OK ALL MUST GO - Bodies, Sheetmetal, Hard Top & More - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71GeneralMotorsCorp · 12-29-2012, 01:38 AM

Just so everyone knows, the 4x4 blazer with double wall top is sold to me.

Brianhill6 · 12-29-2012, 09:11 AM

I am looking for a blazer stock speaker, the one that hangs under the dash. Do you have one of them?

MoreLoveThanMoney · 12-29-2012, 09:52 AM

Quote:

Originally Posted by Brianhill6

I am looking for a blazer stock speaker, the one that hangs under the dash. Do you have one of them?

Sorry I do not buy thanks for asking. I don't think I've ever even seen one.
Posted via Mobile Device

toyplumbertrucks · 12-30-2012, 12:08 PM

I have been looking for a decent 4wd Blazer frame(not a roller unless that is what you have). Someone cut the back of mine to but a step bumper on it. I also could use a set of doors, and possibly a drivers side quarter panel (mine is rough but I have a spare that is a little less than perfect). I am not gonna start this project right away , but if you have any of these and the price is right I may jump on it. Let me know. I am near Chicago so I would probably make the trip since it would be a two day deal and fuel cost would be reasonable, depending on price of parts.

Brianhill6 · 12-30-2012, 07:22 PM

Do you have any rear wheel wells?

MoreLoveThanMoney · 01-03-2013, 08:36 PM

Quote:

Originally Posted by toyplumbertrucks

I have been looking for a decent 4wd Blazer frame(not a roller unless that is what you have). Someone cut the back of mine to but a step bumper on it. I also could use a set of doors, and possibly a drivers side quarter panel (mine is rough but I have a spare that is a little less than perfect). I am not gonna start this project right away , but if you have any of these and the price is right I may jump on it. Let me know. I am near Chicago so I would probably make the trip since it would be a two day deal and fuel cost would be reasonable, depending on price of parts.

Heres what I can offer you. I have a converted 2wd blazer. I have all of the 4wd brackets that came off of it but I do not have the front axle. I do have a nice passenger side but I alsohave an entire blazer tub. I can send you a link to the photos of it. It has a title and is an a/c dash. You could use those sides on yours and sell the rest or use the whole tub. Your choice. Let me know what you think and I can get you pics and we can talk price.

Quote:

Originally Posted by Brianhill6

Do you have any rear wheel wells?

I have one or two sets left. I know they do not have rusted lips but may have a couple of bruises. The set is cheap but the shipping is not. I shipped a pair to somone else and it seems like it was around $30 to ship. Without checking on freight, I would be around $60 for a pair shipped.

blazer1972 · 01-14-2013, 06:50 PM

how much for the front top hold down bracket?

KShepJr · 01-17-2013, 09:13 PM

If your tub is still available I would be interested depending upon condition. Also would be interested in doors if you have any, I need both sides.

Thanks!

roOstersan · 01-18-2013, 01:59 PM

Any chance of you still having a locking blazer hatch handle?
Posted via Mobile Device

the_69_C10 · 01-21-2013, 11:56 PM

Could you ship the gas tank? If so, does it have all the sending unit, straps, etc.

MoreLoveThanMoney · 01-22-2013, 04:26 PM

Quote:

Originally Posted by blazer1972

how much for the front top hold down bracket?

Im sorry I dont have any of the hold down brackets. They have already been sold.

Quote:

Originally Posted by KShepJr

If your tub is still available I would be interested depending upon condition. Also would be interested in doors if you have any, I need both sides.Thanks!

The tub is still for sell. It is actually on ebay right now.
http://cgi.ebay.com/ebaymotors/1972-...item4d08e2af0e
Thanks![/QUOTE]

Quote:

Originally Posted by roOstersan

Any chance of you still having a locking blazer hatch handle?
Posted via Mobile Device

I do not have a hatch handle. Thanks for asking though.

Quote:

Originally Posted by the_69_C10

Could you ship the gas tank? If so, does it have all the sending unit, straps, etc.

I sold the one good tank I have and I shipped it. I have on emore tank but it is just the tank. No filler neck or straps. Its in rebuildable condition.

the_69_C10 · 01-22-2013, 10:07 PM

Quote:

Originally Posted by MoreLoveThanMoney

Im sorry I dont have any of the hold down brackets. They have already been sold.

