Mark's 66 Burb Build - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

piratexpress1369a · 11-05-2012, 10:50 AM

Quote:

Originally Posted by Mad Rods

Nice!
Posted via Mobile Device

that looks awesome

**superflysteiny** · 11-05-2012, 02:53 PM

So bad a$$

72BlckButy · 11-07-2012, 04:02 PM

The only way to tow...

Looks amazing!

**67cheby** · 11-07-2012, 04:11 PM

Wow.....amazing !

**youngrodder** · 11-07-2012, 10:54 PM

didn't even notice that you had rims and tires on your trailer. ha ha... I guess that I was too distracted by your awesome rides.

Very nice

Marc

Dinos63 · 11-07-2012, 11:56 PM

well done sir!!looks killer you nailed it!

McMurphy · 11-09-2012, 01:54 PM

Quote:

Originally Posted by toocrazy

This is EXACTLY what the intent behind my current build was, a 66 chevy stepside to tow my 66 pontiac to car shows!
Nicely done !!

Since I started this build though we have picked up a 56 chevy 2ton dump bed that will be converted to a car hauler.
Should be fun times !!

FRENCHBLUE72 · 11-19-2012, 01:25 PM

Nice set up the trailer however needs some classy wheels...

toocrazy · 11-19-2012, 10:14 PM

Quote:

Originally Posted by FRENCHBLUE72

Nice set up the trailer however needs some classy wheels...

I couldnt agree more but at least paint them black!!

As you 66 or older Burb guys know carpet is not to be found for these trucks. I ordered some loop carpet last week and delivered the truck to the upholstery guy who covered my seats. I just couldn't muster the talent to install carpet in this truck "professionally". The nice thing is they sent me carpet made for molding so a heat gun helps to form this carpet over uneven surfaces and the rest is handled by stitching. The back area is banded and will lay loose in the back or attached by velcro. I stopped by today and here is the progress.

I am still hoping to take the Suburban to the Turkey Rod Run at the Daytona Motor Speedway next weekend.

FRENCHBLUE72 · 11-20-2012, 08:34 AM

Flip flops and sunshine I have got to move to florida....

MikeS. · 11-20-2012, 10:17 AM

Quote:

Originally Posted by toocrazy

hey what is the story with 66 suburban rear bumpers? I thought I would replace mine but can't seem to find one.

AFAIK the 63-66 Burb rear bumpers were all the same. The Burb bumpers are different than the p/u and are just a lot harder to find.

Try finding an Al grill for a 63, especially with the bezels and light rings. It's a 1 off. They are there but hard to find nice ones at a decent price.

The silver you used is similar/close to what I plan on painting the top of my '63, like where you painted black. The body will be Ford hot rod blue though.

The satin nickel color on the right.

You have done a fantastic job with your Burb! My hat is definitely off to you and the ppl helping you. The pic of where the Burb is pulling the Malibu is totally killer.
Posted via Mobile Device

MikeS. · 11-20-2012, 10:18 AM

Quote:

Originally Posted by FRENCHBLUE72

Flip flops and sunshine I have got to move to florida....

Hot and humid as Hell 9months outta the year though.
Posted via Mobile Device

LT1 Burb · 11-20-2012, 10:43 AM

Thats killer but gives me an ideal, I was wondering how to get both the suburban and my SWB to a car show, hmmm.

toocrazy · 11-20-2012, 10:44 PM

Quote:

Originally Posted by MikeS.

Hot and humid as Hell 9months outta the year though.
Posted via Mobile Device

November through April is awesome in Sarasota.

Quote:

Originally Posted by LT1 Burb

Thats killer but gives me an ideal, I was wondering how to get both the suburban and my SWB to a car show, hmmm.

and you arrive in style!!

**superflysteiny** · 11-21-2012, 01:43 AM

Really looks great keep it up
Posted via Mobile Device

yawdie1 · 11-28-2012, 11:49 AM

Im sure you heard this before but............. Very nice job!
Been looking for a burb like that but can't find any.

Very cool, very cool!

Lolyin58 · 12-02-2012, 10:13 AM

Looking really good. Great color combo!!

