Parting a 71 blazer 4x4 now - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 04-21-2009, 11:07 PM

Justtime520, are you wanting the booster and brackets. I see you've been on the board but you haven't returned my pm? Thanks let me know, Randy

markster5 · 04-22-2009, 09:11 AM

front bumper ,brscket.s and hardwewe ? shiped to 34994 busnes

teeitup · 04-22-2009, 12:18 PM

Markster5, bumper and brackets are sold off this one, sorry
Thanks Randy

69-72 · 06-01-2009, 05:31 PM

Do you have any of those heat riser tubes for a 72 350 and a trim ring for the 4x4 shifter boot?

HuggerCST · 06-02-2009, 08:49 AM

If they are still solid, we'll take them, just let me know how you want to be paid. Thanks

BigMikeBB · 06-02-2009, 05:42 PM

Would the front spring hangers on the rear of the truck be the same as a 67 3/4 ton 4x4 hanger? If so how much shipped to 60085?

Thanks in advance.

teeitup · 06-02-2009, 06:38 PM

Wynne, they are solid. I'll pm you info, Thanks
BigMikeBB, 71-72 hangers are different than 67-70, sorry
Thanks Randy

BigMikeBB · 06-02-2009, 09:07 PM

Thanks for getting back so quick. Now I know a little better what I'm looking for.

14U2NV · 06-09-2009, 10:41 AM

Randy,

What's left of the frame? I need a frame without springs, but with all body brackets and crossmembers (excluding tranny and engine).

Chad

BigMikeBB · 06-09-2009, 01:57 PM

How much for all 8 spring mounts shipped to 60085 I've got an exrta short bed frame I want to try and convert.

teeitup · 06-09-2009, 05:08 PM

14u2nv, no problem I'll let you know
BigMikeBB, The only spring mounts I have left are the very front ones
Thanks Randy

Blazing72 · 06-22-2009, 10:01 PM

How much for the original blazer seat tracks only. Thanks CLM

Quote:

Originally Posted by teeitup

Just got this in last night, I will start parting it next week, since I'm going to be gone most of the day Sat, driving to Sioux City Nebraska to get a 72 longhorn BB to part out (woohoo 9 hours of driving time) and Sun is family day

Has a factory tilt but it needs rebuilt, a little loose and wires have been spliced $225 shipped. ALL BODY IS TRASH.
Outer grill is a good driver quality, a few dings and quite a few scratches.
$75 NO SHIP
inner grill has one spot cracked on it $50, no ship
Automatic high hump $30 plus shipping
205 Shifter and linkage $40 plus ship
Only has one original bucket seat
console $40 plus ship, one crack and a couple drill holes
PS pump and brackets $40 plus ship
ALT brackets $30 shipped
shroud
Has the skid plate option on it
SEE ANYTHING ELSE YOU NEED ASK
Ask questions in thread. Money orders or pay pal. Thanks Randy

NorCalTank · 06-23-2009, 11:18 PM

Randy - I need the rear frame horns that attach to the bumper. Length from the end needs to be about 6-8".

k5hunter · 06-28-2009, 01:19 PM

I'm looking for the plastic pieces that fit over the driver and passenger vent windows.

jmmm229 · 06-28-2009, 04:01 PM

will you cut a piece out of the left 1/4? i need a tail light bucket

68,69 K20 · 06-28-2009, 05:04 PM

Randy, I'm interested in the ps box and pitman arm. Do you also have the shaft that connects from the rag joint to the steering column?

teeitup · 06-29-2009, 12:35 PM

k5hunter, sorry been sold
jimmm229, are you needing a section off the quarter panel, if so sorry the bed piece has been sent to scrap. I answered in another thread about a taillight bucket, thats the piece the taillight lens screws in
68,69 K20, Mike yes I have that steering section too. $70 shipped for box, pitman arm and shaft
Thanks Randy

68,69 K20 · 06-29-2009, 04:21 PM

Quote:

Originally Posted by teeitup

I have that steering section too. $70 shipped for box, pitman arm and shaft
Thanks Randy

Randy, I'll take it...Pm on the way...

