Scott's hotrods shop truck - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Scottshotrods · 05-21-2010, 11:43 AM

Today we be setting a mock up motor and tranny in to lay out the tranny tunnel and
drive shaft tunnel.We will have pics up later today to show progress.
Justin

dallas71 · 05-21-2010, 04:12 PM

what is the part # for the wilwood setup for our trucks?? 5 lug or where did you find it????

Alan's Classic · 05-21-2010, 10:52 PM

You are living about everyone's dream on this board. Beautiful work!!

Scottshotrods · 05-22-2010, 12:16 AM

Quote:

Originally Posted by dallas71

what is the part # for the wilwood setup for our trucks?? 5 lug or where did you find it????

If you call us at the shop or e-mail me I can get the info for you.
justin@scottshotrods.com
(805)485-0382

Scottshotrods · 05-22-2010, 12:18 AM

Just got the floor pan in today on sat will weld it all up and then I will try
an upload pics for the first time myself.
Justin

*LILRED66* · 05-22-2010, 04:23 AM

The man behind the hood, running the TIG beads, is a truly gifted mechanic! Very impressive build and photo documentation.

I am not sure whether I am inspired or ready to throw in the towel...

Hottrucks · 05-22-2010, 07:49 AM

Quote:

Originally Posted by LILRED66

The man behind the hood, running the TIG beads, is a truly gifted mechanic! ...

Once you see his stuff you wil relize he's a machine!!!

Stop teaseing ...we didn't forget about what your going to do out back??

Scottshotrods · 05-22-2010, 10:30 AM

Sat am welding up the floor pan and working on the rear suspension design going
to be very impressive.
Justin

Scottshotrods · 05-22-2010, 06:12 PM

E-mailed pictures over to Lou to upload for me.Never uploaded pics before myself.
On monday I will have jeph give me a lesson on how to do it.lol

LUCKIN-FOU · 05-22-2010, 06:19 PM

Justin asked me to up load these so you guys could see them.

Hottrucks · 05-23-2010, 09:27 AM

Quote:

Originally Posted by Scottshotrods

E-mailed pictures over to Lou to upload for me.Never uploaded pics before myself.
On monday I will have jeph give me a lesson on how to do it.lol

you know there going to give you crap for that....looks great.....

Scottshotrods · 05-23-2010, 07:35 PM

Quote:

Originally Posted by Hottrucks

you know there going to give you crap for that....looks great.....

Still learning how to use a computer.lol
Justin

jephs422 · 05-24-2010, 11:20 AM

Quote:

Originally Posted by Scottshotrods

Still learning how to use a computer.lol
Justin

Yeah but just think, a few years ago you couldn't even send an e-mail!! Look how far you've come, LOL!

Scottshotrods · 05-24-2010, 02:14 PM

Quote:

Originally Posted by jephs422

Yeah but just think, a few years ago you couldn't even send an e-mail!! Look how far you've come, LOL!

You have been a good teacher.Give me a lesson on how to post pics.
Justin

Scottshotrods · 05-22-2010, 07:19 PM

Lou, Thanks for uploading our pics.

For the pictures I got the floor pan in on the d/s today and started welding the floor up
all the way around in sections.The welding is not done all the way yet will be soon.
Also got the bbc mock-up motor mocked in place and got our m/m in place where they are going to go.We have plenty of clearence for the steering shaft to go to the rack.
We will mock up or tranny next to lay out the tranny tunnel to start making it.More pics
to come on monday.
Justin

jephs422 · 05-27-2010, 07:48 PM

Allright, it's been a super busy week. Justin just got around to finishing up the floor pan. Here's a few pictures of it. It'll be seam sealed in a bit. The center section is left unwelded since it's coming out for the trans tunnel anyhow.

Hey Jeff when are you gonna take over the shows for me...I wanna stay home and cuddle all winter

brawley · 05-27-2010, 07:53 PM

what a great find!! and an impressive build, this thing will be sweeeet.

KIC · 03-19-2011, 01:30 AM

I just checked on SNOPES and it turns out that the Burb doesn't exist. It's just a photo shopped internet email/forum hoax. There was one on the Chevy Vega forum too........Too bad...had me going for a while....

Scottshotrods · 03-19-2011, 01:38 AM

Quote:

Originally Posted by KIC

I just checked on SNOPES and it turns out that the Burb doesn't exist. It's just a photo shopped internet email/forum hoax. There was one on the Chevy Vega forum too........Too bad...had me going for a while....

Really you must of been to my shop and took it out of my shop tonight?
Come on guys do you really think there is no burb I am building you guys really crack me up.Also keep in mind this will not make me post pics either any faster than we have before.It takes me to long to photo shop them together like a few of you think I do.

Justin

Hottrucks · 03-19-2011, 07:47 AM

Hmmmmm we need spy photos??? who could I call to snap a few

I'm willing to throw a few bucks in the pot to hire one of those sleezy pic takers...you know the type that look like they are looking to steal your car

daverod · 05-27-2010, 07:53 PM

Very nice. Nice and clean. Nothing like the work I do.

Hottrucks · 05-27-2010, 08:14 PM

Quote:

Originally Posted by jephs422

Hey Jeff when are you gonna take over the shows for me...I wanna stay home and cuddle all winter

Say the word and I can be there in 4 days...unless the show is on the way...

