22-2010, 11:56 AM	#133
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Project: Recycle Any pictures will do, better than nothing... I woke up to SNOW Sunday morning here in Longview. It was the second day of SPRING, its not supposed to snow here....It snowed or rained most of the day here...How about where you are? __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square Last edited by aggie91; 03-22-2010 at 11:56 AM.

03-22-2010, 05:44 PM	#136
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Project: Recycle That looks like more then we got. By 11am, most of the snow on the ground was disapearing and the roads never got any coverage. It snowed all thru the day, but the temp was above freezing and nothing really accumulated after about 10am Sunday. It is currently 66 and should hit 70 tomorrow. Texas weather, if you don't like it, wait around it will change. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

03-22-2010, 09:44 PM	#137
thepartsguy Registered User Join Date: Dec 2009 Location: Kalispell, MT. Posts: 90	Re: Project: Recycle Montanas kinda the same way, except we only have 2 seasons. Winter, and road construction. __________________ 63 C10 65 Chevy Custom Cab w/ Big Back Window 66 C30 72 skylark w/ 454 65 K10 May the bridges I burn light the way....

03-22-2010, 10:03 PM	#138
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: Project: Recycle any progress? certified welder? man those welds sure look clean to me...nice skills man __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

03-25-2010, 12:07 AM	#140
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,042	Re: Project: Recycle Still no camera. Not much progress either, but a little progress is better than none..... Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

03-25-2010, 05:22 AM	#141
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Project: Recycle That's how I've decided to roll my 64. Some OG caps on steelies. Those caps are getting expen$$$ive though. Nice choice! What are the wheels from? 5x5-lug right?

03-25-2010, 07:34 AM	#142
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project: Recycle looking good Scoti, nice choice on the rims/caps __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

03-25-2010, 10:40 AM	#144
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Project: Recycle Scoti, did you build the rear wheels like we talked about or did you have them done by a pro ? __________________ I'm on the Instagram- @Gearhead_Kevin

03-25-2010, 01:34 PM	#147
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Project: Recycle nice build SCOTI and nice detail! Love the steelies and caps. It's going to look good.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.