How about some pics of bagged 60-66 - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kerlijah · 06-04-2012, 03:26 PM

Dino, you are insane!! Keep up the awesome work man, it's inspiring!!

zippeay · 06-05-2012, 11:04 AM

Ok guys I've been searching forever but I can't seem to find an answer. I'm laying my truck out and I want to keep the front inner fenders because I plan on driving this a lot. Obviously I need to notch the inner fenders but if I do that then I won't be able to use the stock hood hinges. I would buy the porter built hinges but from what I can tell from the pictures is that you can't run A/C if you use those hinges right? So does anyone have a pictures of someone that has notched the stock the inner fenders and kept the orginal hinges? I noticed the KNAS-N looks like he has kept the inner fenders. I would really appreciate any help, I'm getting really close to where I have to figure this part out. Oh, and I'm only running 15" wheels, Thanks!

Malibob · 06-05-2012, 11:14 AM

Quote:

Originally Posted by zippeay

Ok guys I've been searching forever but I can't seem to find an answer. I'm laying my truck out and I want to keep the front inner fenders because I plan on driving this a lot. Obviously I need to notch the inner fenders but if I do that then I won't be able to use the stock hood hinges. I would buy the porter built hinges but from what I can tell from the pictures is that you can't run A/C if you use those hinges right? So does anyone have a pictures of someone that has notched the stock the inner fenders and kept the orginal hinges? I noticed the KNAS-N looks like he has kept the inner fenders. I would really appreciate any help, I'm getting really close to where I have to figure this part out. Oh, and I'm only running 15" wheels, Thanks!

I would start a thread on that one. My tires go up to high to have inners on mine- even with a 15" wheel. The tire size is more important. My hinges and mounts are modified OE hinges, no springs which sucks but it still works. Post an inner fender thread for it and you may get more help.

zippeay · 06-05-2012, 11:58 AM

Thanks! I guess I can try to make it work with the OE hinges and just use a prop rod. I'll ask the question and see what happens.

richards72chevy · 06-12-2012, 08:30 PM

Name: 577663_10150843052709249_101228694248_9537250_107219626_n.jpg
Views: 20590
Size: 101.4 KB

64shortc10 · 06-12-2012, 08:48 PM

^^^awesome truck! I wondered what happened to that one!
Here is a link on the build.
http://67-72chevytrucks.com/vboard/s...d.php?t=284880
Tony from Norcal
Posted via Mobile Device

Dustin07 · 08-06-2012, 03:34 PM

Quote:

Originally Posted by richards72chevy

Attachment 940579

moar?

Malibob · 06-12-2012, 09:27 PM

That truck is sick. I finally got my rides both at the same place for once. Snapped a couple of shots...

DSC_3241(2) by Malibob, on Flickr

DSC_3251(2) by Malibob, on Flickr

Not great shots but too much other stuff to get done.

SBTork · 06-13-2012, 06:52 PM

Quote:

Originally Posted by Malibob

That truck is sick. I finally got my rides both at the same place for once. Snapped a couple of shots...

DSC_3241(2) by Malibob, on Flickr

DSC_3251(2) by Malibob, on Flickr

Not great shots but too much other stuff to get done.

They are great shots! Those are two vehicles that I would LOVE to have, you have good taste my friend!

coulter · 06-19-2012, 07:58 AM

always loved ur truck Malibob!!! now i love ur car too

Malibob · 06-19-2012, 08:50 AM

Thanks guys, trying to get a new bed put in it here by the end of the week- my job has other plans for me though. There has been a lot of bad a$$ trucks posted on here recently, lets keep em coming.

dbomb53 · 06-19-2012, 10:38 AM

Quote:

Originally Posted by Malibob

Thanks guys, trying to get a new bed put in it here by the end of the week- my job has other plans for me though. There has been a lot of bad a$$ trucks posted on here recently, lets keep em coming.

2 killer rides..niiiice.

creep · 06-19-2012, 09:03 PM

Quote:

Originally Posted by Malibob

Thanks guys, trying to get a new bed put in it here by the end of the week- my job has other plans for me though. There has been a lot of bad a$$ trucks posted on here recently, lets keep em coming.

Any plans to take it to Steel Valley Nats this weekend? I am gonna go for the day on Sat. Don't know yet about going into the actual show as I have heard that Salem is like a big cruise-in all weekend.

Malibob · 06-19-2012, 09:37 PM

Quote:

Originally Posted by creep

Any plans to take it to Steel Valley Nats this weekend? I am gonna go for the day on Sat. Don't know yet about going into the actual show as I have heard that Salem is like a big cruise-in all weekend.

Thats what I wanted the bed done for. Now I got to go to Chicago on Thurs. so probably wont get done. Not sure if I am going to take the Bel Air or the Truck at this point but plan on going Saturday night most likely. Not during the day.

scot 6 feet eleven · 06-21-2012, 01:39 PM

its hard to get it really low with 24's

Narxoleptic Customs · 06-21-2012, 06:20 PM

That looks awesome!!!
Posted via Mobile Device

LostMy65 · 06-21-2012, 08:47 PM

Yes, Skillfully done.
Posted via Mobile Device

LostMy65 · 06-22-2012, 10:30 PM

Posted via Mobile Device

3rd Coast Z · 07-04-2012, 09:28 AM

Here are a couple more pics. Finally got the dash put together and have actually driven her around a little bit.

LostMy65 · 07-04-2012, 01:08 PM

Quote:

Originally Posted by 3rd Coast Z

Here are a couple more pics. Finally got the dash put together and have actually driven her around a little bit.

Cool Pics.
Posted via Mobile Device

Dustin07 · 07-05-2012, 11:55 AM

Quote:

Originally Posted by 3rd Coast Z

I thought a pc of cardboard was stuck to my computer screen before it scrolled away lol
!!!!

