KS Parting a 72 1/2 with AC and no bed - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Heavy Evy · 09-03-2013, 11:25 PM

Money sent for radio delete plate

brettgp · 09-04-2013, 06:34 PM

Thanks, Randy!

The ignition piece and the metal strip for the heater controls are correct! The heater/AC box looks to me to be the one that goes in the engine compartment. I am looking for the one that goes below the dash inside the cab. Any chance you have that?

I am definitely interested in the two parts, though.

Thanks,
Brett

fine 67 · 09-04-2013, 07:24 PM

hi randy can you give me a price if you want to sell the whole carb with a/c piece thanks mark

teeitup · 09-04-2013, 07:45 PM

Brett, the box is the ac heater core box that goes under the dash behind the glove box

Mark, sorry carb has been sold
Posted via Mobile Device

mvesr · 09-04-2013, 07:50 PM

how much for the AT crossmember shipped to 28704?

Thanks-Mika

teeitup · 09-04-2013, 09:52 PM

Mika, $50 shipped, Thanks Randy

19Chevy67C10 · 09-05-2013, 12:27 AM

Randy,

I got you paid for these already I believe, if not please let me know. I thought I paid using paypal right after you pm'ed me. Either way I still want/need them please let me know.

Thanks,

Kev C.

Quote:

Originally Posted by teeitup

OK guys I got a few parts off this yesterday going back out there in a bit to try to get more

pic for 1967C10

In The Ten Ring · 09-05-2013, 11:24 PM

Do you still have the radiator core support?

teeitup · 09-06-2013, 06:54 AM

In the ten ring, sorry its rusted badly. Thanks Randy

**Oddfire** · 09-06-2013, 07:18 AM

Randy i'm guessing the radiator was no good? Did you ever find me a good power steering pump pressure line? Jamie

teeitup · 09-06-2013, 01:19 PM

Jamie, sorry this radiator was junk. Also sorry no single ps hoses yet. Thanks Randy

In The Ten Ring · 09-06-2013, 03:15 PM

Randy,

Too bad. Thanks for letting me know. The search continues!

Greg

Heavy Evy · 09-10-2013, 12:16 AM

Got my delete plate today and it was intact!! Thanks randy

kmaz · 09-10-2013, 06:11 AM

I'll take the ac compressor brackets. Pm me
Posted via Mobile Device

teeitup · 09-10-2013, 07:20 AM

Evan, THANKS

kmaz, this set is sold, I'll look and see if I have any other sets. I know I have most of a set, I think I'm missing one bracket though

Thanks Randy

kmaz · 09-10-2013, 07:54 AM

OK, thank you. Let me know
Posted via Mobile Device

BlazerTime · 09-10-2013, 02:12 PM

Are these alternator brackets and pulleys the same /correct for a 71 Blazer with Air? If not, do you have these items for that application?

Also, do you have:

The bolt that attaches the two compressor line assembly to the compressor?
An accelerator pedal for a '67 truck, just the inside pedal?
Would you sell a selection of body/fendor/hood bolts?

Prices shipped to 66085?

Thank you.

Jeff
Posted via Mobile Device

teeitup · 09-10-2013, 04:06 PM

Jeff, yes these are the right alt brackets and motor pullies for a 71 with AC and PS. I don't have the AC bolt your talking about. I have a plastic gas pedal off a 67. And yes I'd throw together some bolts for you
$20 for ALt brackets
$35 for pullies
$5 for gas pedal
$10 for bolt selection
$12 shipping
$82 shipped for all
Thanks Randy

teeitup · 09-10-2013, 08:53 PM

kmaz, I have 5 out of the 7 small block AC brackets, missing the intake bracket and short bracket that goes from it to compressor

BlazerTime · 09-10-2013, 11:38 PM

Randy,

I'll take the parts. How do you want to be paid?

Thanks,

Jeff
Posted via Mobile Device

green72s · 09-13-2013, 12:05 AM

Randy,

I received the evaporator assembly, AC hoses, compressor brackets and receiver/dryer hard lines. Thanks you very much, especially for packing all the awkward pieces and customizing a box to fit them, greatly appreciate it.

Peter

teeitup · 09-13-2013, 07:17 AM

Jeff, I'll get them in the mail today

Peter, glad it got there safely, its kind of tough boxing up the firewall boxes, I'm getting better at it.

THANKS and take care, Randy

kmaz · 09-14-2013, 06:47 AM

How much for the 5 ac brackets shipped to 01862?
Posted via Mobile Device

eyes · 09-14-2013, 10:55 AM

Do u have the front crossmember brakes spindle assm. power brake booster yet also the dash? thanks Mike newer member

Pmarti69 · 09-14-2013, 11:21 AM

Looking for the factory door glass for both doors, must be GM. Cost shipped to 77345
Posted via Mobile Device

09-03-2013, 11:25 PM	#126
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: Parting a 72 1/2 with AC and no bed Money sent for radio delete plate __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

09-04-2013, 06:34 PM	#127
brettgp Registered User Join Date: Jul 2012 Location: Atlanta, GA Posts: 9	Re: Parting a 72 1/2 with AC and no bed Thanks, Randy! The ignition piece and the metal strip for the heater controls are correct! The heater/AC box looks to me to be the one that goes in the engine compartment. I am looking for the one that goes below the dash inside the cab. Any chance you have that? I am definitely interested in the two parts, though. Thanks, Brett

09-04-2013, 07:24 PM	#128
fine 67 Junior Member Join Date: Jun 2001 Location: webster,n.y.,usa Posts: 127	Re: Parting a 72 1/2 with AC and no bed hi randy can you give me a price if you want to sell the whole carb with a/c piece thanks mark

09-04-2013, 07:45 PM	#129
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 1/2 with AC and no bed Brett, the box is the ac heater core box that goes under the dash behind the glove box Mark, sorry carb has been sold Posted via Mobile Device __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-04-2013, 07:50 PM	#130
mvesr Registered User Join Date: Sep 2012 Location: Arden NC Posts: 185	Re: Parting a 72 1/2 with AC and no bed how much for the AT crossmember shipped to 28704? Thanks-Mika

09-04-2013, 09:52 PM	#131
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 1/2 with AC and no bed Mika, $50 shipped, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-05-2013, 11:24 PM	#133
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Parting a 72 1/2 with AC and no bed Do you still have the radiator core support?