Scottshotrods · 05-27-2010, 08:28 PM

We have some cool ideas we will be doing to our shop truck.The more I look at it the
more things I come up with.
Justin

Scottshotrods · 05-28-2010, 09:32 PM

Today got the motor mounts welded in place and the tranny tunnel section cutout.
This weekend I will be doing some body mods and I will be posting some pictures
for you guys to check out.
Justin

daverod · 05-28-2010, 09:33 PM

Yes,yes more pictures.

05-21-2010, 11:43 AM	#1
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Scott's hotrods shop truck Today we be setting a mock up motor and tranny in to lay out the tranny tunnel and drive shaft tunnel.We will have pics up later today to show progress. Justin

05-21-2010, 04:12 PM	#2
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	Re: Scott's hotrods shop truck what is the part # for the wilwood setup for our trucks?? 5 lug or where did you find it???? __________________ My 1966 LWB Truck My 1966 SWB Truck

05-21-2010, 10:52 PM	#3
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Scott's hotrods shop truck You are living about everyone's dream on this board. Beautiful work!! __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

05-22-2010, 12:18 AM	#5
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Scott's hotrods shop truck Just got the floor pan in today on sat will weld it all up and then I will try an upload pics for the first time myself. Justin

05-22-2010, 04:23 AM	#6
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Scott's hotrods shop truck The man behind the hood, running the TIG beads, is a truly gifted mechanic! Very impressive build and photo documentation. I am not sure whether I am inspired or ready to throw in the towel...

05-22-2010, 10:30 AM	#8
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Scott's hotrods shop truck Sat am welding up the floor pan and working on the rear suspension design going to be very impressive. Justin

05-22-2010, 06:12 PM	#9
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Scott's hotrods shop truck E-mailed pictures over to Lou to upload for me.Never uploaded pics before myself. On monday I will have jeph give me a lesson on how to do it.lol

05-22-2010, 06:19 PM	#10
LUCKIN-FOU I'M NOT SCARED I HAVE A PLASMA Join Date: Feb 2008 Location: The PLACE Posts: 172	Re: Scott's hotrods shop truck Justin asked me to up load these so you guys could see them. __________________ Lou Santiago US Navy Retired/World Traveler Car Builder/Welder/Airport Investigator garageinsidertv.com [FORUM] WORK IS FOR PEOPLE WHO CAN'T FISH. I GUESS I'M SCREWED BECAUSED I HATE FISHING.

05-22-2010, 07:19 PM	#15
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Scott's hotrods shop truck Lou, Thanks for uploading our pics. For the pictures I got the floor pan in on the d/s today and started welding the floor up all the way around in sections.The welding is not done all the way yet will be soon. Also got the bbc mock-up motor mocked in place and got our m/m in place where they are going to go.We have plenty of clearence for the steering shaft to go to the rack. We will mock up or tranny next to lay out the tranny tunnel to start making it.More pics to come on monday. Justin Last edited by Scottshotrods; 05-22-2010 at 10:32 PM.

05-27-2010, 07:48 PM	#16
jephs422 Registered User Join Date: Jun 2008 Location: Oxnard CA Posts: 301	Re: Scott's hotrods shop truck Allright, it's been a super busy week. Justin just got around to finishing up the floor pan. Here's a few pictures of it. It'll be seam sealed in a bit. The center section is left unwelded since it's coming out for the trans tunnel anyhow. Hey Jeff when are you gonna take over the shows for me...I wanna stay home and cuddle all winter __________________ Jeff Savaglio Scott's Hotrods Oxnard CA 93030

05-27-2010, 07:53 PM	#17
brawley Easy Does It Join Date: Apr 2007 Location: Dirdy Mo , North Carolina Posts: 450	Re: Scott's hotrods shop truck what a great find!! and an impressive build, this thing will be sweeeet.

03-19-2011, 01:30 AM	#18
KIC 1960 GMC Burb Join Date: Jan 2008 Location: Arizona Posts: 385	Re: Scott's hotrods shop truck I just checked on SNOPES and it turns out that the Burb doesn't exist. It's just a photo shopped internet email/forum hoax. There was one on the Chevy Vega forum too........Too bad...had me going for a while.... __________________ 1960 GMC Suburban 1/2 ton V-6 2nd generation original owner 60 Burb Build thread: http://67-72chevytrucks.com/vboard/s...=1960+Suburban 60 to 66 Burbs only Thread: http://67-72chevytrucks.com/vboard/s...ighlight=burbs 2003 Tahoe LT

03-19-2011, 07:47 AM	#20
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: Scott's hotrods shop truck Hmmmmm we need spy photos??? who could I call to snap a few I'm willing to throw a few bucks in the pot to hire one of those sleezy pic takers...you know the type that look like they are looking to steal your car

05-27-2010, 07:53 PM	#21
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Scott's hotrods shop truck Very nice. Nice and clean. Nothing like the work I do. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

05-27-2010, 08:28 PM	#23
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Scott's hotrods shop truck We have some cool ideas we will be doing to our shop truck.The more I look at it the more things I come up with. Justin



Register or Log In To remove these advertisements.

05-28-2010, 09:32 PM	#24
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Scott's hotrods shop truck Today got the motor mounts welded in place and the tranny tunnel section cutout. This weekend I will be doing some body mods and I will be posting some pictures for you guys to check out. Justin

05-28-2010, 09:33 PM	#25
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Scott's hotrods shop truck Yes,yes more pictures. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

Register or Log In To remove these advertisements.