OR Parting 1986 Suburban K20 4x4

[DLTruck1973]

Originally Posted by gmcdeadhead

also would you have a 17" clutch fan?

I should have the 2wd sheet metal inspection cover for a 700R4 for $20.00 plus shipping. I also need to know what your application is for the fan. Do you have air? The standard clutch fan for a small motor with no air is 3 blade and the heavy duty blades are 5 blade.

Let me know. I will see what I have and post photos for you.

Thank you,
Thomas

[gmcdeadhead]

dltruck1973 , i sent you a pm.

[DLTruck1973]

Originally Posted by gmcdeadhead

dltruck1973 , i sent you a pm.

PM returned.

Thank you,
Thomas

[AsianBlazer]

Hi Thomas,
Looking for a few parts for a Suburban. First, Drip rail molding stainless above each door plus screws,need all four doors. Next, passenger side rear door glass channel, its the vertical black piece that separates the door glass from the smaller door glass.
I am up in Lake Oswego, zip code 97034.

Thanks, Mike

[DLTruck1973]

Originally Posted by AsianBlazer

Hi Thomas,
Looking for a few parts for a Suburban. First, Drip rail molding stainless above each door plus screws,need all four doors. Next, passenger side rear door glass channel, its the vertical black piece that separates the door glass from the smaller door glass.
I am up in Lake Oswego, zip code 97034.

Thanks, Mike

I should be able to help you Mike. I will see what I have and post some photos and get you some prices.

Thank you for the interest,
Thomas

[junkrat]

I'll take the sway bar brackets with bolts pm phone number and I'll pay with my card again

[DLTruck1973]

Originally Posted by AsianBlazer

Hi Thomas,
Looking for a few parts for a Suburban. First, Drip rail molding stainless above each door plus screws,need all four doors. Next, passenger side rear door glass channel, its the vertical black piece that separates the door glass from the smaller door glass.
I am up in Lake Oswego, zip code 97034.

Thanks, Mike

Hi Mike,

Here is what I have for you.

The four drip rails with screws. Still mounted on the Suburban so I know you will get the correct screws. These are $15.00 each with screws. Also the rear glass channel is for the right rear door and separates the two pieces of glass like you described, that is $20.00. The left front drip rail has a very small ding but otherwise they are all very nice.

Shipping for everything will be $13.00 so you will be at $93.00 total if interested.

Let me know and thank you for the interest,
Thomas

[AsianBlazer]

Thomas,

I am interested, please give me a phone # and time to call, I'll pay by CC to make things easy if that works for you?

[DLTruck1973]

Originally Posted by AsianBlazer

Thomas,

I am interested, please give me a phone # and time to call, I'll pay by CC to make things easy if that works for you?

Hi Mike,

PM on the way.

Thank you,
Thomas

[rajincajintj]

do you still have the driver side door?

what is your price shipped to 70124

[DLTruck1973]

Originally Posted by rajincajintj

do you still have the driver side door?

what is your price shipped to 70124

Do you need one for a power window or manual? I do not have the door from this Suburban but I have others. They are $150.00. It is going to be a minimum of $200.00 to ship so you are looking at $350.00.

If you are interested, we can get exact ship quote and photos.

Thank you,
Thomas

[rajincajintj]

manual locks and windows.

i really need that old faded red one hahah

[JAG123]

I need the frame brackets/perches that hold the engine mounts on.

Specifically for the 4x4 K20. I can find the 2WD versions all day long, but can't find these.

Any pics? Price shipped to 37122

Thanks!

[DLTruck1973]

Originally Posted by JAG123

I need the frame brackets/perches that hold the engine mounts on.

Specifically for the 4x4 K20. I can find the 2WD versions all day long, but can't find these.

Any pics? Price shipped to 37122

Thanks!

Here you go. $40.00 for the pair not including the mounts, just the frame brackets. I can ship for $13.00 so $53.00 total. I will have to pull them. These are not on the 86 K20 Suburban but on a 89 K10 Suburban. They are the same.