09-06-2013, 06:54 AM	#134
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 1/2 with AC and no bed In the ten ring, sorry its rusted badly. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2013, 07:18 AM	#135
Oddfire Senior Member Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Parting a 72 1/2 with AC and no bed Randy i'm guessing the radiator was no good? Did you ever find me a good power steering pump pressure line? Jamie

09-06-2013, 01:19 PM	#136
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 1/2 with AC and no bed Jamie, sorry this radiator was junk. Also sorry no single ps hoses yet. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-06-2013, 03:15 PM	#137
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Parting a 72 1/2 with AC and no bed Randy, Too bad. Thanks for letting me know. The search continues! Greg

09-10-2013, 12:16 AM	#138
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: Parting a 72 1/2 with AC and no bed Got my delete plate today and it was intact!! Thanks randy __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

09-10-2013, 06:11 AM	#139
kmaz Registered User Join Date: Sep 2013 Location: Billerica Ma Posts: 16	Re: Parting a 72 1/2 with AC and no bed I'll take the ac compressor brackets. Pm me Posted via Mobile Device

09-10-2013, 07:20 AM	#140
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 1/2 with AC and no bed Evan, THANKS kmaz, this set is sold, I'll look and see if I have any other sets. I know I have most of a set, I think I'm missing one bracket though Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-10-2013, 07:54 AM	#141
kmaz Registered User Join Date: Sep 2013 Location: Billerica Ma Posts: 16	Re: Parting a 72 1/2 with AC and no bed OK, thank you. Let me know Posted via Mobile Device



Register or Log In To remove these advertisements.

09-10-2013, 02:12 PM	#142
BlazerTime Registered User Join Date: Oct 2012 Location: Stilwell, KS Posts: 46	Re: Parting a 72 1/2 with AC and no bed Are these alternator brackets and pulleys the same /correct for a 71 Blazer with Air? If not, do you have these items for that application? Also, do you have: The bolt that attaches the two compressor line assembly to the compressor? An accelerator pedal for a '67 truck, just the inside pedal? Would you sell a selection of body/fendor/hood bolts? Prices shipped to 66085? Thank you. Jeff Posted via Mobile Device

09-10-2013, 04:06 PM	#143
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 1/2 with AC and no bed Jeff, yes these are the right alt brackets and motor pullies for a 71 with AC and PS. I don't have the AC bolt your talking about. I have a plastic gas pedal off a 67. And yes I'd throw together some bolts for you $20 for ALt brackets $35 for pullies $5 for gas pedal $10 for bolt selection $12 shipping $82 shipped for all Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-10-2013, 08:53 PM	#144
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 1/2 with AC and no bed kmaz, I have 5 out of the 7 small block AC brackets, missing the intake bracket and short bracket that goes from it to compressor __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-10-2013, 11:38 PM	#145
BlazerTime Registered User Join Date: Oct 2012 Location: Stilwell, KS Posts: 46	Re: Parting a 72 1/2 with AC and no bed Randy, I'll take the parts. How do you want to be paid? Thanks, Jeff Posted via Mobile Device

09-13-2013, 12:05 AM	#146
green72s Registered User Join Date: Dec 2006 Location: Tempe, Arizona Posts: 100	Re: Parting a 72 1/2 with AC and no bed Randy, I received the evaporator assembly, AC hoses, compressor brackets and receiver/dryer hard lines. Thanks you very much, especially for packing all the awkward pieces and customizing a box to fit them, greatly appreciate it. Peter

09-13-2013, 07:17 AM	#147
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 1/2 with AC and no bed Jeff, I'll get them in the mail today Peter, glad it got there safely, its kind of tough boxing up the firewall boxes, I'm getting better at it. THANKS and take care, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-14-2013, 06:47 AM	#148
kmaz Registered User Join Date: Sep 2013 Location: Billerica Ma Posts: 16	Re: Parting a 72 1/2 with AC and no bed How much for the 5 ac brackets shipped to 01862? Posted via Mobile Device

09-14-2013, 10:55 AM	#149
eyes Registered User Join Date: Sep 2005 Location: Wisconsin Posts: 5	Re: Parting a 72 1/2 with AC and no bed Do u have the front crossmember brakes spindle assm. power brake booster yet also the dash? thanks Mike newer member

09-14-2013, 11:21 AM	#150
Pmarti69 Registered User Join Date: Feb 2012 Location: North of Houston, Tx Posts: 346	Re: Parting a 72 1/2 with AC and no bed Looking for the factory door glass for both doors, must be GM. Cost shipped to 77345 Posted via Mobile Device __________________ Houston Area Lawman 72 GMC Fleetside (AKA: MERLIN) ZZ4 Crate Engine TH400 with Stage two kit

Register or Log In To remove these advertisements.