The GSFMech Build - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**GSFMECH** · 01-16-2009, 08:00 PM

It's an old Edelbrock Torker, they quit making them years ago and I know I could use a better more modern intake. I always thought they were cool and wanted to run it. They make real good low end and mid range power for a single plane manifold.

**GSFMECH** · 01-16-2009, 08:03 PM

Then I got on the master cylinder. I tore everything apart, stripped and repainted and used all new rubber grommets and seals and installed it. Then I bled the brakes

**GSFMECH** · 01-16-2009, 08:05 PM

Then I installed the headliner and got back assembling the dash. I finished up the dash and then got the side glass in. I used all new weather strip, fuzzies etc. and a new set of GM door rubbers I got from Wynne (HuggerCST). This thing is tight.

gringoloco · 01-16-2009, 08:08 PM

Wow! Great attention to detail

**GSFMECH** · 01-16-2009, 08:09 PM

Then I got the insulation and carpet, seats etc. back in, its wild how the color flops out in the sun in that first photo. I'm going to change the carpet after the Pate swap meet, it's stained and worn worse than I remember

**Hart_Rod** · 01-16-2009, 08:11 PM

Looks great!

**GSFMECH** · 01-16-2009, 08:12 PM

Thanks Guys

**GSFMECH** · 01-16-2009, 08:13 PM

I then got back up front and installed the condenser, filter drier etc. I still need to charge the AC. I had bought a o-ring kit from Chevy duty so hopefully there will be no leaks.

**GSFMECH** · 01-16-2009, 08:16 PM

A few shots out in the sun

**GSFMECH** · 01-16-2009, 08:20 PM

Of course I had to take it for a spin. Yee haw, it's been a long time.

When I get back home (I'm at work now) I'll get the trim back on, bumpers hood etc. and we have a little more polishing to do on the paint. I'm getting real excited about getting it back on the road. You never really finish a project like this. I still have a lot of plans for it down the road.

killer71 · 01-16-2009, 08:44 PM

I'm proud for ya...i know ya excited!

**GSFMECH** · 01-16-2009, 09:04 PM

Thanks Kaleb, you bet I am

kyull67 · 01-16-2009, 09:42 PM

beautiful

**LEEVON** · 01-16-2009, 10:20 PM

Looking great! I like the torker intake and the detail in the engine bay. The all medium blue look is nice too.

pcorriveau951 · 01-17-2009, 04:11 PM

how do you like that lizard skin sound deadener now that you have driven the truck?

**Palf70Step** · 01-17-2009, 06:17 PM

Very Nice!!

Can't wait for Cruising the Coast so I can see and hear it!!!!

**GSFMECH** · 01-17-2009, 08:38 PM

Well I'm not sure about the lizard skin yet, I don't have the door panels in yet and I had the windows down. I should be able to give a good report when I get done and get it out on the road.

Bill I'm ready to go to CTC with it as well. Unless the sky falls I will have it there for sure.

powell72 · 01-18-2009, 09:35 PM

Wow, you didn't waste any time on reassembly, I enjoy seeing your attention to detail. It all looks great. Let me know when you get your new carpet in, I'd be interested in buying your old one to get me by until I get mine done.

**GSFMECH** · 01-19-2009, 06:51 AM

Thanks Chris. I sent you a PM about the carpet.

Hey how much longer before we see your trucks in print? I guess they don't tell you that. I don't want to miss it, I have a hard time keeping up being gone half the time.

powell72 · 01-19-2009, 03:52 PM

Quote:

Originally Posted by GSFMECH

Thanks Chris. I sent you a PM about the carpet.

Hey how much longer before we see your trucks in print? I guess they don't tell you that. I don't want to miss it, I have a hard time keeping up being gone half the time.

He told me six months to a year and a half is the average time frame after the shoot, that was the beginning of June, so some time this year??? I hope soon, I'm not a very patient person anyways and this wait is killing me!

**GSFMECH** · 01-27-2009, 04:52 PM

Well Chris, congrats dude, your wait is over. I'm looking forward to seeing it when I get home, my copy should be waiting on me.

**GSFMECH** · 03-14-2009, 12:44 PM

Time for another update. A lot has went on since I posted and I did not have a chance to take any photos of my own. A buddy of mine captured me riding around one evening and took these. I want to clean it up and get it out in the sun and take some photos when I get a chance. Anyway until then these will have to do. I have it on the road but still have lots I want to do to it and will update as I progress.

**GSFMECH** · 03-14-2009, 12:48 PM

A few more

**GSFMECH** · 03-14-2009, 12:50 PM

Last for now.

Oh yeah, for those that asked the Lizard skin makes a BIG difference. You can't feel any engine heat at all and it's much quieter. I can't wait for warm weather and try the AC.

