72 Suburban Started - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jc70chevy · 03-10-2013, 02:01 PM

great build

Bud1300 · 03-14-2013, 01:59 PM

Update: I have the axel and trailing arms out, cleaned and painted them last weekend and the blocks and u-bolts are in as well as the trailing arm bushing. I will install them in a couple of weeks when I get back from Las Vega. Leaving tomorrow on a company trip 1st time every going. Anyone from the area that can give any suggestions of what I need to visit while there please let me know.

Bud1300 · 04-08-2013, 02:52 PM

Rear notch is in and painted, rearend, trailing arm, 2" blocks new u-bolts and air bags are installed, so today I order some parts today to get the Fatty Natty on the road.

1 VIAIR 480 COMPRESSOR
5 GALLON BLACK 8 PORT TANK WITH 1/2" PORTS
4 SMC 1/2” VALVES
4 SMC 3/8” VALVES
AVS 7 SWITCH BOX (YOU CHOOSE COLOR)
165/200 PRESSURE SWITCH
VIAIR HIGH AMP RELAY
2 DUAL NEEDLE AIRLIFT 200 PSI GAUGES
1 SINGLE NEEDLE AIRLIFT 200 PSI GAUGE
50’ OF SMC 1/2" DOT AIRLINE
50’ OF SMC 1/4" DOT AIRLINE
1/2 type K copper
3/8 type K copper
Brass fittings
Both front fenders
Front bumper
Battery box
Complete SS fuel line
Complete SS brake lines
Carrier Bearing
3- drive staft u-joints
Complete Steel (in frame) gas tank
Core support with Hardware

I will be 2nd 5 gallon air tank and compressor as soon as I get it driveable.

More Photos coming soon.

**kev2809** · 04-08-2013, 03:41 PM

nice parts list!

whar are you using for the rear floor and tubs?
Posted via Mobile Device

bcubed · 04-08-2013, 03:49 PM

Not sure, we are going to build a new floor .. raised if necessary .. the intent is to hide everything under it but still make it accessible.

bcubed · 04-08-2013, 03:51 PM

Here's the latest picture (with the old sheetmetal)

**kev2809** · 04-08-2013, 04:27 PM

looks good laid out!! what are you going to do with the stock rear fuel line to the gas tank? im trying to address some issues with all the stock hosing and stuff back there before i take it around the block.

you can see in post 120 pic #2, it ends up going to the middle of the axle. is it going to stay like that, or are you going to bend it around the notch? trying to figure out some ideas because im working on that now...

Bud1300 · 04-09-2013, 03:00 PM

I ordered the 2 piece SS fuel lines kit but I will have to cut it off and use A.N fitting and ss braided fuel line to the tank not real sure untill I reach that point, I am thinking about building the floor from 3/4 angle with raised floor and 1/2 hard wood flooring for the rear floor but 100% sure yet. I have a lot of ideas but no fixed plan...

made2drag · 04-09-2013, 05:14 PM

guys, there is a show at the montgomery riverfront on saturday...it's the 1st annual show so not sure how big it will be.

http://www.montgomerystreetrods.com/

and you probably know about these. http://www.montgomerystreetrods.com/...ing_events.php

.

Bud1300 · 04-10-2013, 11:54 AM

Quote:

Originally Posted by made2drag

guys, there is a show at the montgomery riverfront on saturday...it's the 1st annual show so not sure how big it will be.

http://www.montgomerystreetrods.com/

and you probably know about these. http://www.montgomerystreetrods.com/...ing_events.php

.

It is from 3 till 6 and then they will have the 2nd Saturday event, 80,s cover band till 10pm, 6 local car clubs are working on getting vehicle there. I was thinking about going but I will have to load the Camaro on the trailer Its not real streetable due to 411s on 15 x 12 x 27" tires and a large stall 3500 rms at 55 mph..

made2drag · 04-11-2013, 03:50 PM

Quote:

Originally Posted by Bud1300

It is from 3 till 6 and then they will have the 2nd Saturday event, 80,s cover band till 10pm, 6 local car clubs are working on getting vehicle there. I was thinking about going but I will have to load the Camaro on the trailer Its not real streetable due to 411s on 15 x 12 x 27" tires and a large stall 3500 rms at 55 mph..

if it's from 3-6p looks like i wont be going. my daughter has a softball game in eclectic at 3.

Bud1300 · 04-12-2013, 03:57 PM

I will post some photos of the show.

**kev2809** · 04-09-2013, 09:15 PM

too far from texas made2drag..

i just ordered that same brake kit but in oem..i think i will leave it going across the axle like this, then mount it to a tab i will weld to the stock brake tab on the axle...not pretty by any means but it should be functional and covered up by the floor.

