OR 1972 C10 Parting

[uaengineer]

Originally Posted by DLTruck1973

The other panels are on another truck and need to be pulled, cleaned and inspected before I can price them. I can get you a quote for everything at once or do the panels separate. The panels are going to take some time to pull and get cleaned.

Thank you,
Thomas

Is there any chance the panels have been pulled yet?

[DLTruck1973]

Originally Posted by justinl6050

Still have the transmission hump?

This one sold. Are you looking for a 2wd 4 speed hump? I should have another one in equal or better condition. Let me know what you need and I will check the inventory for you.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by uaengineer

Is there any chance the panels have been pulled yet?

No yet but I can make it happen this coming week if you need them. I cannot say what condition they are in until I pull and clean.

Stay tuned...

Thank you,
Thomas

[justinl6050]

Pm Sent. Just need any high hump

Originally Posted by DLTruck1973

This one sold. Are you looking for a 2wd 4 speed hump? I should have another one in equal or better condition. Let me know what you need and I will check the inventory for you.

Thank you,
Thomas

[46stude]

Originally Posted by DLTruck1973

I pack the trim very well to prevent damage in shipping.

Yes, yes you did!

My drivers side upper door trim & parking light lenses arrived today, exactly as described. Thank you.

[70chevytruck]

Water pump pulley.....have one? Double groove....shortly.

[DLTruck1973]

Originally Posted by 70chevytruck

Water pump pulley.....have one? Double groove....shortly.

Yes I do have one. This is 5 13/16 dia. The part number is 3995646AH

$25.00 plus shipping. I also have the larger dia version of this pulley which is 7 1/8 inch.

Let me know.

Thank you,
Thomas

[70chevytruck]

Hat looks too deep. Let me measure mine tonight.

[DLTruck1973]

Originally Posted by 70chevytruck

Hat looks too deep. Let me measure mine tonight.

This one is 2 3/4 from inside to outside, laying flat on the table like in the photo.

Let me know,

Thank you,
Thomas

[70chevytruck]

Ill take it. Sending u private message.

[DLTruck1973]

Originally Posted by uaengineer

Is there any chance the panels have been pulled yet?

Ok, here is what I have for door panels. The are $50.00 plus shipping. They are extremely chalky, just to make that clear. I do not want to wash them in fear that it will take the grain off. These do not come with the inserts.

Let me know and give me a zip code for shipping if interested.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by 70chevytruck

Ill take it. Sending u private message.

No PM as of yet.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by justinl6050

Still have the transmission hump?

Here are photos of the hump.

I can sell it to you for $35.00 and it will be $40.00 to ship, so $75.00 total. Shipping is higher because of the distance.

Let me know and I will get you payment information.

Thank you,
Thomas

[DarkFlounder]

Still have the door mirrors? How much shipped to 94015?

[DLTruck1973]

Originally Posted by DarkFlounder

Still have the door mirrors? How much shipped to 94015?

If you are referring to the tripod mounts in the last photo for $40.00, yes we still have them. I can get you a shipping quote soon.

Thank you,
Thomas

[DarkFlounder]

Originally Posted by DLTruck1973

If you are referring to the tripod mounts in the last photo for $40.00, yes we still have them. I can get you a shipping quote soon.

Yes, those. They look to be the DG4 below-eyeline mirrors. The tripod mounts look correct, and the holes on the driver door pic you posted earlier looks correct.

How clean are the tripods?

Thanks,
William

[70RedBlurr]

Clutch pedal linkage parts. Still have the parts listed from photo 1?
Steve

[70chevytruck]

Did you get my message and info?

[DLTruck1973]

Originally Posted by 70RedBlurr

Clutch pedal linkage parts. Still have the parts listed from photo 1?
Steve

Sorry sold from this truck but I should be able to put another set together for you from another truck if interested. It will be the same price.

I would also need your zip code to do as ship quote.

Thank you for the interest,
Thomas

[uaengineer]

Originally Posted by DLTruck1973

Ok, here isis the trimwhat I have for door panels. The are $50.00 plus shipping. They are extremely chalky, just to make that clear. I do not want to wash them in fear that it will take the grain off. These do not come with the inserts.

Let me know and give me a zip code for shipping if interested.

Thank you,
Thomas

Zip code is 35405 for shipping quote. Is the trim ring included? If not how much to include? I am planning on using these without an insert. Can you post a pic of them without the insert?

Thanks

[70RedBlurr]

Originally Posted by DLTruck1973

Sorry sold from this truck but I should be able to put another set together for you from another truck if interested. It will be the same price.

I would also need your zip code to do as ship quote.

Thank you for the interest,
Thomas

Heck assemble me a kit and I am in! Ships to 95023.
That going to include retaining springs for rods, zbar, pivot balls, pedal rods, springs, and frame bracket for small block chevy?

Thanks
Steve

[DLTruck1973]

Originally Posted by DarkFlounder

Yes, those. They look to be the DG4 below-eyeline mirrors. The tripod mounts look correct, and the holes on the driver door pic you posted earlier looks correct.

How clean are the tripods?

Thanks,
William

Hi William,

$40.00 for the mirrors plus $17.00 shipping to your zip code (94015)

In my opinion, the stainless tri pod portions of the mirrors are in excellent condition and would look fantastic with some Mothers polish.

As mentioned the mirror arms and mirror heads are aftermarket but the tri pods are the real deal.

Let me know and thank you,
Thomas

[DarkFlounder]

Originally Posted by DLTruck1973

Hi William,

$40.00 for the mirrors plus $17.00 shipping to your zip code (94015)

In my opinion, the stainless tri pod portions of the mirrors are in excellent condition and would look fantastic with some Mothers polish.

As mentioned the mirror arms and mirror heads are aftermarket but the tri pods are the real deal.

Let me know and thank you,
Thomas

Sounds great. PM me payment information.

Thanks,
William

[DLTruck1973]

Originally Posted by 70RedBlurr

Heck assemble me a kit and I am in! Ships to 95023.
That going to include retaining springs for rods, zbar, pivot balls, pedal rods, springs, and frame bracket for small block chevy?

Thanks
Steve

For everything listed in the thread for a 72 C10 is $65.00 plus shipping. Do you have a 72 or what year is your truck? Yes it will include everything from the clutch pedal down to the throw out fork. I will also need your zip code for a shipping quote.

Thank you,
Thomas

[70RedBlurr]

Originally Posted by DLTruck1973

For everything listed in the thread for a 72 C10 is $65.00 plus shipping. Do you have a 72 or what year is your truck? Yes it will include everything from the clutch pedal down to the throw out fork. I will also need your zip code for a shipping quote.

Thank you,
Thomas

Thomas zip code for shipping is 95023...
the truck I need those parts for is a 70.

Thanks
Steve