83/84 swb stepside long time build - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rip2174 · 07-28-2014, 08:11 PM

Now I need to clean up my garage. So things will be on pause for probably a week or two. By then hopefully the other truck with motor shows up so I can start putting together a truck. LOL

rip2174 · 07-28-2014, 08:13 PM

Quote:

Originally Posted by jpnh

getting closer. looks good-jeff

Thank you

rip2174 · 08-05-2014, 08:35 PM

Ran into some issues with the front shocks this past week. Got with Nate and he is going to try and help fix the problem. I really like Porterbuilt's customer service. Meanwhile I've started on installing the Accuair e-level system today. This will probably take me a little while. when I get a few things done I'll post a couple of pics. Really like the quality of the product that Accuair puts out. The system was nicely packaged with some pretty excellent diagrams.

rip2174 · 08-07-2014, 07:20 PM

Here is the rear sensors mounted. Need to tweak the linkage a little to get it more centered. Didn't get the full 2.75 recommended. But it is over 2.5. About the best place I could find to mount the sensors. Having a little difficult time finding a spot for the front ones.
Name: IMAG0242[1].jpg
Views: 680
Size: 32.3 KB

Name: IMAG0242[1].jpg
Views: 680
Size: 32.3 KB

Name: IMAG0243[1].jpg
Views: 717
Size: 28.2 KB

rip2174 · 08-12-2014, 04:44 PM

Ok getting the front end back together. Can't afford to upgrade brakes right now. Went with the CPP drop spindles. Had to buy the HD 1.25 rotors to go on spindles. Was told I could use stock calipers , just needed to order a bracket from CPP to attach stock calipers to spindles. Attached bracket and calipers with new pads wont fit over the rotor. Gap between pads fully retracted piston is 1.125. Do I need different calipers? Any feed back would be nice.

rip2174 · 08-14-2014, 07:22 PM

got the HD calipers and everything lined up and went together well. Heres a couple pics . Also got the front height sensors mounted.
Name: IMAG0245[1].jpg
Views: 648
Size: 33.1 KB

Name: IMAG0245[1].jpg
Views: 648
Size: 33.1 KB

Name: IMAG0246[1].jpg
Views: 623
Size: 40.9 KB

**aotte1** · 08-14-2014, 10:33 PM

It is looking very nice, you really come a long way, with a great build.

Les

PM sent on 220

rip2174 · 08-28-2014, 06:55 PM

Quote:

Originally Posted by aotte1

It is looking very nice, you really come a long way, with a great build.

Les

PM sent on 220

Thank you Sir. And thank you for the welder advice.

rip2174 · 08-28-2014, 07:06 PM

Well I got most of the front stuff installed. The Accuair sensors. The rack and pinion.

Name: IMAG0260.jpg
Views: 652
Size: 36.6 KB

rip2174 · 08-28-2014, 07:10 PM

got to the sway bar and thought I'd get a few questions answered. the brackets line up with a hole in the frame in the front hole. Should I use these and drill the rear holes? the holes are a 1/4 in difference off the front of the frame.

Name: IMAG0258.jpg
Views: 603
Size: 42.5 KB

Name: IMAG0258.jpg
Views: 603
Size: 42.5 KB

Name: IMAG0257.jpg
Views: 598
Size: 39.6 KB

rip2174 · 08-28-2014, 07:13 PM

got this with the sway bar kit. Got to say the instructions are pretty vague. Should this bracket be under frame between the frame and the U bracket holding the bushing?

Name: IMAG0263.jpg
Views: 601
Size: 60.4 KB

Name: IMAG0263.jpg
Views: 601
Size: 60.4 KB

rip2174 · 08-28-2014, 07:18 PM

Nate from Porterbuilt got back to me today about the angle of the front shocks. He said he'd be unable to make new brackets and that I'd have to move the shock brackets forward. So know I have to take those off, cut most of the old shock mount out and move the brackets up. Wouldn't be so bad except I just painted. LOL Still impressed with Porterbuilt's product and their customer service.

rip2174 · 09-19-2014, 07:06 AM

Well. Its been a few weeks and Ive been dragging my feet. had to remove front shock mounts and move them forward about an 1 1/4 in. Had to cut out the stock bump where the shocks use to bolt to.
Name: IMAG0267.jpg
Views: 583
Size: 88.8 KB

