Parting 1971 Suburban (NM) - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CMACDONALD1** · 04-25-2009, 11:46 AM

what kind of shape is the upper rear hatch in i've been looking for a decent one for about 5 years.Thanks

**Hart_Rod** · 04-25-2009, 12:22 PM

Quote:

Originally Posted by CMACDONALD1

what kind of shape is the upper rear hatch in i've been looking for a decent one for about 5 years.Thanks

The hatch and tailgate have been sold.

R/

CARZ1968 · 04-26-2009, 12:50 AM

paypal sent

gmbpmidway · 04-27-2009, 01:27 AM

how about the passenger tail light area to quarter to 85050

gmbpmidway · 04-27-2009, 01:34 AM

how about the passenger tail light area to quarter shipped to 85050

**Hart_Rod** · 04-27-2009, 11:19 PM

Quote:

Originally Posted by gmbpmidway

how about the passenger tail light area to quarter shipped to 85050

Here's what's left. Let me know. Are you still looking for a frame? There's a guy that will be pulling an empty trailer to Phoenix.

http://67-72chevytrucks.com/vboard/s...d.php?t=341212

67ChevyRedneck · 04-28-2009, 01:02 AM

You KILLED it!

**Hart_Rod** · 05-05-2009, 04:47 PM

Quote:

Originally Posted by 67ChevyRedneck

You KILLED it!

Jesse, I haven't forgot about you,

. I've got the pieces cut out of the side. I also have some pictures of the fender lips I want you to look at to see if they will work for you. I'll post them later.

If I've missed someone elses question, please repost or send me a PM. This thing will be gone this weekend, so let me know ASAP.

R/

NPilot1975 · 05-05-2009, 09:41 PM

Looks like you have pretty much dissected the whole thing. Just wanted to make sure you didn't forget about the two patches I need.
http://67-72chevytrucks.com/vboard/s...7&postcount=54

Also, did you end up selling the rearend and what is the gear ratio? I need a posi for my truck but also want to stick with gears low enough to pull something. If I remember that one has 3.07's.

Thanx again and looking forward to seeing you in Aug.

**Hart_Rod** · 05-05-2009, 09:59 PM

Quote:

Originally Posted by NPilot1975

Looks like you have pretty much dissected the whole thing. Just wanted to make sure you didn't forget about the two patches I need.
http://67-72chevytrucks.com/vboard/s...7&postcount=54

Also, did you end up selling the rearend and what is the gear ratio? I need a posi for my truck but also want to stick with gears low enough to pull something. If I remember that one has 3.07's.

Thanx again and looking forward to seeing you in Aug.

I've got your stuff too!!!!

I sold the posi. 95 days to go..... not that I'm counting,

.

R/

NPilot1975 · 05-06-2009, 09:17 AM

Honestly glad to hear you sold it. I will start a real search for what I am going to do with the rearend when I can actually work on my truck. Between my wife in school and my daughter, I have to sneak out to ever work on my truck. LOL

70Diesel · 05-06-2009, 07:21 PM

Do you still have the latch mechinism in the tailgate? I need the complete unit including the latch the locks the hatch to the tailgate. Let me know, thanks

**kev2809** · 05-06-2009, 09:28 PM

hey hart rod how's the bottom driver side cup under the tail light? I see there is filler around the light but is that corner good?

**Hart_Rod** · 05-06-2009, 09:54 PM

Quote:

Originally Posted by 70Diesel

Do you still have the latch mechinism in the tailgate? I need the complete unit including the latch the locks the hatch to the tailgate. Let me know, thanks

Do you have pictures of what you are talking about?

Quote:

Originally Posted by kev2809

hey hart rod how's the bottom driver side cup under the tail light? I see there is filler around the light but is that corner good?

It's good how much do you need?

70Diesel · 05-07-2009, 06:27 AM

I don't have a picture as the part is missing on my truck. I don't really no what it looks like, but I can explain the problem. My back window hatch does not lock down onto the tailgate. I have the strike part that is attached to the top window hatch, but I don't have the actual lock mechinism that sits down in the the tailgate. I think it is a combination part that works with the push bottom on the exterior to unlock the top hatch and unlatch the tailgate also. Any help?

70Diesel · 05-07-2009, 06:29 AM

Just noticed you sold the tailgate, most likely the lock went with it. Maybe you have one from another suburban? I haven't been able to find someone that makes these new.