The tub is still for sell. It is actually on ebay right now.
http://cgi.ebay.com/ebaymotors/1972-...item4d08e2af0e
Thanks!

I do not have a hatch handle. Thanks for asking though.

I sold the one good tank I have and I shipped it. I have on emore tank but it is just the tank. No filler neck or straps. Its in rebuildable condition.[/QUOTE]

I'll take it, but it'll have to be dirt cheap. I'm in a tight spot.

JDahl · 01-23-2013, 01:53 PM

Orange Blazer still there?

brian1971 · 01-29-2013, 12:00 PM

Do you have any vac/tach dash tins and 71 driver side sport mirrors mounting bracket with screws.Also looking for knob on end of bench seat lever.
Thanks Brian
Posted via Mobile Device

MoreLoveThanMoney · 01-29-2013, 01:56 PM

Quote:

Originally Posted by brian1971

Do you have any vac/tach dash tins and 71 driver side sport mirrors mounting bracket with screws.Also looking for knob on end of bench seat lever.
Thanks Brian
Posted via Mobile Device

Cant help with the first items but maybe the knobs. Are bench seat knobs different than the buckets?

brian1971 · 01-29-2013, 11:45 PM

Thanks for reply,don't know if there same as buckets
Posted via Mobile Device

unclegrape · 02-05-2013, 05:31 PM

Are the non-AC dashes still available? Any pictures? What would shipping be to 82001?

4oldcars · 02-09-2013, 10:58 AM

If you cut up any bodies, I'd be interested in a couple patch panels for the blazer rear bed/floor. Maybe 10-12" square shipped to 20736. PM price if available. Thanx.

the_69_C10 · 02-23-2013, 03:15 PM

Do you have the chrome trim peace that goes over the door panel?

tdkosta · 02-23-2013, 05:42 PM

Do you still have the driver's side fenders? I need one for an ochre '71 blazer to 85208. Thanks, Tony

68panelman · 02-25-2013, 06:48 PM

Any rear rubber floor mat for a blazer?

1972K20 · 02-25-2013, 07:49 PM

Do you have a good tailgate?
Posted via Mobile Device

ozziemex · 03-13-2013, 06:59 AM

Do you have any fuel tanks left for the burb or blazers?

MoreLoveThanMoney · 03-16-2013, 01:03 AM

I don't have any fuel tanks left but thanks for asking
Posted via Mobile Device

Zoomin · 03-16-2013, 09:59 PM

Have any vent windows with good chrome on them? The rubber doesn't have to be great but the chrome does. Thanks!

12-29-2012, 01:38 AM	#1
71GeneralMotorsCorp Registered User Join Date: Jul 2011 Location: Kansas Posts: 266	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Just so everyone knows, the 4x4 blazer with double wall top is sold to me.

12-29-2012, 09:11 AM	#2
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More I am looking for a blazer stock speaker, the one that hangs under the dash. Do you have one of them?

12-30-2012, 12:08 PM	#4
toyplumbertrucks Registered User Join Date: Aug 2012 Location: st. john, in Posts: 280	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More I have been looking for a decent 4wd Blazer frame(not a roller unless that is what you have). Someone cut the back of mine to but a step bumper on it. I also could use a set of doors, and possibly a drivers side quarter panel (mine is rough but I have a spare that is a little less than perfect). I am not gonna start this project right away , but if you have any of these and the price is right I may jump on it. Let me know. I am near Chicago so I would probably make the trip since it would be a two day deal and fuel cost would be reasonable, depending on price of parts. Attached Images

12-30-2012, 07:22 PM	#5
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Do you have any rear wheel wells?

01-14-2013, 06:50 PM	#7
blazer1972 Registered User Join Date: Oct 2012 Location: CA Posts: 45	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More how much for the front top hold down bracket?

01-17-2013, 09:13 PM	#8
KShepJr Registered User Join Date: Apr 2012 Location: Greenwich, NJ Posts: 6	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More If your tub is still available I would be interested depending upon condition. Also would be interested in doors if you have any, I need both sides. Thanks!