Name: IMAG0267.jpg
Views: 583
Size: 88.8 KB

rip2174 · 09-19-2014, 07:08 AM

got mount mounted back up and shock close to the 3/8 that Nate suggested from the upper control arm bolt.
Name: IMAG0270.jpg
Views: 569
Size: 78.8 KB

Name: IMAG0271.jpg
Views: 569
Size: 98.0 KB

rip2174 · 09-19-2014, 07:14 AM

put 2 washers in lower shock bolt and now the shock bushings are in better shape.
[ATTACH][ATTACH] Name: IMAG0274.jpg
Views: 565
Size: 25.4 KB

[/ATTACH][/ATTACH]

rip2174 · 09-19-2014, 07:16 AM

Wanted a little up grade in brake lines. Got some braided brake lines from Azproperformance.

Name: IMAG0281.jpg
Views: 567
Size: 93.1 KB

rip2174 · 09-19-2014, 07:21 AM

For now im just painting old wheels.
With or w/o?
[ATTACH] Name: IMAG0269.jpg
Views: 560
Size: 90.5 KB

[/ATTACH]

Hankster · 09-20-2014, 03:02 PM

I was planning on painting mine black and running chrome center cap and no ring, but now I'm going white.. So If i was you, I'd run center caps, and no rings.

rip2174 · 09-27-2014, 05:38 PM

Quote:

Originally Posted by Hankster

I was planning on painting mine black and running chrome center cap and no ring, but now I'm going white.. So If i was you, I'd run center caps, and no rings.

definitely center caps.

rip2174 · 09-27-2014, 05:41 PM

Ok went out today to finish mounting the sway bar. Got it all in place and aired the frame out and noticed that the passenger's side is slightly higher than the driver's. Checked to make sure all air was out and stood on frame to get it to drop, but seemed to be bottomed out. the sway bar seems to be off. so I took a few measurements and it is out like 1/2 inch. posting some pictures. can any give any advice why the frame isn't laying level side to side?

rip2174 · 09-27-2014, 05:43 PM

Name: IMAG0292.jpg
Views: 509
Size: 34.1 KB

[attach]

Name: IMAG0295.jpg
Views: 507
Size: 35.8 KB

[/attach]

rip2174 · 09-27-2014, 05:44 PM

[attach]

Name: IMAG0297.jpg
Views: 505
Size: 46.5 KB

[/attach]

rip2174 · 09-27-2014, 05:45 PM

Name: IMAG0298.jpg
Views: 509
Size: 40.6 KB

Name: IMAG0299.jpg
Views: 500
Size: 33.3 KB

rip2174 · 06-17-2015, 10:09 PM

Well its been a bit. Was pretty depressed when I felt I hit a wall with frame and the old truck. Guy finally told me other old truck was almost ready. I had to take some time off with that and school and work meeting high demands

rip2174 · 06-17-2015, 10:12 PM

Got the other truck back. Highly disappointed with what I felt was a good project truck coming back and the money I spent for the new vortec. The truck is in real bad shape. He must have stored it under a tree for the last 13 years. All kinds of rust! that wasnt there before, lots past what I feel my body skills are.

07-28-2014, 08:11 PM	#126
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build Now I need to clean up my garage. So things will be on pause for probably a week or two. By then hopefully the other truck with motor shows up so I can start putting together a truck. LOL

08-05-2014, 08:35 PM	#128
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build Ran into some issues with the front shocks this past week. Got with Nate and he is going to try and help fix the problem. I really like Porterbuilt's customer service. Meanwhile I've started on installing the Accuair e-level system today. This will probably take me a little while. when I get a few things done I'll post a couple of pics. Really like the quality of the product that Accuair puts out. The system was nicely packaged with some pretty excellent diagrams.

08-07-2014, 07:20 PM	#129
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build Here is the rear sensors mounted. Need to tweak the linkage a little to get it more centered. Didn't get the full 2.75 recommended. But it is over 2.5. About the best place I could find to mount the sensors. Having a little difficult time finding a spot for the front ones.

08-12-2014, 04:44 PM	#130
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build Ok getting the front end back together. Can't afford to upgrade brakes right now. Went with the CPP drop spindles. Had to buy the HD 1.25 rotors to go on spindles. Was told I could use stock calipers , just needed to order a bracket from CPP to attach stock calipers to spindles. Attached bracket and calipers with new pads wont fit over the rotor. Gap between pads fully retracted piston is 1.125. Do I need different calipers? Any feed back would be nice.