**kev2809** · 04-09-2013, 09:53 PM

Scratch that...im gonna bend it along the notch and attach another bent up line around the rest of the notch and connect the 2 with a very small hose...then connect the hose from the tank to end of the line. Dumb idea above....lol
Posted via Mobile Device

jmedero · 04-12-2013, 11:29 PM

Nice work man. Looking good.
Posted via Mobile Device

Bud1300 · 04-15-2013, 12:27 PM

Riverfront was a good show about 100 cars / trucks attended, this was the 1st show the City of Montgomery has put on the Camaro won top 25. Ran into another member (Madetodrag) at the show and Bcubed will need to post photos of the event.

bcubed · 04-16-2013, 01:26 PM

Here's the link to the show this weekend

https://www.facebook.com/media/set/?...1&l=22306aa669

made2drag · 05-02-2013, 07:44 PM

ya'll going to the monthly gold star show on sunday? we started a little club and plan to be there around 2p...

Bud1300 · 05-22-2013, 05:20 PM

Updateed Photo

*project 67 sub* · 05-23-2013, 10:23 PM

looking good

**kev2809** · 05-23-2013, 10:40 PM

I like!
Posted via Mobile Device

made2drag · 05-29-2013, 11:41 AM

love the grill...that thing is looking mean!

fastnlow · 06-03-2013, 06:33 PM

looking good man

bondo510 · 08-20-2013, 09:38 AM

What are you going to do one the drivers side where the rust is in front of the rear wheel?

Bud1300 · 10-29-2013, 03:46 PM

Inter structure is not too bad, just going to cut out the cancer and I have a truck panel that I am going to cut up and use. It is not the same but I will make the needed changes to make it work. I have been ordering parts and next month I will get back started on the build.

03-10-2013, 02:01 PM	#1
jc70chevy Registered User Join Date: Jul 2012 Location: vallejo,ca Posts: 176	Re: 72 Suburban Started great build

04-08-2013, 02:52 PM	#3
Bud1300 Registered User Join Date: May 2006 Location: Elmore Posts: 108	Re: 72 Suburban Started Rear notch is in and painted, rearend, trailing arm, 2" blocks new u-bolts and air bags are installed, so today I order some parts today to get the Fatty Natty on the road. 1 VIAIR 480 COMPRESSOR 5 GALLON BLACK 8 PORT TANK WITH 1/2" PORTS 4 SMC 1/2” VALVES 4 SMC 3/8” VALVES AVS 7 SWITCH BOX (YOU CHOOSE COLOR) 165/200 PRESSURE SWITCH VIAIR HIGH AMP RELAY 2 DUAL NEEDLE AIRLIFT 200 PSI GAUGES 1 SINGLE NEEDLE AIRLIFT 200 PSI GAUGE 50’ OF SMC 1/2" DOT AIRLINE 50’ OF SMC 1/4" DOT AIRLINE 1/2 type K copper 3/8 type K copper Brass fittings Both front fenders Front bumper Battery box Complete SS fuel line Complete SS brake lines Carrier Bearing 3- drive staft u-joints Complete Steel (in frame) gas tank Core support with Hardware I will be 2nd 5 gallon air tank and compressor as soon as I get it driveable. More Photos coming soon.

04-08-2013, 03:41 PM	#4
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: 72 Suburban Started nice parts list! whar are you using for the rear floor and tubs? Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-08-2013, 03:49 PM	#5
bcubed Registered User Join Date: Nov 2002 Location: Wetumpka, AL Posts: 147	Re: 72 Suburban Started Not sure, we are going to build a new floor .. raised if necessary .. the intent is to hide everything under it but still make it accessible. __________________ Bill 2000 Bagged Silverado 1978 Chevy Malibu 1955 Apache Stepside (someday)

04-08-2013, 03:51 PM	#6
bcubed Registered User Join Date: Nov 2002 Location: Wetumpka, AL Posts: 147	Re: 72 Suburban Started Here's the latest picture (with the old sheetmetal) __________________ Bill 2000 Bagged Silverado 1978 Chevy Malibu 1955 Apache Stepside (someday)

03-14-2013, 01:59 PM	#2
Bud1300 Registered User Join Date: May 2006 Location: Elmore Posts: 108	Re: 72 Suburban Started Update: I have the axel and trailing arms out, cleaned and painted them last weekend and the blocks and u-bolts are in as well as the trailing arm bushing. I will install them in a couple of weeks when I get back from Las Vega. Leaving tomorrow on a company trip 1st time every going. Anyone from the area that can give any suggestions of what I need to visit while there please let me know.

