The 60-66 "PAYING IT FORWARD" thread! - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joe dirt · 08-20-2015, 09:08 AM

Quote:

Originally Posted by ol_skool_chevy

I have a 1966 long bed frame roller free if anyone wants it. Hillsboro oregon
Posted via Mobile Device

could possibly use the rear end out of it,..don't have room to store a frame tho...

Improbcat · 08-20-2015, 11:49 AM

I'm thinking of temporarily modifying my truck in a "Mad Max" style for halloween, and want to make some crazy fake engine coming out of the hood. But even though I have a better hood that will eventually go on, I don't want to trash the current one, as it is definitely fixable for someone who needs it. It'll need a front panel, and some holes patched on the side, but most of it is solid.

To that end, I'm willing to swap the current hood straight-up to anyone local for their trashed hood. I just need one solid enough to bold up & latch. Don't care about rust/dents/paint/etc.

Jeepers Creepers · 08-21-2015, 07:34 PM

Anybody need an under-bed spare tire carrier? It came off my '62 non-dually C30.

**jayoldschool** · 08-21-2015, 07:53 PM

Arghhh... I wish I was closer. I have zero spare hardware.

Jeepers Creepers · 08-21-2015, 08:00 PM

Quote:

Originally Posted by jayoldschool

Arghhh... I wish I was closer. I have zero spare hardware.

Road trip! You can show me how to get my steering column apart while you're down here ....

Jeepers Creepers · 08-22-2015, 09:18 PM

How about some wide mirrors? Just need some cleaning up.

1963c-10 · 08-24-2015, 10:26 AM

Quote:

Originally Posted by Jeepers Creepers

Anybody need an under-bed spare tire carrier? It came off my '62 non-dually C30.

I'd be interested in the hardware off of this if its in decent shape. Just gave a buddy whos working on a 65 this mount, but he needs the hardware that goes with it.

Jeepers Creepers · 08-24-2015, 06:57 PM

Quote:

Originally Posted by 1963c-10

I'd be interested in the hardware off of this if its in decent shape. Just gave a buddy whos working on a 65 this mount, but he needs the hardware that goes with it.

Seems alright. I took it off because someone had installed a side tire mount on one step and I'm not a huge fan of the under-bed mounts any way. Thinking about sticking my gas tank under there.

jtrichard · 08-25-2015, 04:14 PM

Quote:

Originally Posted by Jeepers Creepers

Anybody need an under-bed spare tire carrier? It came off my '62 non-dually C30.

Interested in the whole unit (or just the rack if hardware is gone) would you ship? let me know how much 92252

Jeepers Creepers · 08-25-2015, 04:17 PM

Quote:

Originally Posted by jtrichard

Interested in the whole unit would you ship? let me know how much 92252

I can see. Probably going to be a fortune to get from here to Cali though. PM your address and I'll get it packaged up, but I won't be able to get down there to get it weighed and everything till Saturday. I'll let you know how much then.

jtrichard · 08-26-2015, 01:09 AM

PM sent

1963c-10 · 08-27-2015, 03:49 PM

How much to ship the hardware to 28306?

Jeepers Creepers · 08-27-2015, 08:27 PM

Quote:

Originally Posted by 1963c-10

How much to ship the hardware to 28306?

Hey guys, the spare tire carrier is spoken for already, sorry.

**slepysal** · 08-31-2015, 08:33 PM

I have a 60-63 windshield far from show but decent daily driver condition . no cracks. You can use it until you can save up for a new one.
No shipping I am in San Jose .

jteck10 · 09-01-2015, 10:34 AM

Quote:

Originally Posted by slepysal

I have a 60-63 windshield far from show but decent daily driver condition . no cracks. You can use it until you can save up for a new one.
No shipping I am in San Jose .

im in the bay area as well. how much for the windshield?

**slepysal** · 09-01-2015, 10:42 AM

Quote:

Originally Posted by jteck10

im in the bay area as well. how much for the windshield?

Since this is the pay it forward thread.......FREE!!
I'm in San Jose let me know. Let me know

jteck10 · 09-01-2015, 11:16 AM

Quote:

Originally Posted by slepysal

Since this is the pay it forward thread.......FREE!!
I'm in San Jose let me know. Let me know

that great! ill pm you, thanks!

vince1 · 09-02-2015, 08:47 AM

I have some stuff in Calgary I'd like to get rid of. Heater vents, those corner body panels between the hood and doors, left over wiring harness, gas tank and a lot of other stuff I'd have to check to remember.

**wcstory** · 09-05-2015, 08:50 PM

Taken by Rolland
I posted a free manual steering box with low mileage in the 60-66 parts forum.

Just pickup or pay shipping

Fantastic thread! Props to the OP

Isaiah92260 · 09-05-2015, 08:56 PM

Quote:

Originally Posted by vince1

I have some stuff in Calgary I'd like to get rid of. Heater vents, those corner body panels between the hood and doors, left over wiring harness, gas tank and a lot of other stuff I'd have to check to remember.