GunRunner · 06-29-2009, 04:27 PM

Hello, I have read every thread dealing with front drum to disc conversions and honestly can't come to any conclusions on how to proceed. I have a 69 C10 4WD (it seems all of the threads deal with 2wds), are the parts I need for this conversion available in what you are parting out? If so will they bolt right in without worries or modification?

68,69 K20 · 06-30-2009, 05:35 PM

Paypal sent for the steering stuff, thanks again Randy!!

portugee14 · 07-06-2009, 06:41 PM

Hey could you pm me your number and will you be around this sat I would like to come get the grill and some other parts I saw in you parts posts. what you asking for the complete grille I I come get it his weekend?

BurnoutNova · 07-06-2009, 08:04 PM

Hey Randy... I didnt read through all the posts and can't rell from the engine pic, but is the dipstick the correct one for a 4x4? I'm looking for one for my K10.

Thanks

chevyboy55 · 07-06-2009, 10:21 PM

teeitup
I'm too lazy too read 9 pages of posts,do you still have the alt. brackets?

glimmertwin01 · 07-06-2009, 11:03 PM

this is like crack for us truck guys!

04-21-2009, 11:07 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 71 blazer 4x4 now Justtime520, are you wanting the booster and brackets. I see you've been on the board but you haven't returned my pm? Thanks let me know, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-22-2009, 09:11 AM	#2
markster5 Registered User Join Date: Jan 2009 Location: stuart florida Posts: 59	Re: Parting a 71 blazer 4x4 now front bumper ,brscket.s and hardwewe ? shiped to 34994 busnes

04-22-2009, 12:18 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 71 blazer 4x4 now Markster5, bumper and brackets are sold off this one, sorry Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-01-2009, 05:31 PM	#4
69-72 Registered User Join Date: May 2008 Location: 204 Posts: 903	Re: Parting a 71 blazer 4x4 now Do you have any of those heat riser tubes for a 72 350 and a trim ring for the 4x4 shifter boot? __________________ 1969 Chevy Custom Camper 3/4 ton Rust free survivor 1972 Chevy Blazer CST 4x4 Almost Rust free survivor 1972 GMC Jimmy 2wd Undergoing surgery

06-02-2009, 08:49 AM	#5
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Parting a 71 blazer 4x4 now If they are still solid, we'll take them, just let me know how you want to be paid. Thanks __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

06-02-2009, 05:42 PM	#6
BigMikeBB Registered User Join Date: Apr 2008 Location: Waukegan Illinois 60085 Posts: 15	Re: Parting a 71 blazer 4x4 now Would the front spring hangers on the rear of the truck be the same as a 67 3/4 ton 4x4 hanger? If so how much shipped to 60085? Thanks in advance. __________________ 67 Short Bed Step Side 80 1 ton standard cab srw 4x4 Silverado 95 Z/28 t-tops 6 speed

06-02-2009, 06:38 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 71 blazer 4x4 now Wynne, they are solid. I'll pm you info, Thanks BigMikeBB, 71-72 hangers are different than 67-70, sorry Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-02-2009, 09:07 PM	#8
BigMikeBB Registered User Join Date: Apr 2008 Location: Waukegan Illinois 60085 Posts: 15	Re: Parting a 71 blazer 4x4 now Thanks for getting back so quick. Now I know a little better what I'm looking for. __________________ 67 Short Bed Step Side 80 1 ton standard cab srw 4x4 Silverado 95 Z/28 t-tops 6 speed

06-09-2009, 10:41 AM	#9
14U2NV Registered User Join Date: Mar 2002 Location: Midlothian, Tx Posts: 156	Re: Parting a 71 blazer 4x4 now Randy, What's left of the frame? I need a frame without springs, but with all body brackets and crossmembers (excluding tranny and engine). Chad

06-09-2009, 01:57 PM	#10
BigMikeBB Registered User Join Date: Apr 2008 Location: Waukegan Illinois 60085 Posts: 15	Re: Parting a 71 blazer 4x4 now How much for all 8 spring mounts shipped to 60085 I've got an exrta short bed frame I want to try and convert. __________________ 67 Short Bed Step Side 80 1 ton standard cab srw 4x4 Silverado 95 Z/28 t-tops 6 speed

06-09-2009, 05:08 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 71 blazer 4x4 now 14u2nv, no problem I'll let you know BigMikeBB, The only spring mounts I have left are the very front ones Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-23-2009, 11:18 PM	#13
NorCalTank Registered User Join Date: Aug 2007 Location: South GA Posts: 72	Re: Parting a 71 blazer 4x4 now Randy - I need the rear frame horns that attach to the bumper. Length from the end needs to be about 6-8".