**kev2809** · 05-07-2009, 07:41 AM

when I get off work ill get the measurements of that corner it looks like its gonna be from about the blue paint line, body line down, around the corner under the tail light. but I can check when I get off can I get a quote shipped to 77471

**Hart_Rod** · 05-07-2009, 08:58 AM

Quote:

Originally Posted by kev2809

when I get off work ill get the measurements of that corner it looks like its gonna be from about the blue paint line, body line down, around the corner under the tail light. but I can check when I get off can I get a quote shipped to 77471

Cool. Try to photoshop me the area you want so I make sure I get it all. I would guess shipping to be around $20-$25. LMK.

**kev2809** · 05-07-2009, 10:24 PM

hey I checked my truck and its the other corner that is messed up lol sorry for the hassle

67ChevyRedneck · 05-07-2009, 10:34 PM

Oh crap, that hole in the floor looks huge!

I hope shipping isn't too bad on that!

There is a greyhound terminal in Greenville if that would help!

SWILL · 05-08-2009, 10:05 AM

Intrested in the steering box, condition of it, and do you know off hand if it would work on a c20 ?

Thanks

SWILL · 05-08-2009, 10:06 AM

[QUOTE=SWILL;3299608]Intrested in the steering box, condition of it, and do you know off hand if it would work on a c20 ? Also a photo of it would be great

Thanks

shane

**Hart_Rod** · 05-08-2009, 11:08 PM

Quote:

Originally Posted by 67ChevyRedneck

Oh crap, that hole in the floor looks huge!

I hope shipping isn't too bad on that!

There is a greyhound terminal in Greenville if that would help!

Here are the pictures of the wheel lips or what's left.

Quote:

Originally Posted by SWILL

Intrested in the steering box, condition of it, and do you know off hand if it would work on a c20 ?

Thanks

I don't think there's a difference. This one is sold, but I have another one back in FL. These things are heavy and shipping would be high. Let me know.

Quote:

Originally Posted by kev2809

hey I checked my truck and its the other corner that is messed up lol sorry for the hassle

No worries.

Quote:

Originally Posted by 70Diesel

Just noticed you sold the tailgate, most likely the lock went with it. Maybe you have one from another suburban? I haven't been able to find someone that makes these new.

I've got one AND with a key. $45 shipped. Let me know.

67ChevyRedneck · 05-10-2009, 12:00 AM

Well, they don't look all that hot, do they? It looks like there's some decent areas. I guess cut out what you think is the "good" areas and toss em in with my floor and turn signal patches. Between what's there and the extra set of fenders I have, I should be able to fix my bed

**Hart_Rod** · 05-10-2009, 12:10 AM

Quote:

Originally Posted by 67ChevyRedneck

Well, they don't look all that hot, do they? It looks like there's some decent areas. I guess cut out what you think is the "good" areas and toss em in with my floor and turn signal patches. Between what's there and the extra set of fenders I have, I should be able to fix my bed

I must have missed the request for the floor patches. What were you looking for?

R/

04-25-2009, 11:46 AM	#126
CMACDONALD1 Senior Member Join Date: Jun 2007 Location: Red Deer Ab Canada Posts: 756	Re: Parting 1971 Suburban (NM) what kind of shape is the upper rear hatch in i've been looking for a decent one for about 5 years.Thanks __________________ 1966 427 biscayne with a 5 spd tremec on old school torque thrusts. 1972 Cheyenne Short Bed 1958 Apache short fleet 1980 Chevy short bed http://67-72chevytrucks.com/vboard/s...d.php?t=761005 1959 "Henry" http://67-72chevytrucks.com/vboard/s...d.php?t=670461 1966 Biscayne http://67-72chevytrucks.com/vboard/s...d.php?t=444419 1972 Suburban http://67-72chevytrucks.com/vboard/s...d.php?t=478828

04-26-2009, 12:50 AM	#128
CARZ1968 Bowties from Birth Join Date: Jan 2008 Location: Chester County PA Posts: 86	Re: Parting 1971 Suburban (NM) paypal sent __________________ 68 K10 Burb aka "da bomb" 72 C10 SWB Highlander 97 30th anniv. Z28 Conv 99 Chevy Crew 454 11 Traverse AWD

04-27-2009, 01:27 AM	#129
gmbpmidway Registered User Join Date: Feb 2009 Location: phoenix az Posts: 24	Re: Parting 1971 Suburban (NM) how about the passenger tail light area to quarter to 85050

