KS parting out 72 GMC LB BB - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Cash3481** · 02-07-2012, 04:14 PM

Quote:

Originally Posted by Cash3481

Cant send a pic till I get off work. Ill send it when i get off. This is a 3/4 ton Disc/Drum setup. I do have the rod and hardware for this thing as well like you requested.
Mike

Michael Bustamante
I found thios picture for you on the first thread. if it doesnt show what you need let me know. I have everything in this picture (braces and hardware included in the box.

**Cash3481** · 02-07-2012, 11:19 PM

Seat belts $35 plus shipping finally got them off retractors are not the best but they are all there.
BB PS hoses $35 plus shipping
clutch delete plate $15 shipped to the lower 48.

**Cash3481** · 02-07-2012, 11:22 PM

Additional pics of seatbelt and clutch delete plate.
A little fuzzie but nothing wrong with it and I have the hardware too.

hgs_notes · 02-08-2012, 02:58 PM

What is the tailgate condition and would you ship it? Have any pics?

**Cash3481** · 02-08-2012, 03:35 PM

Quote:

Originally Posted by hgs_notes

What is the tailgate condition and would you ship it? Have any pics?

Rusted through on both sides and not worth trying to save.
Mike

**DaHos** · 02-08-2012, 03:54 PM

Status on shipping of BB maifolds?

thx, D'

**Cash3481** · 02-08-2012, 04:04 PM

DaHos: BB manifolds package shipped USPS today at lunch. (half price through USPS ve UPS). I added $100 insurance for both of us!

DD1: One of your packages went ont UPS yesterday and the other went USPS today at lunch. (cost was 2X on the 2d box so I waited until today). I added $100 insurance for both of us!

CC_BOB: Intermediate shaft shipped today as well. (Price was 2X through UPS)

Please let me know when you receive it.

**Cash3481** · 02-10-2012, 07:03 PM

Here is the:

BB high hump $90 shipped

BB fan shroud $90 Shipped

400 Gas pedal $35 plus the ride

BB power steering lines 25 plus the ride

Clutch delete $15 shipped

Let me know if these prices are off or if your intreasted.

**Ironhorse** · 02-10-2012, 08:36 PM

Mike, I'm interested in the clutch delete. Do you have the two attaching hardware bolts/screws ? That is a metal plate correct? Not sure about them since my truck has been a stick shift since I bought it but will be going to auto. If you recall, I got the column from you at the Wichita Swap meet. Enjoyed talking to you. Let me know on the delete plate, you could just put it into a small bubble envelope and drop it in the mail. Total price to Wellington, money order okay ? Don't have a Paypal account.

**Cash3481** · 02-10-2012, 10:08 PM

Quote:

Originally Posted by Ironhorse

Mike, I'm interested in the clutch delete. Do you have the two attaching hardware bolts/screws ? That is a metal plate correct? Not sure about them since my truck has been a stick shift since I bought it but will be going to auto. If you recall, I got the column from you at the Wichita Swap meet. Enjoyed talking to you. Let me know on the delete plate, you could just put it into a small bubble envelope and drop it in the mail. Total price to Wellington, money order okay ? Don't have a Paypal account.

Plate is yours if you want it. I can put in the bubble wrap and yes screws too. Pm your address and I'll get it in the mail. Mailing is $1.70 to Wellington Ks.
Posted via Mobile Device

**Cash3481** · 02-12-2012, 08:50 AM

Price drop!

Quote:

Originally Posted by Cash3481

Here is the:

BB high hump $80 shipped

BB fan shroud $80 Shipped

400 Gas pedal $35 plus the ride

BB power steering lines 25 plus the ride

Clutch delete $15 shipped sold to ironhorse

Let me know if these prices are off or if your intreasted.

Posted via Mobile Device

DD1 · 02-11-2012, 02:39 PM

Hey Mike,

I was curious to know if you included the part circled in this photo with my package. I did not circle it on the original photos, b/c I did not realize that it is part of the A/C system, at least I think it is based on some of the other posts I have read on here.

Could you confirm if it is in fact part of the A/C system and what it is? If you did not send it and it is part of the A/C system, and you still have it, what would it take to get it to me?

Sorry about the hassle, but I am not really familiar with the A/C system.

thanks,

Darien

**jimer1964** · 02-11-2012, 04:10 PM

Mike, vents and visors came today! thank you for a great deal!

**Cash3481** · 02-11-2012, 07:57 PM

Quote:

Originally Posted by DD1

Hey Mike,

I was curious to know if you included the part circled in this photo with my package. I did not circle it on the original photos, b/c I did not realize that it is part of the A/C system, at least I think it is based on some of the other posts I have read on here.