06-28-2009, 01:19 PM	#14
k5hunter Registered User Join Date: Jun 2009 Location: Dallas, TX Posts: 1	Re: Parting a 71 blazer 4x4 now I'm looking for the plastic pieces that fit over the driver and passenger vent windows.

06-28-2009, 04:01 PM	#15
jmmm229 Registered User Join Date: Jul 2005 Location: victoria texas Posts: 114	Re: Parting a 71 blazer 4x4 now will you cut a piece out of the left 1/4? i need a tail light bucket __________________ 72 GMC Suburban (former ambulance), soon to be set atop a 2009 SIERRA K2500 chassis w/6.0L&4L80E

06-28-2009, 05:04 PM	#16
68,69 K20 They call me the Breeze... Join Date: Jul 2007 Location: New York Posts: 2,251	Re: Parting a 71 blazer 4x4 now Randy, I'm interested in the ps box and pitman arm. Do you also have the shaft that connects from the rag joint to the steering column? __________________ Mike 69 K20 "Beer is proof God loves us and wants us to be happy"....Ben Franklin



Register or Log In To remove these advertisements.

06-29-2009, 12:35 PM	#17
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 71 blazer 4x4 now k5hunter, sorry been sold jimmm229, are you needing a section off the quarter panel, if so sorry the bed piece has been sent to scrap. I answered in another thread about a taillight bucket, thats the piece the taillight lens screws in 68,69 K20, Mike yes I have that steering section too. $70 shipped for box, pitman arm and shaft Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-29-2009, 04:27 PM	#19
GunRunner Registered User Join Date: Jan 2007 Location: Sandy, Utah Posts: 3	Re: Parting a 71 blazer 4x4 now Hello, I have read every thread dealing with front drum to disc conversions and honestly can't come to any conclusions on how to proceed. I have a 69 C10 4WD (it seems all of the threads deal with 2wds), are the parts I need for this conversion available in what you are parting out? If so will they bolt right in without worries or modification?

06-30-2009, 05:35 PM	#20
68,69 K20 They call me the Breeze... Join Date: Jul 2007 Location: New York Posts: 2,251	Re: Parting a 71 blazer 4x4 now Paypal sent for the steering stuff, thanks again Randy!! __________________ Mike 69 K20 "Beer is proof God loves us and wants us to be happy"....Ben Franklin

07-06-2009, 06:41 PM	#21
portugee14 Registered User Join Date: Nov 2007 Location: Hanford, Ca Posts: 29	Re: Parting a 71 blazer 4x4 now Hey could you pm me your number and will you be around this sat I would like to come get the grill and some other parts I saw in you parts posts. what you asking for the complete grille I I come get it his weekend?

07-06-2009, 08:04 PM	#22
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	Re: Parting a 71 blazer 4x4 now Hey Randy... I didnt read through all the posts and can't rell from the engine pic, but is the dipstick the correct one for a 4x4? I'm looking for one for my K10. Thanks

07-06-2009, 10:21 PM	#23
chevyboy55 Senior Member Join Date: Aug 2004 Location: Kelso,Wa Posts: 3,637	Re: Parting a 71 blazer 4x4 now teeitup I'm too lazy too read 9 pages of posts,do you still have the alt. brackets? __________________ Great minds think alike,So do ours

07-06-2009, 11:03 PM	#24
glimmertwin01 Registered User Join Date: Mar 2008 Location: Rochester NY Posts: 1,022	Re: Parting a 71 blazer 4x4 now this is like crack for us truck guys! __________________ 67/68 K/20 "The BEAST" 68 K15 V6 LWB. 73 K20 GMC Burb "The Bomber" 74 K/5 74 K20 Custom Deluxe 86 K10 Shorty 92 K2500 Burb 95 K2500 GMC Life is what you make it Live each day like it was your last Old GM Trucks never go out of style

Register or Log In To remove these advertisements.