55.2-59 57 Fleetside C4 build

[Jason 56]

Nice work. You’re making great progress!

[Dan in Pasadena]

Originally Posted by 57FleetsideC4

Made some more progress on the truck. Got the roof, dash, glove box, ash tray and the second color on the dash. Now to paint the rest of the inside of the cab. Slowly making progress. Steve

Everything looking nice. Your color reminds me a lot of my truck when it was in it's "shop truck" look. This was before I tore it all down for a full paint job.

Mine was rattle can stuff just to get it all one color....and then I couldn't help myself. I added another color to the palette.

[57FleetsideC4]

I am going to get this thread up to date. In May I painted the inside of the cab. It was pretty hard reaching into all the areas with hitting something but got it done. Here are some pics Steve

[Rickysnickers]

Looks great!!!

[57FleetsideC4]

Originally Posted by Rickysnickers

Looks great!!!

Thank You. Steve

[dsraven]

that looks really good, nice job. keep the pics coming, its great to see forward motion on a project and really good to see it when the parts get put together for the final time.

[youngrodder]

Looking great. Final assembly is the best.

[Jason 56]

Looking good! I like the original white roof look.

[57FleetsideC4]

Originally Posted by dsraven

that looks really good, nice job. keep the pics coming, its great to see forward motion on a project and really good to see it when the parts get put together for the final time.

Originally Posted by youngrodder

Looking great. Final assembly is the best.

Originally Posted by Jason 56

Looking good! I like the original white roof look.

Thank you for the kind comments. My goal was to have all the color on it by fall then spend all winter putting it together and hope to have it burning gas in the spring. Steve

[57FleetsideC4]

More progress on the 57 project. Got the bed panels and inner wheelhouses all painted. Still a ways to go but getting closer. also took a piece of pine and put a lighter and darker stain then 4 coats of the same clear I used on the body. here are the pics of the panels. Steve

[dsraven]

nce job!
I like the way you have the dark color "stripe" on the upper body line. that breaks itup very nicely in my opinion.
keep on posting the progress, it keeps us slackers interested. i actually had time between other jobs to do a little work on my 57 the last few days,. been awhile.

[dsraven]

man, i gotta proof read a little before hitting post. it seems like I mess up a lot typing this stuff up. fat fingers.

[Jason 56]

Looks great! Is that the start of a cut n buff I see on the back of the cab?

[57FleetsideC4]

Originally Posted by dsraven

nce job!
I like the way you have the dark color "stripe" on the upper body line. that breaks itup very nicely in my opinion.
keep on posting the progress, it keeps us slackers interested. i actually had time between other jobs to do a little work on my 57 the last few days,. been awhile.

Thank You. I did the upper strip of brown to break up the two tone.

Originally Posted by Jason 56

Looks great! Is that the start of a cut n buff I see on the back of the cab?

Thank You. Yes that was the start of the cut and buff. That area is buffed out now. Steve

[57FleetsideC4]

I started to work on the inside of the cab and core support. I put down some fat mat on the floor, back wall, firewall and kick panels. I want to put it on the roof where the headliner goes put not sure it will stick good. Got the Vintage Air box installed, radio, wiper motor and transmissions and started running hose for the heater and a/c. Little bit at a time. Steve

[Rickysnickers]

Um, didn't we already discuss this Dennis???? I mean really.....

[daveshilling]

Nice job! Looks clean, intentional, and professional.

[57FleetsideC4]

Originally Posted by daveshilling

Nice job! Looks clean, intentional, and professional.

Thank You. Steve

[Nut Case]

*****in Strong Work

Keep on Keepin on

nutz

[Nut Case]

Bit

nutz

[Nut Case]

CHIN


nutz


there that will blow hatz and that's all i have to say about that

[57FleetsideC4]

Hi, Making some more progress on the 57 pickup project. Got a lot of the wiring done, decided where the PCM, TAC module and relay center will live. Installed the steering column, almost done with the vintage air install, started making brake lines and battery cables. I should be able to power up the truck and see if I can communicate with the PCM, see if the fuel pump has its 2 second prime and run the fans. Getting closer all the time. The ligh is getting brighter at the end of the tunnel. Steve

[57FleetsideC4]

Some more progress pictures of my project. Test fit the steering wheel after, finished making battery cables, brake lines and made the aluminum panels for under the back window which will get covered with carpet. Getting closer. Steve

[Jason 56]

Looking great. I’m in the same assembly phase with my build. I’ve been trying to figure out what to do with my back wall. I may be borrowing your idea. I like it. Keep up the pace. You’ll be done before the thaw!

[57FleetsideC4]

Originally Posted by Jason 56

Looking great. I’m in the same assembly phase with my build. I’ve been trying to figure out what to do with my back wall. I may be borrowing your idea. I like it. Keep up the pace. You’ll be done before the thaw!

Thank You. I used .060" aluminum for those pieces. the end pieces were pretty tough to bend as I have know bending tools so had to use the vice and my Argon tank. It worked out and should look good. I started on the door stuff and found out the reproduction vent window mounting holes were all off and had to be redrilled. Yes!! I hope to have it running in the spring Steve