You said you have a left over wiring harness? For what year? I have a 63' with gauges and I'm trying to peice back together my engine harness because a lot of it has been clipped and taped off

57chevy406 · 09-08-2015, 05:50 PM

Free 1961 gas tank with sending unit. Took out of my truck when I moved tank to rear under bed. No leaks sender works good has minor surface rust as it has been setting outside. Must pickup cannot ship.

vince1 · 09-08-2015, 06:07 PM

These bits of harness weren't worth posting. I've wrapped them up and put them in a box.

oem4me · 09-08-2015, 06:41 PM

Quote:

Originally Posted by 57chevy406

Free 1961 gas tank with sending unit. Took out of my truck when I moved tank to rear under bed. No leaks sender works good has minor surface rust as it has been setting outside. Must pickup cannot ship.

If no takers on the complete tank, I'd be interested in the working sender.
Thanks BP

**PGSigns** · 09-08-2015, 08:01 PM

I have a 250 6 cylinder engine and 3 speed trans in a 66 I am going to scrap. Engine appears to be in good shape and according to the previous owner ran till he got working on it. Free to anyone who wants to come and get it. Located in south east Virginia.
Jimmy

Isaiah92260 · 09-08-2015, 11:21 PM

Quote:

Originally Posted by vince1

These bits of harness weren't worth posting. I've wrapped them up and put them in a box.

Has anyone contacted you about the wire harness yet? Would it possible for you to send it to me in Palm Desert California?

08-20-2015, 11:49 AM	#127
Improbcat Registered User Join Date: Jul 2012 Location: E Providence RI Posts: 238	Re: The 60-66 "PAYING IT FORWARD" thread! I'm thinking of temporarily modifying my truck in a "Mad Max" style for halloween, and want to make some crazy fake engine coming out of the hood. But even though I have a better hood that will eventually go on, I don't want to trash the current one, as it is definitely fixable for someone who needs it. It'll need a front panel, and some holes patched on the side, but most of it is solid. To that end, I'm willing to swap the current hood straight-up to anyone local for their trashed hood. I just need one solid enough to bold up & latch. Don't care about rust/dents/paint/etc. __________________ 1964 C/10 Longbed Fleetside, base model. (build thread) (pictures) SOLD 1964 C/10 Shortbed Fleetside, Deluxe. (pictures) SOLD

08-21-2015, 07:34 PM	#128
Jeepers Creepers Registered User Join Date: Aug 2015 Location: Lawrenceville, GA Posts: 75	Re: The 60-66 "PAYING IT FORWARD" thread! Anybody need an under-bed spare tire carrier? It came off my '62 non-dually C30. Attached Images

08-21-2015, 07:53 PM	#129
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,169	Re: The 60-66 "PAYING IT FORWARD" thread! Arghhh... I wish I was closer. I have zero spare hardware.

08-22-2015, 09:18 PM	#131
Jeepers Creepers Registered User Join Date: Aug 2015 Location: Lawrenceville, GA Posts: 75	Re: The 60-66 "PAYING IT FORWARD" thread! How about some wide mirrors? Just need some cleaning up. Attached Images

08-26-2015, 01:09 AM	#136
jtrichard Registered User Join Date: Jun 2013 Location: joshua tree ca. Posts: 1,484	Re: The 60-66 "PAYING IT FORWARD" thread! PM sent

08-27-2015, 03:49 PM	#137
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: The 60-66 "PAYING IT FORWARD" thread! How much to ship the hardware to 28306? __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-31-2015, 08:33 PM	#139
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: The 60-66 "PAYING IT FORWARD" thread! I have a 60-63 windshield far from show but decent daily driver condition . no cracks. You can use it until you can save up for a new one. No shipping I am in San Jose . __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

09-02-2015, 08:47 AM	#143
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,169	Re: The 60-66 "PAYING IT FORWARD" thread! I have some stuff in Calgary I'd like to get rid of. Heater vents, those corner body panels between the hood and doors, left over wiring harness, gas tank and a lot of other stuff I'd have to check to remember.

09-05-2015, 08:50 PM	#144
wcstory Registered User Join Date: Jun 2006 Location: Cape Cod, Ma. Posts: 236	Re: The 60-66 "PAYING IT FORWARD" thread! Taken by Rolland I posted a free manual steering box with low mileage in the 60-66 parts forum. Just pickup or pay shipping Fantastic thread! Props to the OP Last edited by wcstory; 09-06-2015 at 05:27 PM.

09-08-2015, 05:50 PM	#146
57chevy406 Registered User Join Date: Jan 2009 Location: Edgewater FL Posts: 19	Re: The 60-66 "PAYING IT FORWARD" thread! Free 1961 gas tank with sending unit. Took out of my truck when I moved tank to rear under bed. No leaks sender works good has minor surface rust as it has been setting outside. Must pickup cannot ship.

09-08-2015, 06:07 PM	#147
vince1 Registered User Join Date: Jan 2013 Location: Calgary Alberta Posts: 1,169	Re: The 60-66 "PAYING IT FORWARD" thread! These bits of harness weren't worth posting. I've wrapped them up and put them in a box. Attached Images

09-08-2015, 08:01 PM	#149
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: The 60-66 "PAYING IT FORWARD" thread! I have a 250 6 cylinder engine and 3 speed trans in a 66 I am going to scrap. Engine appears to be in good shape and according to the previous owner ran till he got working on it. Free to anyone who wants to come and get it. Located in south east Virginia. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.