What parts aren't out there? - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gtomechanic · 02-28-2007, 10:18 PM

Quote:

Originally Posted by Tri-ProAutomotive

Does anyone have a Blazer windshield frame; and how much of the top of it normally needs to be replaced?

I have a decent one ,I would be willing to donate ,if you need one for a pattern. What NJ town are you in? Do you have a shop where I can pickup the parts you already have available?

tallhoedude · 03-05-2007, 04:20 PM

Quote:

Originally Posted by Tri-ProAutomotive

Does anyone have a Blazer windshield frame; and how much of the top of it normally needs to be replaced?

i have a few in rough shape,so far only one decent one.i am in indiana,woudl be willing to help where i can.would LOVE!!! to be able to buy a new steel one.

jb4short · 03-05-2007, 04:50 PM

Quote:

Originally Posted by tallhoedude

i have a few in rough shape,so far only one decent one.i am in indiana,woudl be willing to help where i can.would LOVE!!! to be able to buy a new steel one.

I appreciate the help; hold off for now...someone volunteered a good one- let's see if it makes it here. A pretty pristine cowl came in today and is leaving for Taiwan tonight.

Kudos to Mike Duffy for bringing over a nice '67-'68 grille frame! Thanks Mike!

I may have some pictures for you in the morning....no promises...but requested.

WHO'S GOT A SWB Step or Fleetside truck I can buy for a shop truck? I've got a new crate motor and tranny sitting here looking for a home....not worried about missing body parts. HELP!

**Hart_Rod** · 03-05-2007, 05:19 PM

Quote:

Originally Posted by Tri-ProAutomotive

WHO'S GOT A SWB Step or Fleetside truck I can buy for a shop truck? I've got a new crate motor and tranny sitting here looking for a home....not worried about missing body parts. HELP!

Probably not what you are looking for, but.......

http://67-72chevytrucks.com/vboard/s...d.php?t=220957
http://67-72chevytrucks.com/vboard/c...ct=1318&cat=10

PanelDeland · 02-27-2007, 08:11 PM

The shaved panel woould be for aftermarket air trucks and guys not running factory air whether they run aftermarket or not.
Suburban and blazer bedsides are also in demand.The area around the rear doors on Burb's and panels also rusts out.The cab roof I was thinking of is the complete top from driprail back to the seam.Windsheild surrounds for all models where the steel rusts under the seal.A complete floorpan from rocker to rocker would be nice,rather than piecing one together(if it will fit in the truck that way).
One thing about all of the sheetmetal that has been mentioned,IT HAS TO FIT!!!!!Much of the aftermarket stuff is very good like factory it has to be slightly tweaked,but some of it is so bad you would be better off starting from scratch.

71meangreenc10 · 02-27-2007, 08:18 PM

Suburban rear seat holdown brackets, suburban arm rest brackets, no one is making the windshield wiper pivot arms, air vent rods for the inside, rear suburban door window vents,,hmmm suburban fuel filler necks,,,would love to see some grommets for the 3 speed shift levers.

Smitty

Ram-Man · 02-27-2007, 08:31 PM

Another vote for LWB bedsides.

Draggn66 · 02-27-2007, 11:10 PM

How about a repop of the Dash Bezels but without the holes for the gauges? That way someone could make the holes needed for the gauges they want to use. Also maybe some shims to go between the hinges and the door for those that need to bring the door back a bit but don't want to remove the door to adjust the inner hinge bolts.

IvelDesigns · 02-27-2007, 11:45 PM

Quote:

Originally Posted by Draggn66

How about a repop of the Dash Bezels but without the holes for the gauges? That way someone could make the holes needed for the gauges they want to use. Also maybe some shims to go between the hinges and the door for those that need to bring the door back a bit but don't want to remove the door to adjust the inner hinge bolts.

steel glovebox doors are great for this.

Draggn66 · 02-28-2007, 12:08 AM

Quote:

Originally Posted by IvelDesigns

steel glovebox doors are great for this.

Yes but you could retain the same texture with a repop.

russellmarling · 02-28-2007, 12:12 AM

Big block clutch linkage. Particularly the z-bar. No one makes one and I really need one.

Orange · 02-28-2007, 05:32 PM

Quote:

Originally Posted by Draggn66

How about a repop of the Dash Bezels but without the holes for the gauges? That way someone could make the holes needed for the gauges they want to use.

I made a thread about this about a week ago, and everyone thought I was stupid. Pretty much for the reason posted right below you...

See it here:
http://67-72chevytrucks.com/vboard/s...t=dash+cluster

70c10swb · 02-28-2007, 07:56 PM

I have a couple off the top of my head, i dont know if they have been looked at yet.