Could you confirm if it is in fact part of the A/C system and what it is? If you did not send it and it is part of the A/C system, and you still have it, what would it take to get it to me?

Sorry about the hassle, but I am not really familiar with the A/C system.

thanks,

Darien

DD1
I have an additional box ot things that went to the dash heater stuff. I guess i only sent what you circled... No problem, I'll send all the rest of it to you on monday. Sound good to you?
Mike
Posted via Mobile Device

Hard On Parts · 02-12-2012, 05:55 AM

Is the inside of that fuel tank clean? Rust free?

**Cash3481** · 02-12-2012, 08:20 AM

Quote:

Originally Posted by Hard On Parts

Is the inside of that fuel tank clean? Rust free?

Truck had no gas cap when I got it. I emptied the tank and fuel didn't have water in it. There is some light surface rust inside the neck. I can get some pics if you'd like to see it better. Let me know.
Mike
Posted via Mobile Device

DD1 · 02-12-2012, 07:20 PM

Quote:

Originally Posted by Cash3481

DD1
I have an additional box ot things that went to the dash heater stuff. I guess i only sent what you circled... No problem, I'll send all the rest of it to you on monday. Sound good to you?
Mike
Posted via Mobile Device

Actually Mike, I got the first box of stuff yesterday, and when I checked it today, that piece was in there. But you did tell me you were sending two boxes, and I did want all of the dash heater stuff, although I am not sure what else you are referring to..

I'll check the box and see if anything is missing.

Do you know what that piece I circled in this last post is?

**Cash3481** · 02-12-2012, 07:43 PM

Quote:

Originally Posted by DD1

Actually Mike, I got the first box of stuff yesterday, and when I checked it today, that piece was in there. But you did tell me you were sending two boxes, and I did want all of the dash heater stuff, although I am not sure what else you are referring to..

I'll check the box and see if anything is missing.

Do you know what that piece I circled in this last post is?

Yes! There is a second box bigger than the first. It went from post office because of cost/size. Everything else is in it. I have the vents if you still need them... One is vacuum operated. The piece you circled goes in the cowl panel at the base of the windshield under that panel. On the firewall side, if I'm not mistaken. It's hard to explain but I'll get you a picture of the hole in the fire wall it went through. You should have everything this truck had on it other than the vents. Please let me know if anythings missing after the second box comes and I'll look for anything else out there but you should have it all.
Mike
Posted via Mobile Device

chewychevy67 · 02-12-2012, 11:34 AM

any exhaust hanger pic's yet?

**Cash3481** · 02-12-2012, 02:57 PM

Quote:

Originally Posted by chewychevy67

any exhaust hanger pic's yet?

Chewychevy67 Pics attached, I forgot to load them. I had to replace the tranny in my 72 this weekend. Mike

chewychevy67 · 02-12-2012, 04:09 PM

I am going to pass on the hangers. I need the pipe clamp parts that are not cut off. Rod.

**Cash3481** · 02-12-2012, 07:44 PM

Quote:

Originally Posted by chewychevy67

I am going to pass on the hangers. I need the pipe clamp parts that are not cut off. Rod.

Sorry they didn't work for you! Have a good night.
Mike
Posted via Mobile Device

DD1 · 02-12-2012, 07:47 PM

Ok, sorry if i am being confusing but I was wrong - the piece that I circled was not in the box. It was another piece that looks a lot like it and I have no idea what either piece is for or where it goes.

I am attaching a photo that shows which I got and didn't get; I still have no idea what either piece does or if I even need them.

Ok, while I could be missing something, the only other things that I am still waiting on and are probably in the 2nd box is the outside heater box, the washer bottle and bracket, and the dome light. I also do need the outer heater box. I said that in my posts, but looking back at them, I can see where I might have been confusing. Is the outer heater box in the 2nd box?

It looks like one of the dash vents that sit on top of the dash cracked in shipping, but not a big deal as I can take that piece off my non-A/C cab.

Sorry for any hassle!

Thanks!

Darien

DD1 · 02-12-2012, 08:02 PM

Ok, this is my last post, I promise. I re-read your response (would have been nice if I had read it properly the first time), and I don't know what vents you are talking about that i did not get. It looks like everything I wanted for inside the cab is in this first box.

Are the vents something I might want to buy? Can you post a pic so I can see what you are talking about?

Thanks!

**Cash3481** · 02-12-2012, 08:32 PM

Quote:

Originally Posted by DD1

Ok, this is my last post, I promise. I re-read your response (would have been nice if I had read it properly the first time), and I don't know what vents you are talking about that i did not get. It looks like everything I wanted for inside the cab is in this first box.

Are the vents something I might want to buy? Can you post a pic so I can see what you are talking about?

