60-66 crew cabs or extended cabs

[1963c-10]

Id be alll over that if it wasnt such a long drive from North Carolina. Id be looking at 49hours and 3100 miles.

[padresag]

Originally Posted by 1963c-10

Id be alll over that if it wasnt such a long drive from North Carolina. Id be looking at 49hours and 3100 miles.

just think of the country that you would see and all of the trucks and people along the way. it would be like an adventure and then you could write a book about it. that would cover all your expensives
rron

[1963c-10]

Done the drive a few times. I did pro rodeo for 6 years (bullriding/bronc riding).. Even made it to Calgary once. Getting there is easier than the return trip cost wise. If somebody was coming this way though...Ill keep it in mind. I use to drive from Virginia to Montana in 32hr straight through. Was a rough trip...several times

[awbrown]

Ya know , that is one thing we need on this website is a hauling schedule or transport page .. I have seen them on other websites ,it would be to our advantage to start one , that way if someone finds a truck in another state , and needs it transported and someoene happens to be coming this way with a trailer it just makes sense to haul a load on the way out ... here is a link to one on a tractor site http://www.ytmag.com/cgi-bin/haulquery.pl
maybe an administrator will see this ....I have one to be picked up in NC right now....

[derail]

I asked about one with "the big cheese" about 6 months ago and was told that there used to be one and it didn't get used very much. Now, I think people use the "general" section to post this type of thing. I thought the same thing after seeing something similar on ih8mud.

[BadBoy59]

just saw the pics from the cc's that jonscustom posted...do you have any contact info on these or prices....i am interested, especially the stepside.

[Dub_X]

Originally Posted by BadBoy59

just saw the pics from the cc's that jonscustom posted...do you have any contact info on these or prices....i am interested, especially the stepside.

He only has the stepside and the stretched burb for sale, but go through Sacramento, CA craigslist ads. They're in there.

[derail]

http://sacramento.craigslist.org/cto/3502122275.html

[BadBoy59]

is the red cc still avaiable and where is it located...what is the condition of the cab...really interested. thanks

[padresag]

Originally Posted by BadBoy59

is the red cc still avaiable and where is it located...what is the condition of the cab...really interested. thanks

it is about 70 mi north of Seattle,wa
ron

[boomy3555]

Not my Truck, Just saw it on a current Craigslist Sacramento Add. The ultimate crew cab. a vintage GMC Yosemite Tour Bus

[padresag]

Originally Posted by boomy3555

Not my Truck, Just saw it on a current Craigslist Sacramento Add. The ultimate crew cab. a vintage GMC Yosemite Tour Bus

see that they changed the wheels between pictures. there appears to be other 60-66 around that site
this has been for a sale for awhile
ron

[jonzcustomshop]

Originally Posted by padresag

see that they changed the wheels between pictures. there appears to be other 60-66 around that site
this has been for a sale for awhile
ron

if you look in the corner of the pic there is a 4x4 c/c, I believe this is it, and the same guy is selling this 61 as well, all for high $$$$

[BadBoy59]

i sure wish i was closer to the red cc and this tour bus...a guy could make several crew cabs with that one. how much is the cost on the tour bus.

[boomy3555]

It's listed at $7,500.00 but it's been reposted several times and needs the Three in the tree connected/looked at so can't hurt to make an offer. Although my Druthers would be to restore her as is. There must be alot of history there

[LOW DOUGH]

Yep.... That blue crewcab is in the corner of that pic.
Posted via Mobile Device

[padresag]

w/shields must be a major undertaking for these vehicles as there are quite a few chopprd ones but very little with w/shields in them
ron

[jonzcustomshop]

Originally Posted by padresag

looks like another 1/2 ass conversion job to a later 4 x 4 chassis seeing as the wheels don't centre and the box and cab don't line up
ron

yep, also the s/fleet wheelwells do not work with 35+ tires

Originally Posted by padresag

w/shields must be a major undertaking for these vehicles as there are quite a few chopprd ones but very little with w/shields in them
ron

yep I have one of those too, I can either go to billings or portland to get one made which is almost the same distance to trailer at $3+ a gallon, plus the cost of multiple winshields,and the cost of the labor.... quite an expensive undertaking.

[Captainfab]

There is supposed to be a local guy here that can cut windshields.

Originally Posted by jonzcustomshop

yep I have one of those too, I can either go to billings or portland to get one made which is almost the same distance to trailer at $3+ a gallon, plus the cost of multiple winshields,and the cost of the labor.... quite an expensive undertaking.

[1Bad62Pro/Street]

Bump...... Cuz it's been a while.

[el_borracho]

I know I'm bringing back a zombie thread, but is anyone selling a quad cab? I am in the market for a 60-66 truck to make a hot rod hauler. I also have a car that i'd be interested in trading for the right one if you'd rather do that .

this is probably the wrong site for it but it's a chopped '49 ford

[1963c-10]

great looking car. ive took some pics of one the other day in the same body style....have to see if i can find them
Posted via Mobile Device

[64chevycrewcab]

Here is my 64 that I bought earlier this year.

[aerotruk63]

Originally Posted by 64chevycrewcab

Here is my 64 that I bought earlier this year.

Deserving of a few more pictures and history.

[Clyde65]

Tell me some more about your crew, it is different than any I have seen, the rear doors are different. where did you find her...oh and definitely more pics please!