Dinos63 · 12-02-2012, 12:18 PM

very cool!!

**Nobby** · 12-02-2012, 01:21 PM

Burb looks great Mark..Quick question, where did you get your side window rubber? Thanks

toocrazy · 12-02-2012, 11:47 PM

Quote:

Originally Posted by Nobby

Burb looks great Mark..Quick question, where did you get your side window rubber? Thanks

Sorry those were the only window seals I did not replace.

Quote:

Originally Posted by Dinos63

very cool!!

thanks Dino!

Quote:

Originally Posted by Lolyin58

Looking really good. Great color combo!!

I love the silver and satin black.....its just a great hot rod look

Quote:

Originally Posted by yawdie1

Im sure you heard this before but............. Very nice job!
Been looking for a burb like that but can't find any.

Very cool, very cool!

they are out there. we were lucky this truck was in such good shape when I bought it. I really planned on selling this truck when I was done but now my wife wants me to keep it because she likes it. Trust me she could care less about most of my cars.

toocrazy · 12-02-2012, 11:58 PM

As you 66 and older burb guys know there is not any aftermarket molded carpet available for these trucks. I can trim out carpet on flat surfaces but when it comes to the transmission hump and making the carpet look right forget about it. I purchased my automotive loop carpet online and had it shipped in. It did have a rubber backing on it I was told was used to mold carpet.......they heat up the carpet and press it on to a mold. I enlisted the guy who covered my seats to lay my carpet. He used a heat gun to mold the carpet around the transmission hump. He did a little stitching as well to make it fit. I ordered some black binding and as you can see after he cut the carpet he sewed this around the edges. He even ordered the rubber drivers side foot mat and sewed it in so I wouldnt wear out the carpet. The truck is in three pieces but it overlaps nice and looks like a factory job. I am extremely happy and would have never tried to tackle this on my own. I had around $300 in the carpet including shipping and he charged me $400 in labor to do the work.

next job, get some tunes in this truck!!

**clemdaddy** · 12-03-2012, 12:27 AM

just caught up with this build. thats a cool burb and very tastefully done. love all your rides and the place, wow what a cool place you have.

will be following along...

**67cheby** · 12-03-2012, 12:15 PM

Looking killer man !

72BlckButy · 12-03-2012, 02:36 PM

That carpet looks amazing!!!

toocrazy · 12-03-2012, 09:32 PM

Quote:

Originally Posted by clemdaddy

just caught up with this build. thats a cool burb and very tastefully done. love all your rides and the place, wow what a cool place you have.

will be following along...

Quote:

Originally Posted by 67cheby

Looking killer man !

Quote:

Originally Posted by 72BlckButy

That carpet looks amazing!!!

Thanks guys. Once I put the seats back in, vacuum, and tidy up it should look pretty nice. I have always liked nice sound systems in cars but one thing I have realized is they really ad no value to the car. I am going with some Alpine splits in the Burb. I had a few sets sitting around for my C10 project to I am going to install one pair in the Suburban. There are already some nice 6 1/2 two way speakers in the kick panels. I want to mount the Alpines in the back and the more I looked the more I did not want to cut any holes inside the truck. After all of the work I did not want to hack it up so I decided I would build some boxes for the rear speakers. There was a small space on either side of the rear seat so with a little wood and a little leftover carpet this is what I came up with

I am not winning any audio awards with these but they fit pretty good. i am going to build a box later this week and hoping to fit two 12" subs in the back and a good amp to light them up. Good low end will make any mediocre system sound good

11-05-2012, 02:53 PM	#127
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Mark's 66 Burb Build So bad a$$ __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

11-07-2012, 04:02 PM	#128
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Mark's 66 Burb Build The only way to tow... Looks amazing! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

11-07-2012, 04:11 PM	#129
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Mark's 66 Burb Build Wow.....amazing ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-07-2012, 10:54 PM	#130
youngrodder Registered User Join Date: Mar 2007 Location: Scotts, Michigan Posts: 3,773	Re: Mark's 66 Burb Build didn't even notice that you had rims and tires on your trailer. ha ha... I guess that I was too distracted by your awesome rides. Very nice Marc __________________ …………...........__________ .................. ((__\|__\|\|___\____ ..;.;;.:;:;.,;..;((_(O))____ (_(O)) 1948 Chevy Truck - Finished SOLD!! 1953 Chevy Suburban "Family Truckster" Completed: Spring of 2021 http://67-72chevytrucks.com/vboard/s...d.php?t=605484 1994 4x4 Blazer - "Field Find" https://67-72chevytrucks.com/vboard/...ferrerid=30857

11-07-2012, 11:56 PM	#131
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Mark's 66 Burb Build well done sir!!looks killer you nailed it! __________________ CHEVY ONLY... Nothin Else !