Thanks!

Sent you a pm with my phone number.
Posted via Mobile Device

02-07-2012, 11:19 PM	#2
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB Seat belts $35 plus shipping finally got them off retractors are not the best but they are all there. BB PS hoses $35 plus shipping clutch delete plate $15 shipped to the lower 48. Attached Images

02-07-2012, 11:22 PM	#3
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB Additional pics of seatbelt and clutch delete plate. A little fuzzie but nothing wrong with it and I have the hardware too. Attached Images

02-08-2012, 02:58 PM	#4
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,122	Re: parting out 72 GMC LB BB What is the tailgate condition and would you ship it? Have any pics? __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

02-08-2012, 03:54 PM	#6
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,855	Re: parting out 72 GMC LB BB Status on shipping of BB maifolds? thx, D' __________________ 1967 C10 SWB Owner - Rustbelt Restorations

02-08-2012, 04:04 PM	#7
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB DaHos: BB manifolds package shipped USPS today at lunch. (half price through USPS ve UPS). I added $100 insurance for both of us! DD1: One of your packages went ont UPS yesterday and the other went USPS today at lunch. (cost was 2X on the 2d box so I waited until today). I added $100 insurance for both of us! CC_BOB: Intermediate shaft shipped today as well. (Price was 2X through UPS) Please let me know when you receive it. Last edited by Cash3481; 02-08-2012 at 04:05 PM. Reason: Added info

02-10-2012, 07:03 PM	#8
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB Here is the: BB high hump $90 shipped BB fan shroud $90 Shipped 400 Gas pedal $35 plus the ride BB power steering lines 25 plus the ride Clutch delete $15 shipped Let me know if these prices are off or if your intreasted. Attached Images

02-10-2012, 08:36 PM	#9
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,160	Re: parting out 72 GMC LB BB Mike, I'm interested in the clutch delete. Do you have the two attaching hardware bolts/screws ? That is a metal plate correct? Not sure about them since my truck has been a stick shift since I bought it but will be going to auto. If you recall, I got the column from you at the Wichita Swap meet. Enjoyed talking to you. Let me know on the delete plate, you could just put it into a small bubble envelope and drop it in the mail. Total price to Wellington, money order okay ? Don't have a Paypal account. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-11-2012, 02:39 PM	#12
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: parting out 72 GMC LB BB Hey Mike, I was curious to know if you included the part circled in this photo with my package. I did not circle it on the original photos, b/c I did not realize that it is part of the A/C system, at least I think it is based on some of the other posts I have read on here. Could you confirm if it is in fact part of the A/C system and what it is? If you did not send it and it is part of the A/C system, and you still have it, what would it take to get it to me? Sorry about the hassle, but I am not really familiar with the A/C system. thanks, Darien Attached Images

02-11-2012, 04:10 PM	#13
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,678	Re: parting out 72 GMC LB BB Mike, vents and visors came today! thank you for a great deal!

02-12-2012, 05:55 AM	#15
Hard On Parts Registered User Join Date: Dec 2008 Location: Cedar Vale, KS Posts: 145	Re: parting out 72 GMC LB BB Is the inside of that fuel tank clean? Rust free?

02-12-2012, 11:34 AM	#19
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,467	Re: parting out 72 GMC LB BB any exhaust hanger pic's yet?

02-12-2012, 04:09 PM	#21
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,467	Re: parting out 72 GMC LB BB I am going to pass on the hangers. I need the pipe clamp parts that are not cut off. Rod.

02-12-2012, 07:47 PM	#23
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: parting out 72 GMC LB BB Ok, sorry if i am being confusing but I was wrong - the piece that I circled was not in the box. It was another piece that looks a lot like it and I have no idea what either piece is for or where it goes. I am attaching a photo that shows which I got and didn't get; I still have no idea what either piece does or if I even need them. Ok, while I could be missing something, the only other things that I am still waiting on and are probably in the 2nd box is the outside heater box, the washer bottle and bracket, and the dome light. I also do need the outer heater box. I said that in my posts, but looking back at them, I can see where I might have been confusing. Is the outer heater box in the 2nd box? It looks like one of the dash vents that sit on top of the dash cracked in shipping, but not a big deal as I can take that piece off my non-A/C cab. Sorry for any hassle! Thanks! Darien Attached Images

02-12-2012, 08:02 PM	#24
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: parting out 72 GMC LB BB Ok, this is my last post, I promise. I re-read your response (would have been nice if I had read it properly the first time), and I don't know what vents you are talking about that i did not get. It looks like everything I wanted for inside the cab is in this first box. Are the vents something I might want to buy? Can you post a pic so I can see what you are talking about? Thanks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.