OARNGESI · 03-14-2009, 12:59 PM

That truck looks great

01-16-2009, 08:00 PM	#126
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build It's an old Edelbrock Torker, they quit making them years ago and I know I could use a better more modern intake. I always thought they were cool and wanted to run it. They make real good low end and mid range power for a single plane manifold. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com Last edited by GSFMECH; 01-16-2009 at 08:22 PM. Reason: spelling

01-16-2009, 08:03 PM	#127
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Then I got on the master cylinder. I tore everything apart, stripped and repainted and used all new rubber grommets and seals and installed it. Then I bled the brakes Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

01-16-2009, 08:05 PM	#128
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Then I installed the headliner and got back assembling the dash. I finished up the dash and then got the side glass in. I used all new weather strip, fuzzies etc. and a new set of GM door rubbers I got from Wynne (HuggerCST). This thing is tight. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

01-16-2009, 08:08 PM	#129
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: The GSFMech Build Wow! Great attention to detail __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-16-2009, 08:09 PM	#130
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Then I got the insulation and carpet, seats etc. back in, its wild how the color flops out in the sun in that first photo. I'm going to change the carpet after the Pate swap meet, it's stained and worn worse than I remember Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com Last edited by GSFMECH; 01-16-2009 at 08:11 PM.

01-16-2009, 08:11 PM	#131
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,865	Re: The GSFMech Build Looks great! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-16-2009, 08:12 PM	#132
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Thanks Guys __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com Last edited by GSFMECH; 01-16-2009 at 08:12 PM.

01-16-2009, 08:13 PM	#133
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build I then got back up front and installed the condenser, filter drier etc. I still need to charge the AC. I had bought a o-ring kit from Chevy duty so hopefully there will be no leaks. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

01-16-2009, 08:16 PM	#134
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build A few shots out in the sun Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

01-16-2009, 08:20 PM	#135
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Of course I had to take it for a spin. Yee haw, it's been a long time. When I get back home (I'm at work now) I'll get the trim back on, bumpers hood etc. and we have a little more polishing to do on the paint. I'm getting real excited about getting it back on the road. You never really finish a project like this. I still have a lot of plans for it down the road. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

01-16-2009, 08:44 PM	#136
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: The GSFMech Build I'm proud for ya...i know ya excited! __________________ R.I.P. Killer 71 10/26/07

01-16-2009, 09:04 PM	#137
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Thanks Kaleb, you bet I am __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

01-16-2009, 09:42 PM	#138
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: The GSFMech Build beautiful __________________ The first '67 The current '67 '63 Biscayne

01-16-2009, 10:20 PM	#139
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,919	Re: The GSFMech Build Looking great! I like the torker intake and the detail in the engine bay. The all medium blue look is nice too. __________________ '86 GMC C30 Crew ~ '86 C20 Crew ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '74K10 ~ '71 Cheyenne swb ~'50 3100 bagged ~ '80 Wife ~ Late model kids

01-17-2009, 04:11 PM	#140
pcorriveau951 Registered User Join Date: Nov 2007 Location: riverside, ca Posts: 147	Re: The GSFMech Build how do you like that lizard skin sound deadener now that you have driven the truck?



Register or Log In To remove these advertisements.

01-17-2009, 06:17 PM	#141
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,468	Re: The GSFMech Build Very Nice!! Can't wait for Cruising the Coast so I can see and hear it!!!! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

01-17-2009, 08:38 PM	#142
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Well I'm not sure about the lizard skin yet, I don't have the door panels in yet and I had the windows down. I should be able to give a good report when I get done and get it out on the road. Bill I'm ready to go to CTC with it as well. Unless the sky falls I will have it there for sure. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com Last edited by GSFMECH; 01-17-2009 at 08:40 PM. Reason: spelling

01-18-2009, 09:35 PM	#143
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: The GSFMech Build Wow, you didn't waste any time on reassembly, I enjoy seeing your attention to detail. It all looks great. Let me know when you get your new carpet in, I'd be interested in buying your old one to get me by until I get mine done. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html Last edited by powell72; 01-18-2009 at 09:36 PM.

01-19-2009, 06:51 AM	#144
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Thanks Chris. I sent you a PM about the carpet. Hey how much longer before we see your trucks in print? I guess they don't tell you that. I don't want to miss it, I have a hard time keeping up being gone half the time. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com Last edited by GSFMECH; 01-19-2009 at 06:52 AM. Reason: spelling

01-27-2009, 04:52 PM	#146
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Well Chris, congrats dude, your wait is over. I'm looking forward to seeing it when I get home, my copy should be waiting on me. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

03-14-2009, 12:44 PM	#147
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Time for another update. A lot has went on since I posted and I did not have a chance to take any photos of my own. A buddy of mine captured me riding around one evening and took these. I want to clean it up and get it out in the sun and take some photos when I get a chance. Anyway until then these will have to do. I have it on the road but still have lots I want to do to it and will update as I progress. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

03-14-2009, 12:48 PM	#148
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build A few more Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

03-14-2009, 12:50 PM	#149
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	Re: The GSFMech Build Last for now. Oh yeah, for those that asked the Lizard skin makes a BIG difference. You can't feel any engine heat at all and it's much quieter. I can't wait for warm weather and try the AC. Attached Images __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com Last edited by GSFMECH; 03-14-2009 at 12:54 PM.

03-14-2009, 12:59 PM	#150
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: The GSFMech Build That truck looks great __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

Register or Log In To remove these advertisements.