Cab mount brackets as well as the bed mount brackets.
With all the talk of the shaved cowl panel, i would like to see the cowel itself. They are always rotted out in the corners and bottoms
windsheild frame

70c10swb · 08-31-2007, 10:39 PM

Quote:

Originally Posted by 70c10swb

I have a couple off the top of my head, i dont know if they have been looked at yet.

Cab mount brackets as well as the bed mount brackets.
With all the talk of the shaved cowl panel, i would like to see the cowel itself. They are always rotted out in the corners and bottoms
windsheild frame

still like my idea

Draggn66 · 02-28-2007, 09:00 PM

Quote:

Originally Posted by Orange

I made a thread about this about a week ago, and everyone thought I was stupid.

Well I for one didn't think you were

Hell that's where I got the idea

Hey here's another idea.....how 'bout a vinyl insert for the ash tray and glove box in black to match the bezel? All I've found is woodgrain and sprayed black vinyl spray on them.

MT1972cheyenne · 02-28-2007, 12:53 AM

72 cheyenne door panel stainless moldings that go around the woodgrain.

ThatOneBlue67 · 02-28-2007, 12:58 AM

I don't know who all has said this, but I could really use a 1967 IGNITION SPACER.

NOT bezel, S-P-A-C-E-R (The ones for 1968-1972 are WRONG for 1967)

Sorry for yelling, but I'm a little tired of reaching under the dash to find my ignition! If you'd like, I completely blue-printed the damn thing on AutoCAD and could send you dimensions, section views, and 3D models of it! Just make me one! (And make it affordable, if you'd be so kind).

truknut · 02-28-2007, 01:33 AM

SWB bed floors, glove box compartments, 67-72 full wheel covers, the factory air box (that changes from floor,vent,defrost),tailgates, anything else that they quit making.

**Bob B.** · 02-28-2007, 05:22 AM

I think a stock cowl would be good. I know they don't rust as bad as some of the other sheetmetal parts, but how many do you see thet have big ugly torn up antenna holes in them? And, if you are looking for small parts to reproduce, how about windshield washer nozzels?

**jaros44sr** · 02-28-2007, 06:29 AM

I can drop off a inner wheel well this week end if you give me a location. Also need part of inner rear bedside to fix problem area around wheelhouse mounting area. J.

jb4short · 02-28-2007, 07:49 AM

Quote:

Originally Posted by jaros44

I can drop off a inner wheel well this week end if you give me a location. Also need part of inner rear bedside to fix problem area around wheelhouse mounting area. J.

Is that inner bedside around the wheel house a common problem area?

**jaros44sr** · 02-28-2007, 08:13 PM

Quote:

Originally Posted by Tri-ProAutomotive

Is that inner bedside around the wheel house a common problem area?

All the trucks I've seen seem to have the same problem, wouldn't take much, just about 1 foot by 3 feet. Mostly flat with a radius bend to match the outside eyebrow arch. Small enuff that it woudn't get damaged in shipping, heck I 'll come pick it up, do you need a distributor in Pa. J.

**special-K** · 02-28-2007, 08:49 AM

A kit that contains correct star rivets,custom ordered matching VIN-plate and title.

**special-K** · 02-28-2007, 11:07 AM

The vents in the cowl cover are the inlet for the vents in the kick panels.I like to enjoy the air when it`s too warm for heat and too nice for a/c.I would never want to eliminate that option,personally.

irelands18 · 02-28-2007, 01:56 PM

I'm with the guys on LWb bed parts, there are so many trucks out there, and no parts!

02-27-2007, 08:11 PM	#5
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: What parts aren't out there? The shaved panel woould be for aftermarket air trucks and guys not running factory air whether they run aftermarket or not. Suburban and blazer bedsides are also in demand.The area around the rear doors on Burb's and panels also rusts out.The cab roof I was thinking of is the complete top from driprail back to the seam.Windsheild surrounds for all models where the steel rusts under the seal.A complete floorpan from rocker to rocker would be nice,rather than piecing one together(if it will fit in the truck that way). One thing about all of the sheetmetal that has been mentioned,IT HAS TO FIT!!!!!Much of the aftermarket stuff is very good like factory it has to be slightly tweaked,but some of it is so bad you would be better off starting from scratch. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

02-27-2007, 08:18 PM	#6
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: What parts aren't out there? Suburban rear seat holdown brackets, suburban arm rest brackets, no one is making the windshield wiper pivot arms, air vent rods for the inside, rear suburban door window vents,,hmmm suburban fuel filler necks,,,would love to see some grommets for the 3 speed shift levers. Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

02-27-2007, 08:31 PM	#7
Ram-Man Senior Member Join Date: Aug 2006 Location: Minnesota Posts: 943	Re: What parts aren't out there? Another vote for LWB bedsides.