11-19-2012, 01:25 PM	#133
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Mark's 66 Burb Build Nice set up the trailer however needs some classy wheels... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-20-2012, 08:34 AM	#135
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Mark's 66 Burb Build Flip flops and sunshine I have got to move to florida.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-20-2012, 10:43 AM	#138
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: Mark's 66 Burb Build Thats killer but gives me an ideal, I was wondering how to get both the suburban and my SWB to a car show, hmmm.

11-21-2012, 01:43 AM	#140
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Mark's 66 Burb Build Really looks great keep it up Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

11-28-2012, 11:49 AM	#141
yawdie1 Registered User Join Date: Nov 2009 Location: Brooklyn Park, MN Posts: 65	Re: Mark's 66 Burb Build Im sure you heard this before but............. Very nice job! Been looking for a burb like that but can't find any. Very cool, very cool! __________________ 1950 chevy PU work in progress.

12-02-2012, 10:13 AM	#142
Lolyin58 Registered User Join Date: Mar 2008 Location: Calgary,Alberta,Canada Posts: 372	Re: Mark's 66 Burb Build Looking really good. Great color combo!! __________________ Dino's 3rd annual Pre-ShowGit Down http://67-72chevytrucks.com/vboard/s...12#post5639812

12-02-2012, 12:18 PM	#143
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Mark's 66 Burb Build very cool!! __________________ CHEVY ONLY... Nothin Else !

12-02-2012, 01:21 PM	#144
Nobby Senior Member Join Date: Feb 2005 Location: St. Amant Louisiana Posts: 840	Re: Mark's 66 Burb Build Burb looks great Mark..Quick question, where did you get your side window rubber? Thanks

12-02-2012, 11:58 PM	#146
toocrazy Registered User Join Date: May 2008 Location: Florida Posts: 281	Re: Mark's 66 Burb Build As you 66 and older burb guys know there is not any aftermarket molded carpet available for these trucks. I can trim out carpet on flat surfaces but when it comes to the transmission hump and making the carpet look right forget about it. I purchased my automotive loop carpet online and had it shipped in. It did have a rubber backing on it I was told was used to mold carpet.......they heat up the carpet and press it on to a mold. I enlisted the guy who covered my seats to lay my carpet. He used a heat gun to mold the carpet around the transmission hump. He did a little stitching as well to make it fit. I ordered some black binding and as you can see after he cut the carpet he sewed this around the edges. He even ordered the rubber drivers side foot mat and sewed it in so I wouldnt wear out the carpet. The truck is in three pieces but it overlaps nice and looks like a factory job. I am extremely happy and would have never tried to tackle this on my own. I had around $300 in the carpet including shipping and he charged me $400 in labor to do the work. next job, get some tunes in this truck!! __________________ CHECK OUT MY 69 SLAMMED C10 BUILD 22/24's CHECK OUT MY 66 BURB BUILD 22's/24's Check out GodSpeed Rides on FACEBOOK

12-03-2012, 12:27 AM	#147
clemdaddy Senior Member Join Date: Oct 2009 Location: Fayetteville, Arkansas Posts: 1,923	Re: Mark's 66 Burb Build just caught up with this build. thats a cool burb and very tastefully done. love all your rides and the place, wow what a cool place you have. will be following along...



Register or Log In To remove these advertisements.

12-03-2012, 12:15 PM	#148
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Mark's 66 Burb Build Looking killer man ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-03-2012, 02:36 PM	#149
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Mark's 66 Burb Build That carpet looks amazing!!! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

Register or Log In To remove these advertisements.