01-18-2013, 01:59 PM	#9
roOstersan Registered User Join Date: Aug 2012 Location: Vacaville, Ca Posts: 98	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Any chance of you still having a locking blazer hatch handle? Posted via Mobile Device

01-21-2013, 11:56 PM	#10
the_69_C10 Registered User Join Date: Dec 2012 Location: Tifton, Georgia Posts: 115	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Could you ship the gas tank? If so, does it have all the sending unit, straps, etc. __________________ 1969 C-10 SWB Project 2002 Chevy Silverado Ext Cab LS Build Thread--> "Start of Something New" http://67-72chevytrucks.com/vboard/s...d.php?t=557900

01-23-2013, 01:53 PM	#13
JDahl Registered User Join Date: Jul 2008 Location: Salina, Ks Posts: 24	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Orange Blazer still there?

01-29-2013, 12:00 PM	#14
brian1971 Registered User Join Date: Sep 2012 Location: fort lauderdale,fl Posts: 1,296	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Do you have any vac/tach dash tins and 71 driver side sport mirrors mounting bracket with screws.Also looking for knob on end of bench seat lever. Thanks Brian Posted via Mobile Device __________________ 1971 c10 custom deluxe fleetside swb LS3 w/BTR stage IV cam,4L85E w/3600 stall 67-72chevytrucks.com/vboard/showthread.php?t=558024

01-29-2013, 11:45 PM	#16
brian1971 Registered User Join Date: Sep 2012 Location: fort lauderdale,fl Posts: 1,296	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Thanks for reply,don't know if there same as buckets Posted via Mobile Device __________________ 1971 c10 custom deluxe fleetside swb LS3 w/BTR stage IV cam,4L85E w/3600 stall 67-72chevytrucks.com/vboard/showthread.php?t=558024

02-05-2013, 05:31 PM	#17
unclegrape Registered User Join Date: Jun 2011 Location: Cheyenne, WY Posts: 10	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Are the non-AC dashes still available? Any pictures? What would shipping be to 82001?

02-09-2013, 10:58 AM	#18
4oldcars Registered User Join Date: Jun 2004 Location: On The Beach, S C Posts: 613	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More If you cut up any bodies, I'd be interested in a couple patch panels for the blazer rear bed/floor. Maybe 10-12" square shipped to 20736. PM price if available. Thanx. __________________ 4oldcars Driving: 1971 Jimmy w/68 Chev front clip, 1953 Bel Air 2 dr hdtp, 1996 Roadmaster wagon, 2000 Eldorado The ones I let go: 1931 2 dr sedan, 1935 pick up, 1938 2 dr sedan, 1962 SS 454, 1963 409 wagon, 1970 short bed, 1972 short bed, 1972 sub, 1976 short bed, 1986 long bed, 03 short bed

02-23-2013, 03:15 PM	#19
the_69_C10 Registered User Join Date: Dec 2012 Location: Tifton, Georgia Posts: 115	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Do you have the chrome trim peace that goes over the door panel? __________________ 1969 C-10 SWB Project 2002 Chevy Silverado Ext Cab LS Build Thread--> "Start of Something New" http://67-72chevytrucks.com/vboard/s...d.php?t=557900

02-23-2013, 05:42 PM	#20
tdkosta Registered User Join Date: Jan 2007 Location: Mesa, AZ Posts: 781	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Do you still have the driver's side fenders? I need one for an ochre '71 blazer to 85208. Thanks, Tony



Register or Log In To remove these advertisements.

02-25-2013, 06:48 PM	#21
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,455	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Any rear rubber floor mat for a blazer?

02-25-2013, 07:49 PM	#22
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 739	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Do you have a good tailgate? Posted via Mobile Device

03-13-2013, 06:59 AM	#23
ozziemex Registered User Join Date: Mar 2009 Location: okc Posts: 25	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Do you have any fuel tanks left for the burb or blazers?

03-16-2013, 01:03 AM	#24
MoreLoveThanMoney Registered User Join Date: Nov 2010 Location: Oklahoma City, Ok Posts: 438	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More I don't have any fuel tanks left but thanks for asking Posted via Mobile Device

03-16-2013, 09:59 PM	#25
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: ALL MUST GO - Bodies, Sheetmetal, Hard Top & More Have any vent windows with good chrome on them? The rubber doesn't have to be great but the chrome does. Thanks! __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

Register or Log In To remove these advertisements.