08-14-2014, 07:22 PM	#131
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build got the HD calipers and everything lined up and went together well. Heres a couple pics . Also got the front height sensors mounted.

08-14-2014, 10:33 PM	#132
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,649	Re: 83/84 swb stepside long time build It is looking very nice, you really come a long way, with a great build. Les PM sent on 220

08-28-2014, 07:06 PM	#134
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build Well I got most of the front stuff installed. The Accuair sensors. The rack and pinion. Attached Images

08-28-2014, 07:10 PM	#135
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build got to the sway bar and thought I'd get a few questions answered. the brackets line up with a hole in the frame in the front hole. Should I use these and drill the rear holes? the holes are a 1/4 in difference off the front of the frame.

08-28-2014, 07:13 PM	#136
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build got this with the sway bar kit. Got to say the instructions are pretty vague. Should this bracket be under frame between the frame and the U bracket holding the bushing?

08-28-2014, 07:18 PM	#137
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build Nate from Porterbuilt got back to me today about the angle of the front shocks. He said he'd be unable to make new brackets and that I'd have to move the shock brackets forward. So know I have to take those off, cut most of the old shock mount out and move the brackets up. Wouldn't be so bad except I just painted. LOL Still impressed with Porterbuilt's product and their customer service.

09-19-2014, 07:06 AM	#138
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build Well. Its been a few weeks and Ive been dragging my feet. had to remove front shock mounts and move them forward about an 1 1/4 in. Had to cut out the stock bump where the shocks use to bolt to.

09-19-2014, 07:08 AM	#139
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build got mount mounted back up and shock close to the 3/8 that Nate suggested from the upper control arm bolt.

09-19-2014, 07:14 AM	#140
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build put 2 washers in lower shock bolt and now the shock bushings are in better shape. [ATTACH][ATTACH][/ATTACH][/ATTACH] Attached Images

09-19-2014, 07:16 AM	#141
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build Wanted a little up grade in brake lines. Got some braided brake lines from Azproperformance.

09-19-2014, 07:21 AM	#142
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build For now im just painting old wheels. With or w/o? [ATTACH][/ATTACH] Attached Images



Register or Log In To remove these advertisements.

09-20-2014, 03:02 PM	#143
Hankster Registered User Join Date: Jan 2013 Location: Nacogdoches, Texas Posts: 895	Re: 83/84 swb stepside long time build I was planning on painting mine black and running chrome center cap and no ring, but now I'm going white.. So If i was you, I'd run center caps, and no rings. __________________ Current Build 89 s10 ecsb 2wd 4.3/700r4 50k OG Miles Instagram- shaggin_s10 '86 Chevrolet C10 Custom Deluxe - Gen V 454 - 4l80e - welded 12 bolt (Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611611 ) SOLD

09-27-2014, 05:41 PM	#145
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build Ok went out today to finish mounting the sway bar. Got it all in place and aired the frame out and noticed that the passenger's side is slightly higher than the driver's. Checked to make sure all air was out and stood on frame to get it to drop, but seemed to be bottomed out. the sway bar seems to be off. so I took a few measurements and it is out like 1/2 inch. posting some pictures. can any give any advice why the frame isn't laying level side to side?

09-27-2014, 05:43 PM	#146
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build [attach] [/attach] Attached Images

09-27-2014, 05:44 PM	#147
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build [attach] [/attach] Attached Images

09-27-2014, 05:45 PM	#148
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build

06-17-2015, 10:09 PM	#149
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build Well its been a bit. Was pretty depressed when I felt I hit a wall with frame and the old truck. Guy finally told me other old truck was almost ready. I had to take some time off with that and school and work meeting high demands

06-17-2015, 10:12 PM	#150
rip2174 Registered User Join Date: Apr 2013 Location: wilmington nc Posts: 492	Re: 83/84 swb stepside long time build Got the other truck back. Highly disappointed with what I felt was a good project truck coming back and the money I spent for the new vortec. The truck is in real bad shape. He must have stored it under a tree for the last 13 years. All kinds of rust! that wasnt there before, lots past what I feel my body skills are.

Register or Log In To remove these advertisements.