dinos 64 soon to be a long bed dually

[Dinos63]

Originally Posted by Captainfab

Ok that is what I was thinking would need to be done, but I haven't seen this done before, so I wasn't sure. That being the case, a guy should be able to get the worn out truck wheels pretty reasonable, since the machining will take care of the worn lip.

Captain this whole wheel deal is spendy worn out wheels or not

[mcmlxix]

Originally Posted by Dinos63

captain they have been machined to 22" and the rear wheels have been faced 1/4 " theres a ton of work to make these work

I re-read the thread and maybe I missed it, but who did the machine work on the rims? Also, what does facing the rears 1/4" mean and why was it done?

[Dinos63]

Originally Posted by mcmlxix

I re-read the thread and maybe I missed it, but who did the machine work on the rims? Also, what does facing the rears 1/4" mean and why was it done?

I got my wheels from john at tire pros(big time shop for wheels in phx) they came off a truck from sema and were all ready milled and faced,but also erok on the board is the goto guy on these semis he cuts them mills,polish dynaduallywheels.com the facing is just to get them a lil more narrowed to tuck

[Dinos63]

Originally Posted by DRTYRAT30

Dude that's wild...I dig it man... Oh and I got my room reservation at the HoJo in Norco for brothers...
Posted via Mobile Device

sweet !! i need to make mine

[lolife99]

Looks good Dino!
Are the PB a-arms narrower than stock?

Also,... what are you doing to the rear frame to beef it up for towing?

This might be my favorite truck of yours!
(I always wanted to do this to a 67-72 3/4-ton longbed)

[64shortc10]

Simply SICK! Are you getting the wheels polished out? I say leave them all dirty looking and go flat black on the body. Sinister look. Also are the rear wheels going to hit the outside fender when its laid out with that big notch? I agree with lolife this is gonna be my favorite rig of yours yet!
Tony from Norcal
Posted via Mobile Device

[Dinos63]

Originally Posted by 64shortc10

Simply SICK! Are you getting the wheels polished out? I say leave them all dirty looking and go flat black on the body. Sinister look. Also are the rear wheels going to hit the outside fender when its laid out with that big notch? I agree with lolife this is gonna be my favorite rig of yours yet!
Tony from Norcal
Posted via Mobile Device

Tony wheels are already polished good idea !the rear should be good i have 7ft rear axle and i had the rear wheels have been faced .also joe will stretch the fender a bit to. still got my sub?

[1984chevypickup]

Bad ass truck I am going to have to tag along with this one
Posted via Mobile Device

[Dinos63]

thanks kat! well looks like it will all fit still need the rear 3" blocks and the test tires are 32" or so tall and my new wheel combo will be 28" so it should lay out well.wednesday i will fit the semis

[Dinos63]

Originally Posted by lolife99

Looks good Dino!
Are the PB a-arms narrower than stock?

Also,... what are you doing to the rear frame to beef it up for towing?

This might be my favorite truck of yours!
(I always wanted to do this to a 67-72 3/4-ton longbed)

thanks kat! the arms are stock lenght but nate relocated the ball joint to center the wheel,rear will be super beefy after the notchs are in bolted plus welded i will brace the h--- out them and two more crossmembers in the rear

[DLOE65]

In the words of Joe Dirt ... "Daaaaaaaang!"
Posted via Mobile Device

[67cheby]

Holy smokes !
Posted via Mobile Device

[JOHNORO]

Awesome Dino !
you guys are banging this one out
can't wait to see in in July
Posted via Mobile Device

[coulter]

this is gonna be sicker than a cancer patient!!!!!! cant wait to see how this turns out

[Alan's Classic]

Drool!!

[Slammed66]

Man, your crankin on this thing.

I dig it.

I need to send my stepside down somewhere between yours and Delmo's place. you two could have it knocked out in about 38 seconds!!

[orngsikL]

gonna be a sick truck, very cool!

[Dunenutt]

You're going to have to c-notch the trailer just to be able to hook it up

Cant wait to see those monster Alcoas bolted up!

[64shortc10]

I wanna see them semi 22's on this thing. Love the build Dino! I'm probably gonna trade the Burban for rust repair on my 66? Let me know if you want it we can work something out?
Tony from Norcal
Posted via Mobile Device

[Dinos63]

Originally Posted by 64shortc10

I wanna see them semi 22's on this thing. Love the build Dino! I'm probably gonna trade the Burban for rust repair on my 66? Let me know if you want it we can work something out?
Tony from Norcal
Posted via Mobile Device

yeah i want that sub but not sure how to get it home

[wutnxt]

Dude....

I work....and I work....and work some more and I still can't keep up to you.....lol

[Dinos63]

thanks always duudes, Randy shhh-- you have 10 builds going at the same time all cool stuff I am back yard ham&egger
I did get a little done today some clean up moved my motor to get ready for some bling and gutted the cab some more wiring and stuff.I got another pair of inner fender wells to throw behind my garage

[Dinos63]

and one more random pic of my prostreet truck, just waiting for the brothers show

[chance65c20]

man this i gonna be one bad a@@ truck!!!! definitly subscribed!!!!! cant wait to see it done....

[wutnxt]

Dude...

Did you just call yourself " a back yard ham and egger "....busts out laughing...the things you say crack me up. Dude you got game brother....big game....