1Bad62Pro/Street · 07-10-2012, 09:14 AM

http://www.sporttruck.com/featuredve...uck/index.html

3rd Coast Z · 07-04-2012, 09:29 AM

Dont laugh but here is my modernly classic instrument panel.

LostMy65 · 07-04-2012, 01:06 PM

Quote:

Originally Posted by 3rd Coast Z

Dont laugh but here is my modernly classic instrument panel.

Did you find a fuel guage that works with the stock gas tank sender, or do you have a modified sender?
Posted via Mobile Device

3rd Coast Z · 07-04-2012, 10:32 PM

Quote:

Originally Posted by LostMy65

Did you find a fuel guage that works with the stock gas tank sender, or do you have a modified sender?
Posted via Mobile Device

I am using a tank out of a 66 VW and came across an old but unused autometer sending unit that fit perfectly in the tank. I checked the full/empty ohms with my ohm reader thingy and ordered an equus gauge accordingly.

06-04-2012, 03:26 PM	#1
Kerlijah Registered User Join Date: Feb 2011 Location: Boise, ID Posts: 293	Re: How about some pics of bagged 60-66 Dino, you are insane!! Keep up the awesome work man, it's inspiring!! __________________ ~Wooden Indian~ 1979 C10 SWB, shaved bed rails, drip rails, tailgate handle. 350 w/ Comp cam, hydraulic lifters, Edelbrock Performer intake, Edelbrock 650 carb, Flowtech headers, Flowmaster 40s, turbo 350 w/stage 2 shift kit...so much fun!

06-05-2012, 11:04 AM	#2
zippeay Registered User Join Date: Mar 2012 Location: Hooper Ut Posts: 466	Re: How about some pics of bagged 60-66 Ok guys I've been searching forever but I can't seem to find an answer. I'm laying my truck out and I want to keep the front inner fenders because I plan on driving this a lot. Obviously I need to notch the inner fenders but if I do that then I won't be able to use the stock hood hinges. I would buy the porter built hinges but from what I can tell from the pictures is that you can't run A/C if you use those hinges right? So does anyone have a pictures of someone that has notched the stock the inner fenders and kept the orginal hinges? I noticed the KNAS-N looks like he has kept the inner fenders. I would really appreciate any help, I'm getting really close to where I have to figure this part out. Oh, and I'm only running 15" wheels, Thanks!

06-05-2012, 11:58 AM	#4
zippeay Registered User Join Date: Mar 2012 Location: Hooper Ut Posts: 466	Re: How about some pics of bagged 60-66 Thanks! I guess I can try to make it work with the OE hinges and just use a prop rod. I'll ask the question and see what happens.

06-12-2012, 08:30 PM	#5
richards72chevy Registered User Join Date: Dec 2010 Location: konawa ok/oakdale Ca. Posts: 1,652	Re: How about some pics of bagged 60-66

06-12-2012, 08:48 PM	#6
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: How about some pics of bagged 60-66 ^^^awesome truck! I wondered what happened to that one! Here is a link on the build. http://67-72chevytrucks.com/vboard/s...d.php?t=284880 Tony from Norcal Posted via Mobile Device

06-12-2012, 09:27 PM	#8
Malibob Registered User Join Date: May 2009 Location: Pittsburgh Posts: 392	Re: How about some pics of bagged 60-66 That truck is sick. I finally got my rides both at the same place for once. Snapped a couple of shots... DSC_3241(2) by Malibob, on Flickr DSC_3251(2) by Malibob, on Flickr Not great shots but too much other stuff to get done. __________________ This statement was made possible by a grant from this station and continued support from viewers like you. Flickr

06-19-2012, 07:58 AM	#10
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: How about some pics of bagged 60-66 always loved ur truck Malibob!!! now i love ur car too __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918

06-19-2012, 08:50 AM	#11
Malibob Registered User Join Date: May 2009 Location: Pittsburgh Posts: 392	Re: How about some pics of bagged 60-66 Thanks guys, trying to get a new bed put in it here by the end of the week- my job has other plans for me though. There has been a lot of bad a$$ trucks posted on here recently, lets keep em coming. __________________ This statement was made possible by a grant from this station and continued support from viewers like you. Flickr

06-21-2012, 01:39 PM	#15
scot 6 feet eleven Registered User Join Date: Sep 2008 Location: southdakota Posts: 179	Re: How about some pics of bagged 60-66 its hard to get it really low with 24's Attached Images __________________ 1960 chevy 4.6 police interceptor chassis under this bad boy with 24 inch lexani's

06-21-2012, 06:20 PM	#16
Narxoleptic Customs Registered User Join Date: Dec 2011 Location: Blytheville/Bentonville, AR Posts: 393	Re: How about some pics of bagged 60-66 That looks awesome!!! Posted via Mobile Device

06-21-2012, 08:47 PM	#17
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,528	Re: How about some pics of bagged 60-66 Yes, Skillfully done. Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

06-22-2012, 10:30 PM	#18
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,528	Re: How about some pics of bagged 60-66 Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

07-04-2012, 09:28 AM	#19
3rd Coast Z Registered User Join Date: Feb 2012 Location: Friendswood, TX Posts: 45	Re: How about some pics of bagged 60-66 Here are a couple more pics. Finally got the dash put together and have actually driven her around a little bit.

07-10-2012, 09:14 AM	#22
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: How about some pics of bagged 60-66 http://www.sporttruck.com/featuredve...uck/index.html __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

07-04-2012, 09:29 AM	#23
3rd Coast Z Registered User Join Date: Feb 2012 Location: Friendswood, TX Posts: 45	Re: How about some pics of bagged 60-66 Dont laugh but here is my modernly classic instrument panel.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.