04-08-2013, 04:27 PM	#7
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: 72 Suburban Started looks good laid out!! what are you going to do with the stock rear fuel line to the gas tank? im trying to address some issues with all the stock hosing and stuff back there before i take it around the block. you can see in post 120 pic #2, it ends up going to the middle of the axle. is it going to stay like that, or are you going to bend it around the notch? trying to figure out some ideas because im working on that now... __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-09-2013, 03:00 PM	#8
Bud1300 Registered User Join Date: May 2006 Location: Elmore Posts: 108	Re: 72 Suburban Started I ordered the 2 piece SS fuel lines kit but I will have to cut it off and use A.N fitting and ss braided fuel line to the tank not real sure untill I reach that point, I am thinking about building the floor from 3/4 angle with raised floor and 1/2 hard wood flooring for the rear floor but 100% sure yet. I have a lot of ideas but no fixed plan...

04-09-2013, 05:14 PM	#9
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: 72 Suburban Started guys, there is a show at the montgomery riverfront on saturday...it's the 1st annual show so not sure how big it will be. http://www.montgomerystreetrods.com/ and you probably know about these. http://www.montgomerystreetrods.com/...ing_events.php . __________________ my 86 c10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=496829 my 56 3100 build: http://67-72chevytrucks.com/vboard/s...09#post5712509 my 95 silverado build: http://67-72chevytrucks.com/vboard/s...35#post5879335 my gray 86 c10 http://67-72chevytrucks.com/vboard/s...34#post7624734

04-12-2013, 03:57 PM	#12
Bud1300 Registered User Join Date: May 2006 Location: Elmore Posts: 108	Re: 72 Suburban Started I will post some photos of the show.

04-09-2013, 09:15 PM	#13
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: 72 Suburban Started too far from texas made2drag.. i just ordered that same brake kit but in oem..i think i will leave it going across the axle like this, then mount it to a tab i will weld to the stock brake tab on the axle...not pretty by any means but it should be functional and covered up by the floor. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-09-2013, 09:53 PM	#14
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: 72 Suburban Started Scratch that...im gonna bend it along the notch and attach another bent up line around the rest of the notch and connect the 2 with a very small hose...then connect the hose from the tank to end of the line. Dumb idea above....lol Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

04-12-2013, 11:29 PM	#15
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 72 Suburban Started Nice work man. Looking good. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

04-15-2013, 12:27 PM	#16
Bud1300 Registered User Join Date: May 2006 Location: Elmore Posts: 108	Re: 72 Suburban Started Riverfront was a good show about 100 cars / trucks attended, this was the 1st show the City of Montgomery has put on the Camaro won top 25. Ran into another member (Madetodrag) at the show and Bcubed will need to post photos of the event.

04-16-2013, 01:26 PM	#17
bcubed Registered User Join Date: Nov 2002 Location: Wetumpka, AL Posts: 147	Re: 72 Suburban Started Here's the link to the show this weekend https://www.facebook.com/media/set/?...1&l=22306aa669 __________________ Bill 2000 Bagged Silverado 1978 Chevy Malibu 1955 Apache Stepside (someday)



Register or Log In To remove these advertisements.

05-02-2013, 07:44 PM	#18
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: 72 Suburban Started ya'll going to the monthly gold star show on sunday? we started a little club and plan to be there around 2p... __________________ my 86 c10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=496829 my 56 3100 build: http://67-72chevytrucks.com/vboard/s...09#post5712509 my 95 silverado build: http://67-72chevytrucks.com/vboard/s...35#post5879335 my gray 86 c10 http://67-72chevytrucks.com/vboard/s...34#post7624734

05-22-2013, 05:20 PM	#19
Bud1300 Registered User Join Date: May 2006 Location: Elmore Posts: 108	Re: 72 Suburban Started Updateed Photo

05-23-2013, 10:23 PM	#20
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: 72 Suburban Started looking good

05-23-2013, 10:40 PM	#21
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,172	Re: 72 Suburban Started I like! Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

05-29-2013, 11:41 AM	#22
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: 72 Suburban Started love the grill...that thing is looking mean! __________________ my 86 c10 build: http://67-72chevytrucks.com/vboard/s...d.php?t=496829 my 56 3100 build: http://67-72chevytrucks.com/vboard/s...09#post5712509 my 95 silverado build: http://67-72chevytrucks.com/vboard/s...35#post5879335 my gray 86 c10 http://67-72chevytrucks.com/vboard/s...34#post7624734

06-03-2013, 06:33 PM	#23
fastnlow Registered User Join Date: May 2013 Location: Titus, AL Posts: 15	Re: 72 Suburban Started looking good man __________________ Jim

08-20-2013, 09:38 AM	#24
bondo510 Registered User Join Date: Jun 2011 Location: Sonora CA Posts: 238	Re: 72 Suburban Started What are you going to do one the drivers side where the rust is in front of the rear wheel?

10-29-2013, 03:46 PM	#25
Bud1300 Registered User Join Date: May 2006 Location: Elmore Posts: 108	Re: 72 Suburban Started Inter structure is not too bad, just going to cut out the cancer and I have a truck panel that I am going to cut up and use. It is not the same but I will make the needed changes to make it work. I have been ordering parts and next month I will get back started on the build.

Register or Log In To remove these advertisements.