02-27-2007, 11:10 PM	#8
Draggn66 Wrenchin & Sandin!!! Join Date: Aug 2006 Location: Joliet, IL. Posts: 523	Re: What parts aren't out there? How about a repop of the Dash Bezels but without the holes for the gauges? That way someone could make the holes needed for the gauges they want to use. Also maybe some shims to go between the hinges and the door for those that need to bring the door back a bit but don't want to remove the door to adjust the inner hinge bolts. __________________ Randy Shorewood, IL. My Favorite eBay Searches My Driver Restore Thread 1971 C10 Longbed 2005 Silverado Shortbed 2005 FXDWG Last edited by Draggn66; 02-27-2007 at 11:34 PM.

02-28-2007, 12:12 AM	#11
russellmarling Registered User Join Date: Jan 2006 Location: Highlands, NC Posts: 138	Re: What parts aren't out there? Big block clutch linkage. Particularly the z-bar. No one makes one and I really need one. __________________ '70 GMC SWB step-side- 454, 4 speed, air bags (in progress) '09 CTS-V M6 '03 Sierra SWB Z71 '82 Yamaha Seca XJ650R Turbo! '04 Yamaha FZ6

02-28-2007, 07:56 PM	#13
70c10swb no brain no headache Join Date: Jan 2005 Location: Cape Cod MA Posts: 567	Re: What parts aren't out there? I have a couple off the top of my head, i dont know if they have been looked at yet. Cab mount brackets as well as the bed mount brackets. With all the talk of the shaved cowl panel, i would like to see the cowel itself. They are always rotted out in the corners and bottoms windsheild frame __________________ 1996 GMC Sierra z71 1970 SWB 2wd (project)

02-28-2007, 12:53 AM	#16
MT1972cheyenne Registered User Join Date: Dec 2006 Location: Montana Posts: 223	Re: What parts aren't out there? 72 cheyenne door panel stainless moldings that go around the woodgrain.

02-28-2007, 12:58 AM	#17
ThatOneBlue67 I survived Dead Man's Curve. Join Date: Apr 2006 Location: The Nine-Five-687 Posts: 389	Re: What parts aren't out there? I don't know who all has said this, but I could really use a 1967 IGNITION SPACER. NOT bezel, S-P-A-C-E-R (The ones for 1968-1972 are WRONG for 1967) Sorry for yelling, but I'm a little tired of reaching under the dash to find my ignition! If you'd like, I completely blue-printed the damn thing on AutoCAD and could send you dimensions, section views, and 3D models of it! Just make me one! (And make it affordable, if you'd be so kind). __________________ "The people should not be afraid of their government. The government should be afraid of it's people." "The Hurricane" 1967 Chevrolet C10 350 Eight Cylinder, 700R4 BowtieOverdrive *Cherry Bomb...* Disturbing the Peace Since 1968. Last edited by ThatOneBlue67; 02-28-2007 at 12:59 AM. Reason: Addition.

02-28-2007, 01:33 AM	#18
truknut Registered User Join Date: Oct 2005 Location: Florence, AL (NW Alabama) Posts: 309	Re: What parts aren't out there? SWB bed floors, glove box compartments, 67-72 full wheel covers, the factory air box (that changes from floor,vent,defrost),tailgates, anything else that they quit making. Last edited by truknut; 02-28-2007 at 01:34 AM. Reason: spelled wrong

02-28-2007, 05:22 AM	#19
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,348	Re: What parts aren't out there? I think a stock cowl would be good. I know they don't rust as bad as some of the other sheetmetal parts, but how many do you see thet have big ugly torn up antenna holes in them? And, if you are looking for small parts to reproduce, how about windshield washer nozzels? __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.

02-28-2007, 06:29 AM	#20
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,694	Re: What parts aren't out there? I can drop off a inner wheel well this week end if you give me a location. Also need part of inner rear bedside to fix problem area around wheelhouse mounting area. J. __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

02-28-2007, 08:49 AM	#23
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: What parts aren't out there? A kit that contains correct star rivets,custom ordered matching VIN-plate and title. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 02-28-2007 at 11:03 AM.

02-28-2007, 11:07 AM	#24
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: What parts aren't out there? The vents in the cowl cover are the inlet for the vents in the kick panels.I like to enjoy the air when it`s too warm for heat and too nice for a/c.I would never want to eliminate that option,personally. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-28-2007, 01:56 PM	#25
irelands18 Registered User Join Date: Feb 2007 Location: Chesterland, Ohio Posts: 12	Re: What parts aren't out there? I'm with the guys on LWb bed parts, there are so many trucks out there, and no parts! __________________ Everyone should drive a CHEVY, but if they did..... My dog would have nothing to lift his leg by and piss on!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.