Project Patina Burb - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

woodridge · 01-17-2013, 01:07 AM

B, a 4wd shroud is longer, that might work if you could find one.

SCHRUMGMC · 01-17-2013, 06:04 AM

Great progress man, I hope to be as good as you are one day

5150 · 01-17-2013, 06:08 AM

Woody, the fan doesn't line up, so I don't think it would matter. A buddy if mine gave me a dual fan setup, I think I can make it work.
Posted via Mobile Device

5150 · 01-21-2013, 12:01 PM

Decided to tackle taking off the tint on two of my windows today. The two front windows are out of it, the third door window and the fourth window are still in it, and the back windows are out of it also.

It was pretty time consuming, especially for a guy with no patience, but it came off. I think the two windows that are in the burb will be much easier because I won't have to hold the glass up. You need three hands to do it that way.

I then hit both windows with a little Goo Gone and spread it around and I'm letting it sit on them for a while.

5150 · 01-21-2013, 02:43 PM

just knocked out the third door window and smeared it with Goo Gone. It was much easier because it's installed. The little side window gave more fight.

5150 · 01-21-2013, 04:16 PM

There's something on the front windows on the outside that I can't get off. It's specks of something. Obviously, I tried the Goo Gone and also paint thinner. I don't know what it is. I guess I'll go to the store and get some brand new razors for my scraper.

I also shot some more blue inside the burb to cover up the blueish/purple the PO sprayed it with. Looks good so far.

5150 · 01-21-2013, 04:17 PM

There's something on the front windows on the outside that I can't get off. It's specks of something. Obviously, I tried the Goo Gone and also paint thinner. I don't know what it is. I guess I'll go to the store and get some brand new razors for my scraper.

I also shot some more blue inside the burb to cover up the blueish/purple the PO sprayed it with. Looks good so far.

BB72CHEVKT · 01-21-2013, 05:36 PM

Quote:

Originally Posted by 5150

There's something on the front windows on the outside that I can't get off. It's specks of something. Obviously, I tried the Goo Gone and also paint thinner. I don't know what it is. I guess I'll go to the store and get some brand new razors for my scraper.

I also shot some more blue inside the burb to cover up the blueish/purple the PO sprayed it with. Looks good so far.

nice build! be careful with the razors my burb had purple tint all over it and it came off easy with razor blades but when cleaning the windows yesterday i realized I scratched the hell out of them

*project 67 sub* · 01-23-2013, 11:52 PM

yah i scratched the hell out of mine too when i removed the purple tint to replace it with limo tint 7 years ago

aggie91 · 01-25-2013, 06:40 PM

This one is looking good too. I really wouldl like to get me an 67-72 Burb and get rid of my van....

5150 · 01-27-2013, 11:34 PM

I'm almost done shooting all of the interior with that blue. Only thing left is the third door. I got the dash pad installed and placed the second row seat in just to see what it would look like. I've also decided to go with a front bench seat instead of the 99-06 buckets. My wife and I just thought it would look better and go with the theme of the burb. I know those buckets will be very comfortable, but will sacrafice for a little better style.

I now feel like a complete tool because I got rid of the 2nd row and the front bench when I bought it. I've already had to purchase another 2nd row and now will have to find a decent front bench.

BB72CHEVKT · 01-28-2013, 11:45 AM

Good choice on the seat.

Number98 · 01-28-2013, 05:41 PM

Quote:

Originally Posted by BB72CHEVKT

Good choice on the seat.

Yea, I think the original benches will match the look of your Burb.... especially if you go with a set of those 20" steelies!

jtj143 · 01-28-2013, 09:20 PM

Bryan, is the front Suburban bench seat the same as the truck bench seat? Just curious - I don't have any spare seats lying around...

5150 · 01-28-2013, 10:05 PM

Josh, yes they are the same.
Posted via Mobile Device

72MARIO · 02-01-2013, 09:20 AM

Laquer thinners is my favorite for removing window tint goo.

5150 · 02-04-2013, 11:02 PM

Bought a 71 plate off eBay tonight. It's the yellow one on the left. Not sure what I'll do with the other ones. Don't have much use for them. There is a 71 dealer tag in the bunch.

Posted via Mobile Device

Rusbuilt · 02-04-2013, 11:12 PM

Cool! I like the dealer tag too, it sucks its not in better shape.

cubber · 02-04-2013, 11:42 PM

I like the tags.

5150 · 02-07-2013, 08:42 PM

My wife is out of town so with two little kids I'm not getting alot done, but I was able to get out in the garage and pain the inside of the hatch.

Rusbuilt · 02-07-2013, 08:45 PM

oh! I see the 22s are off! I think we need a pic of the burb with whatever rollers you have on it! lol

5150 · 02-07-2013, 08:49 PM

It's just got some ralleys on it right now.

cubber · 02-08-2013, 01:35 AM

I like painting, it always makes me feel like I'm gettingvsomewhere. Yours looks good!

5150 · 02-08-2013, 01:37 AM

Yes, I agree. I do feel like I'm making progress.
Posted via Mobile Device

cubber · 02-08-2013, 01:47 AM

hopefully you'll make a lot more next sat!

