'72 Frame Up Rebuild

[47thriftmaster]

Definitely looks better, nice work.

[Luba]

Nice where did you get those LED's?

[d.garza9]

Really like the smoke look!! Where did you get the LED's??

[scoyote]

I bought those on eBay

http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWNX%3AIT

There is a guy here that sells them but I couldn't seem to get his attention after repeated tries.....so I went to eBay.

They seem to be good quality.....so far.

[my90k5]

That tire looks sharp on the back of that truck, perfect height.
Posted via Mobile Device

[72blazer_mud_bogger]

can I see some pics of the bumper being built I am trying to do the same thing with mine, nice built btw

[scoyote]

I'm taking out those 2004 chevy seats, it was just too crowded on the roll bar and I had to shim the seats crooked after I padded the roll bar....so...they are gone.

Now I have another issue....of course

I put in the original seat brackets and when I put the seat on top of them it just seems way to high off the floor.

These are seats from a 2001 Jeep Wrangler. They are comfortable and 4 inches narrower than the chevy seats. Plus I might be able to make the original passenger seat brackets work for a fold up entry again....that would be nice.

I've got right at 15 inches to the top of the seat at the front of the seat and 13 inches at the back of the seat (where the butts is)

What is factory height or a "comfortable" seat height?

I can cut down the factory bracket braces and weld a piece to them (gotta put something across there to carry the jeep seat anyway) and right now that seems like what I'm going to have to do.

Sure wish I didn't paint them first......dang....seem to do almost everything twice most of the time.....sigh

Can someone help me out with some numbers please?

(adding a couple photos of the "new" interior.....redid the door panels and added something at the kick panels)

[jaros44sr]

i can give you what a utility seat measures at when i get home tonight. im 6' it it feels comfortable with my seats

[-Greg72]

"Comfort" is all relative....

I wouldn't say that the factory did a very good job setting up the seat rails or heights, and with a fixed-back seat you're more likely to be uncomfortable, than comfortable.

I'm only 5'9" and I'm amazed at how little adjustment there is in the factory seat slides. I set the seat in the rearmost position to get the pedals a normal distance away and to get a slight bend in my arms on the steering wheel. I can't imagine how someone 6' or taller gets in there without feeling like they're in a coach-class airline seat!

My plan is to modify the stock seatrails so that I can move the seat back all the way to the "step" in the rear floor... then play around with the rake of the seat and the height to give me decent sightlines out the windshield and head clearance around the rollcage. Once that's all established, I'll cut,weld and modify the stock frames until they put the seat where I want it. Then I'll modify the passenger seat mounts to match the driver's side visually.

Seat rails are cheap....I'd just do what makes you comfortable in there and worry less about what "factory" was. IMHO


-G

[scoyote]

That would be great. I'm 6' tall also so if it's a comfortable height for you it should work for me too.

[jaros44sr]

Originally Posted by scoyote

That would be great. I'm 6' tall also so if it's a comfortable height for you it should work for me too.

12" and 10" directly above the mounting holes, to the floor

dont forget my mounting holes are about 15" apart for the utility seats

youre about 3" to tall on your mount

[scoyote]

Yep.....felt like it was way too tall.

OK....now I gotta tweak the brackets.

Thanks for the numbers Jaros.

I agree Greg72......now it's time to do exactly that.

"Factory" went out the window a long time ago ;-)

[jaros44sr]

as it sits right now, the seat could go back 2" before it hits the step up. but as it is, it feels "comfortable" to me. these seats are wide, compared to the factory buckets, and i think that is where the comfort comes in. i can move my arse side to side, for those long trips!

once i install my tilt, that should give me the last adjustment i need

btw, the interior upgrades look great. the two tones of grey go well with the exterior color

if you fool with existing seat brackets, you may have to use rivets for the mechanism to work, (clearance). dunno

good luck, and keep the pics coming

[scoyote]

I like the color combination too.....can't wait to get these seats installed then I'm almost done for awhile ;-)

I'm gonna play around with the factory brackets over the weekend and see what I can come up with.

I'm thinking of drilling out the existing brackets and fabbing new ones that will work with the jeep seat.

Was hoping to just use a good self tapping #10 or #12 screw to hold the brackets.....gotta see what kind of clearance there is between the bottom of the bracket and the top of the slide......and go from there.

[Fw190d9]

Scoyote, where did you get the grill you put on the blazer? Im doing a similar project and like the looks of it.
Also, you said you were building a model airplane back in the thread somewhere, what kind of kit?
Thanks
Evan Q.

[scoyote]

FW190d9 - that is the later version of the Focke Wolfe with the longer nose isn't it?

I'm building an old Royal kit and it's a FW190-A8.

I don't have any recent photos but here is one to give you an idea of what it looks like. I've pretty much got it ready for paint right now except for some details that need to be finished up like linkage horns...small stuff.

I can't remember where I got that grille but it was from one of the vendors here. I'll see if I can dig up some receipts and figure it out.

[Fw190d9]

Nice A model you have there. I flew mine plus a few others up your way last september at Warbirds over the Rockies. Here is a pic of mine:
Its 1/4 scale with a 100" wingspan.

More pics on my webpage:

http://www.evoshangar.com

[scoyote]

Very nice......like the paint scheme. I'm still looking at schemes. Kinda want to find one from JG-26 (yellow nosed bastards).

Mine is about 1/2 that size. Wingspan if just over 5 feet. Can't imagine finding the room to build one the size of yours!

I like the way you flared the cowl.

Have you ever visited this website:
http://www.rcuniverse.com

http://www.rcuniverse.com/forum/m_56..._1/key_/tm.htm

[Fw190d9]

Originally Posted by scoyote

Have you ever visited this website:
http://www.rcuniverse.com

http://www.rcuniverse.com/forum/m_56..._1/key_/tm.htm

Of course, Ive been a member since the site started.

FW190D9 on there also.

So are the Jeep seats working out better? I need to come up with a good seat for the 69 blazer im working on.

Evan Q.

[Sacramento70]

just curious...why didn't you bring the kick panel covers all the way up to the bottom of the dash? love the new interior man i wish my blazer was that nice

[scoyote]

Yea, I was wondering why they didn't do that too.

I'm going to be asking them that same question.

Frankly I was out of town when it was done and my wife picked it up so I didn't see it until after it was back at home.

Figured I'd get the seats in and then drive it back down there and let them do it right this time.

[Sacramento70]

yea i made my own for like $25 and some extra wood i had around i think all the way to the dash is the way to go...heres a pic sorry if im stepping on your thread just thought id share

[scoyote]

Yep.....that is the way to go. I chatted with the upholstery shop and asked him why he stopped at the vent and he didn't have a good answer. I'll take it back to him after I get done fabbing the seat rails.

[Chulisohombre]

Cool truck
And nice work.