![]() |
![]() |
#126 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
Got the hinges worked on yesterday...they were all sloppy..a few hours and a few minutes of frustration finding the parts..I came up with these from Dorman part #38374, its a kit assortment and has 2 of the ones for the 62 ..so I bought as many as I could they only had 2 at one parts house and one at another...then found them at Pep Boys availible seperate but for the same price as the assortment, at 6$ per set its not bad and LMC wanted 9.99 plus their shipping would have been more
I cleaned them up and re used the pin and put a good coat of anti sieze on the pins when I installed them, all hinges like new for under 30$ |
![]() |
![]() |
![]() |
#127 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
Got some primer surfacer shot today and all the seams sealed
|
![]() |
![]() |
![]() |
#128 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
big difference in this and what I started with
|
![]() |
![]() |
![]() |
#129 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
more
|
![]() |
![]() |
![]() |
#130 |
Registered User
Join Date: Jan 2009
Location: bean station tennessee
Posts: 398
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
looking good.i know what you have went through doing this cab sheet metal work i restored a 66 truck back in 1994 and most of the repair panels were not available then and had to be made from scratch including the inner rocker panels.looks like you have done a fine job.
|
![]() |
![]() |
![]() |
#131 | |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
Quote:
|
|
![]() |
![]() |
![]() |
#132 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
Got one more door painted inside and the rebushed hinges painted
|
![]() |
![]() |
![]() |
#133 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
more
|
![]() |
![]() |
![]() |
#134 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
got the summit headers test fitted...they look ok...kinda cheap and thin flanges, but for 200$ what do u expect ?
|
![]() |
![]() |
![]() |
#135 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
Good to see you back
![]() Do you have a part number for those headers? How far down do they hang underneath?
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#136 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
Subscribed, went through the first couple pages, very nice workmanship
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#137 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
Made a new trans x member today and started on the exhaust system
Last edited by Bugeyev8; 06-15-2012 at 12:11 AM. |
![]() |
![]() |
![]() |
#138 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
|
![]() |
![]() |
![]() |
#139 | |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
Quote:
The headers are summit long tubes for a 67 camaro , they were 239 $ as I recall, they dont hang too low and for a stock truck like mine plenty of clearance, I can get the part # if you want in a few |
|
![]() |
![]() |
![]() |
#140 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
pics
|
![]() |
![]() |
![]() |
#141 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
pics 2
|
![]() |
![]() |
![]() |
#142 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
finished my exhaust tonight, sounds awesome !!
|
![]() |
![]() |
![]() |
#143 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
tail pipes, 2.50 mandrel bent pipe
|
![]() |
![]() |
![]() |
#144 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
|
![]() |
![]() |
![]() |
#145 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
got my belt set up at the pick n pull.....bastards charge an arm and leg for this stuff now!
I am adding AC and needed to relocate the alt to the other side, got a 90s camaro belt set up |
![]() |
![]() |
![]() |
#146 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
Been a while but still working on the 62, been going slow but..the vintage air ac is in and the upper intake is powder costed as well as all accy brackets and pulleys, I get a deal thru work so its better than me cleaning and using a rattle can, cleaning up the engine bay as I go till I blow the body apart and the front clip comes off for paint
|
![]() |
![]() |
![]() |
#147 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
pics won't load for some reason
Last edited by Bugeyev8; 09-22-2012 at 09:13 PM. |
![]() |
![]() |
![]() |
#148 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
before, I swapped this engine in when I was 17...I just wanted it to run at that time...engine was hi tech then ! I still like the look of the TPI !
|
![]() |
![]() |
![]() |
#149 |
Registered User
Join Date: Apr 2011
Location: .
Posts: 3,104
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
Nice work. subscribed.
|
![]() |
![]() |
![]() |
#150 |
Senior Member
![]() Join Date: Aug 2009
Location: San Leandro, Ca 94577
Posts: 854
|
Re: My 1962 C10 Build Thread "Grandpa's Truck "
not much progress...just doing the easy stuff and thats spending money !
bolts and door parts back from plater today ! |
![]() |
![]() |
![]() |
Bookmarks |
Tags |
1962, lsa supercharger, rust repair, tuned port |
|
|