01-17-2013, 01:07 AM	#126
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: Project Patina Burb B, a 4wd shroud is longer, that might work if you could find one. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

01-17-2013, 06:04 AM	#127
SCHRUMGMC Registered User Join Date: Dec 2012 Location: North Carolina Posts: 4,989	Re: Project Patina Burb Great progress man, I hope to be as good as you are one day __________________ 1971 GMC Sierra 1959 GMC 100

01-17-2013, 06:08 AM	#128
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb Woody, the fan doesn't line up, so I don't think it would matter. A buddy if mine gave me a dual fan setup, I think I can make it work. Posted via Mobile Device __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-21-2013, 12:01 PM	#129
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb Decided to tackle taking off the tint on two of my windows today. The two front windows are out of it, the third door window and the fourth window are still in it, and the back windows are out of it also. It was pretty time consuming, especially for a guy with no patience, but it came off. I think the two windows that are in the burb will be much easier because I won't have to hold the glass up. You need three hands to do it that way. I then hit both windows with a little Goo Gone and spread it around and I'm letting it sit on them for a while. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-21-2013, 02:43 PM	#130
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb just knocked out the third door window and smeared it with Goo Gone. It was much easier because it's installed. The little side window gave more fight. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-21-2013, 04:16 PM	#131
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb There's something on the front windows on the outside that I can't get off. It's specks of something. Obviously, I tried the Goo Gone and also paint thinner. I don't know what it is. I guess I'll go to the store and get some brand new razors for my scraper. I also shot some more blue inside the burb to cover up the blueish/purple the PO sprayed it with. Looks good so far. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-21-2013, 04:17 PM	#132
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb There's something on the front windows on the outside that I can't get off. It's specks of something. Obviously, I tried the Goo Gone and also paint thinner. I don't know what it is. I guess I'll go to the store and get some brand new razors for my scraper. I also shot some more blue inside the burb to cover up the blueish/purple the PO sprayed it with. Looks good so far. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-23-2013, 11:52 PM	#134
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Project Patina Burb yah i scratched the hell out of mine too when i removed the purple tint to replace it with limo tint 7 years ago

01-25-2013, 06:40 PM	#135
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Project Patina Burb This one is looking good too. I really wouldl like to get me an 67-72 Burb and get rid of my van.... __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

01-27-2013, 11:34 PM	#136
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb I'm almost done shooting all of the interior with that blue. Only thing left is the third door. I got the dash pad installed and placed the second row seat in just to see what it would look like. I've also decided to go with a front bench seat instead of the 99-06 buckets. My wife and I just thought it would look better and go with the theme of the burb. I know those buckets will be very comfortable, but will sacrafice for a little better style. I now feel like a complete tool because I got rid of the 2nd row and the front bench when I bought it. I've already had to purchase another 2nd row and now will have to find a decent front bench. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-28-2013, 11:45 AM	#137
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: Project Patina Burb Good choice on the seat. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

01-28-2013, 09:20 PM	#139
jtj143 Registered User Join Date: Jun 2010 Location: Dotsonville, Tennessee Posts: 194	Re: Project Patina Burb Bryan, is the front Suburban bench seat the same as the truck bench seat? Just curious - I don't have any spare seats lying around... __________________ '65 GMC Suburban 4X4, '71 GMC 4X4 LWB - The Yellow Eyed Monster, '86 C10 Silverado - Oldest Daughter's Pickup, '88 S15 GMC Work Truck, '95 GMC SLE 4X4 - Second Daughter's Truck, '99 K1500 GMC Suburban Road Trip Machine, 2000 C2500 W/T Utility Bed Work Truck, '03 Silverado - Wife's Grocery Getter

01-28-2013, 10:05 PM	#140
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb Josh, yes they are the same. Posted via Mobile Device __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

02-01-2013, 09:20 AM	#141
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Re: Project Patina Burb Laquer thinners is my favorite for removing window tint goo. __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

02-04-2013, 11:02 PM	#142
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb Bought a 71 plate off eBay tonight. It's the yellow one on the left. Not sure what I'll do with the other ones. Don't have much use for them. There is a 71 dealer tag in the bunch. Posted via Mobile Device __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4



Register or Log In To remove these advertisements.

02-04-2013, 11:12 PM	#143
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project Patina Burb Cool! I like the dealer tag too, it sucks its not in better shape. __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

02-04-2013, 11:42 PM	#144
cubber Registered User Join Date: Mar 2012 Location: Leanna, TN Posts: 2,061	Re: Project Patina Burb I like the tags. __________________ =MATTHEW 69 Stepper...Stroked & Bagged GONE BUT NOT FORGOTTEN 2003 Chevrolet Z71 Ext. Cab 1995 Cavalier gas saver!

02-07-2013, 08:42 PM	#145
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb My wife is out of town so with two little kids I'm not getting alot done, but I was able to get out in the garage and pain the inside of the hatch. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

02-07-2013, 08:45 PM	#146
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project Patina Burb oh! I see the 22s are off! I think we need a pic of the burb with whatever rollers you have on it! lol __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

02-07-2013, 08:49 PM	#147
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb It's just got some ralleys on it right now. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

02-08-2013, 01:35 AM	#148
cubber Registered User Join Date: Mar 2012 Location: Leanna, TN Posts: 2,061	Re: Project Patina Burb I like painting, it always makes me feel like I'm gettingvsomewhere. Yours looks good! __________________ =MATTHEW 69 Stepper...Stroked & Bagged GONE BUT NOT FORGOTTEN 2003 Chevrolet Z71 Ext. Cab 1995 Cavalier gas saver!

02-08-2013, 01:37 AM	#149
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Project Patina Burb Yes, I agree. I do feel like I'm making progress. Posted via Mobile Device __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

02-08-2013, 01:47 AM	#150
cubber Registered User Join Date: Mar 2012 Location: Leanna, TN Posts: 2,061	Re: Project Patina Burb hopefully you'll make a lot more next sat! __________________ =MATTHEW 69 Stepper...Stroked & Bagged GONE BUT NOT FORGOTTEN 2003 Chevrolet Z71 Ext. Cab 1995 Cavalier gas saver!

Register or Log In To remove these advertisements.