Let me know,
Thank you,
Thomas

[JAG123]

Originally Posted by DLTruck1973

Here you go. $40.00 for the pair not including the mounts, just the frame brackets. I can ship for $13.00 so $53.00 total. I will have to pull them. These are not on the 86 K20 Suburban but on a 89 K10 Suburban. They are the same.

Let me know,
Thank you,
Thomas

Thank you for the quick response. The first one pictured seems to have some other stuff attached to it, and is also mounted on the cross member below.. Is that the case? Or is that just the angle of the picture?

Can you tell me the spacing of the bolt holes on top? Is it around 3"?

[DLTruck1973]

Originally Posted by JAG123

Thank you for the quick response. The first one pictured seems to have some other stuff attached to it, and is also mounted on the cross member below.. Is that the case? Or is that just the angle of the picture?

Can you tell me the spacing of the bolt holes on top? Is it around 3"?

Nothing extra bolted on it. However, it does bolt to the cross member on the lower side. The top where the frame mount is has about 2 3/4 spacing between the bolts, if that is what you are asking.

I have about 4-5 of theses K10/20 trucks and suburbans here and they are all look the same.

Let me know,

Thank you,
Thomas

[JAG123]

Originally Posted by DLTruck1973

Nothing extra bolted on it. However, it does bolt to the cross member on the lower side. The top where the frame mount is has about 2 3/4 spacing between the bolts, if that is what you are asking.

I have about 4-5 of theses K10/20 trucks and suburbans here and they are all look the same.

Let me know,

Thank you,
Thomas

Oh Okay. Perfect. I think my cross member was cut where the bottom lines up with the frame mount.. I may have to weld something up there for additional support, what do you think?

Do you have a PayPal? I can send you the money now.
Thanks!

[DLTruck1973]

Originally Posted by JAG123

Oh Okay. Perfect. I think my cross member was cut where the bottom lines up with the frame mount.. I may have to weld something up there for additional support, what do you think?

Do you have a PayPal? I can send you the money now.
Thanks!

Not sure what you have to work with but these will be the correct mounts for the application.

I will send you a PM with payment details.

Thank you,
Thomas

[Justins76]

Hi, I am looking for the wires and connectors from the firewall to the windshield wiper motor shipped priority mail. The most important part are the motor connectors (one is a 3 wire and the other is a 2 wire), I could always put new terminals in them. Thanks

[DLTruck1973]

Originally Posted by Justins76

Hi, I am looking for the wires and connectors from the firewall to the windshield wiper motor shipped priority mail. The most important part are the motor connectors (one is a 3 wire and the other is a 2 wire), I could always put new terminals in them. Thanks

I am sorry but I do not have a bad harness to cut the pigtails from that you need.

Thank you for your interest,
Thomas

[Justins76]

Originally Posted by DLTruck1973

I am sorry but I do not have a bad harness to cut the pigtails from that you need.

Thank you for your interest,
Thomas

Do you have a whole good harness for sale that has the wiper wiring? Thanks

[1985-GMC]

I need the A/C hard line you have pictured in post #139 if it's still intact and not bent.

[DLTruck1973]

Originally Posted by Justins76

Do you have a whole good harness for sale that has the wiper wiring? Thanks

I will need to check for you on Monday.

Thank you for the interest,
Thomas

[DLTruck1973]

Originally Posted by 1985-GMC

I need the A/C hard line you have pictured in post #139 if it's still intact and not bent.

I will need to check that line for you on Monday and make sure it is good. The one in that photo is not from a 86 K20 Suburban, it is from an 84 K10 pickup.

Let me know exactly what you need it for. We have several other trucks that may also have that AC line.

Thank you for the interest,
Thomas

[1985-GMC]

The one I'm talking about is definitely off a suburban with rear A/C. It's in the top picture on the far left with the high pressure port. It has a Y for the liquid line to split off and go to the rear and suburbans are the only ones that had that.