04-27-2009, 01:34 AM	#130
gmbpmidway Registered User Join Date: Feb 2009 Location: phoenix az Posts: 24	Re: Parting 1971 Suburban (NM) how about the passenger tail light area to quarter shipped to 85050

04-28-2009, 01:02 AM	#132
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Parting 1971 Suburban (NM) You KILLED it! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

05-05-2009, 09:41 PM	#134
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Parting 1971 Suburban (NM) Looks like you have pretty much dissected the whole thing. Just wanted to make sure you didn't forget about the two patches I need. http://67-72chevytrucks.com/vboard/s...7&postcount=54 Also, did you end up selling the rearend and what is the gear ratio? I need a posi for my truck but also want to stick with gears low enough to pull something. If I remember that one has 3.07's. Thanx again and looking forward to seeing you in Aug. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

05-06-2009, 09:17 AM	#136
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: Parting 1971 Suburban (NM) Honestly glad to hear you sold it. I will start a real search for what I am going to do with the rearend when I can actually work on my truck. Between my wife in school and my daughter, I have to sneak out to ever work on my truck. LOL __________________ 1972 Blazer body...need to get a thread started for the rest of the story

05-06-2009, 07:21 PM	#137
70Diesel Registered User Join Date: Mar 2008 Location: Hanover, Ontario Posts: 4	Re: Parting 1971 Suburban (NM) Do you still have the latch mechinism in the tailgate? I need the complete unit including the latch the locks the hatch to the tailgate. Let me know, thanks

05-06-2009, 09:28 PM	#138
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,185	Re: Parting 1971 Suburban (NM) hey hart rod how's the bottom driver side cup under the tail light? I see there is filler around the light but is that corner good?

05-07-2009, 06:27 AM	#140
70Diesel Registered User Join Date: Mar 2008 Location: Hanover, Ontario Posts: 4	Re: Parting 1971 Suburban (NM) I don't have a picture as the part is missing on my truck. I don't really no what it looks like, but I can explain the problem. My back window hatch does not lock down onto the tailgate. I have the strike part that is attached to the top window hatch, but I don't have the actual lock mechinism that sits down in the the tailgate. I think it is a combination part that works with the push bottom on the exterior to unlock the top hatch and unlatch the tailgate also. Any help?

05-07-2009, 06:29 AM	#141
70Diesel Registered User Join Date: Mar 2008 Location: Hanover, Ontario Posts: 4	Re: Parting 1971 Suburban (NM) Just noticed you sold the tailgate, most likely the lock went with it. Maybe you have one from another suburban? I haven't been able to find someone that makes these new.

05-07-2009, 07:41 AM	#142
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,185	Re: Parting 1971 Suburban (NM) when I get off work ill get the measurements of that corner it looks like its gonna be from about the blue paint line, body line down, around the corner under the tail light. but I can check when I get off can I get a quote shipped to 77471

05-07-2009, 10:24 PM	#144
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,185	Re: Parting 1971 Suburban (NM) hey I checked my truck and its the other corner that is messed up lol sorry for the hassle

05-07-2009, 10:34 PM	#145
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Parting 1971 Suburban (NM) Oh crap, that hole in the floor looks huge! I hope shipping isn't too bad on that! There is a greyhound terminal in Greenville if that would help! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 05-07-2009 at 10:38 PM.

05-08-2009, 10:05 AM	#146
SWILL Registered User Join Date: Oct 2007 Location: Minnesota Posts: 24	Re: Parting 1971 Suburban (NM) Intrested in the steering box, condition of it, and do you know off hand if it would work on a c20 ? Thanks



Register or Log In To remove these advertisements.

05-08-2009, 10:06 AM	#147
SWILL Registered User Join Date: Oct 2007 Location: Minnesota Posts: 24	Re: Parting 1971 Suburban (NM) [QUOTE=SWILL;3299608]Intrested in the steering box, condition of it, and do you know off hand if it would work on a c20 ? Also a photo of it would be great Thanks shane

05-10-2009, 12:00 AM	#149
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Parting 1971 Suburban (NM) Well, they don't look all that hot, do they? It looks like there's some decent areas. I guess cut out what you think is the "good" areas and toss em in with my floor and turn signal patches. Between what's there and the extra set of fenders I have, I should be able to fix my bed __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

Register or Log In To remove these advertisements.