My 1968 C-20 Golden Anniversary Project - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GerhardH · 10-15-2020, 01:44 PM

Continue!

GerhardH · 10-15-2020, 01:46 PM

Some more

GerhardH · 10-15-2020, 01:48 PM

Fuel-,oil pump and cylinder heads

The small plastic bushing in my opinion don't needed if you have an oil pump shaft with a guide (both in picture 1).

Copper oil pump gasket SUM-111480, in my opinion normally not needed, but can't hurt.

GerhardH · 10-15-2020, 01:52 PM

Head bolts ARP #134-3701 (12-point)

16 pcs 1.750" UHL
04 pcs 3.060" UHL
14 pcs 4.180" UHL

Working perfect.

Torque: 70 ft lbs

GerhardH · 10-18-2020, 08:46 AM

Preparing rockers, pushrods etc.

Despite I ordered the same part number EPR 34B (8 pcs. each) twice I received two different lengths pushrods=== TIME DELAY!!! Lesson learned: Always order one complete set.

Right length 7.794“
Wrong lenght: 8.544“

Time for preparing accessoiries.

GerhardH · 10-18-2020, 08:54 AM

Preparing valve covers.

Grommets are perfect:
PCV Valve grommet 42052 Dorman and/or WVE 2P1006

**Ol Blue K20** · 10-18-2020, 09:06 AM

That's gonna be a nice engine!

GerhardH · 08-09-2021, 10:08 AM

Last entry from 10-18-2020, 04:56 PM , was completly frustrated, because of the not matching valve timings (tested with Summit Degree Wheel), after studing and learning alot now new hope, start soon.

**Ol Blue K20** · 08-10-2021, 06:45 AM

Goodness, you're getting technical. I'm glad to see you're still around....

GerhardH · 05-26-2022, 04:24 AM

Hobby is gone, truck sold, was a nice time here in the forum

JerDom · 09-22-2023, 12:18 PM

Quote:

Originally Posted by Ol Blue K20

Goodness, you're getting technical. I'm glad to see you're still around....

Quote:

Originally Posted by GerhardH

Hobby is gone, truck sold, was a nice time here in the forum

I JUST came across this thread.

I knew this was going to happen

I gave, made, sold many parts to Gerhard and tried to give him a lot of common sense advice but being a German engineer he was determined to complicate the living dung out of everything.

I always wondered if he'd frustrate himself into packing it in which looks like finally happened - so sorry , too bad

Jerry in Canada

**68bowtie** · 05-26-2022, 07:13 PM

Noooo! Say it isn’t so. Call it temporary, leave the door open just in case another truck happens to cross your path.

LT7A · 05-28-2022, 05:52 AM

Oh man, hadn't seen this build before, was just getting into it. I've never seen such detailed care taken in engine assembly. Good luck Gerhard. Sorry to hear that you sold it, but sometimes that has to happen. Hope to see you back. It looks like you got it all together. How did it run?

**Ol Blue K20** · 05-30-2022, 06:58 AM

You can still stop in Gerhard.

cornerstone · 05-31-2022, 05:00 PM

I'm surprised! What's the next project Gerhard?

10-15-2020, 01:46 PM	#2
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project Some more Attached Images __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400

10-15-2020, 01:48 PM	#3
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project Fuel-,oil pump and cylinder heads The small plastic bushing in my opinion don't needed if you have an oil pump shaft with a guide (both in picture 1). Copper oil pump gasket SUM-111480, in my opinion normally not needed, but can't hurt. Attached Images __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400 Last edited by GerhardH; 10-18-2020 at 08:36 AM.

10-15-2020, 01:52 PM	#4
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project Head bolts ARP #134-3701 (12-point) 16 pcs 1.750" UHL 04 pcs 3.060" UHL 14 pcs 4.180" UHL Working perfect. Torque: 70 ft lbs Attached Images __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400

10-18-2020, 08:46 AM	#5
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project Preparing rockers, pushrods etc. Despite I ordered the same part number EPR 34B (8 pcs. each) twice I received two different lengths pushrods=== TIME DELAY!!! Lesson learned: Always order one complete set. Right length 7.794“ Wrong lenght: 8.544“ Time for preparing accessoiries. Attached Images __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400

10-18-2020, 08:54 AM	#6
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project Preparing valve covers. Grommets are perfect: PCV Valve grommet 42052 Dorman and/or WVE 2P1006 Attached Images __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400

10-15-2020, 01:44 PM	#1
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project Continue! Attached Images __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400

10-18-2020, 09:06 AM	#7
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: My 1968 C-20 Golden Anniversary Project That's gonna be a nice engine! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

08-09-2021, 10:08 AM	#8
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project Last entry from 10-18-2020, 04:56 PM , was completly frustrated, because of the not matching valve timings (tested with Summit Degree Wheel), after studing and learning alot now new hope, start soon. Attached Images __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400

08-10-2021, 06:45 AM	#9
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: My 1968 C-20 Golden Anniversary Project Goodness, you're getting technical. I'm glad to see you're still around.... __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

05-26-2022, 04:24 AM	#10
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: My 1968 C-20 Golden Anniversary Project Hobby is gone, truck sold, was a nice time here in the forum Attached Images __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400

05-26-2022, 07:13 PM	#12
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,742	Re: My 1968 C-20 Golden Anniversary Project Noooo! Say it isn’t so. Call it temporary, leave the door open just in case another truck happens to cross your path. __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

05-28-2022, 05:52 AM	#13
LT7A Registered User Join Date: Oct 2015 Location: PNW Posts: 3,615	Re: My 1968 C-20 Golden Anniversary Project Oh man, hadn't seen this build before, was just getting into it. I've never seen such detailed care taken in engine assembly. Good luck Gerhard. Sorry to hear that you sold it, but sometimes that has to happen. Hope to see you back. It looks like you got it all together. How did it run?

05-30-2022, 06:58 AM	#14
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: My 1968 C-20 Golden Anniversary Project You can still stop in Gerhard. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

05-31-2022, 05:00 PM	#15
cornerstone Registered User Join Date: Apr 2014 Location: Azle,Texas Posts: 2,248	Re: My 1968 C-20 Golden Anniversary Project I'm surprised! What's the next project Gerhard? __________________ Brian 1972 C10, "Loyd", LWB to SWB, 5.3, L83/6L80e, 4:11 Tru Trac, Air Ride, VA, DD, 20" Coys, 4 wheel disc, A quick LS swap turned into a 6 year frame off resto-mod.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.