Project 69 Blown Gasser! - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

88fordf150 · 08-16-2015, 10:15 AM

Frame was covered in dust. Pushed it outside to power wash it off.

88fordf150 · 09-09-2015, 08:04 PM

Painted the bottom of the cab and mounted it on the frame for the last time! Paint is Inferno Red Metallic with 3 coats of clear ( camera makes it look more orange than dark red). I'm super happy how it turned out.

FRENCHBLUE72 · 09-09-2015, 08:08 PM

Is that a dodge color?

88fordf150 · 09-09-2015, 08:48 PM

Kirker Paint, not sure if its the same as Dodge?

**Dieselwrencher** · 09-10-2015, 09:01 PM

That turned out awesome!

88fordf150 · 09-13-2015, 12:36 PM

Quote:

Originally Posted by Dieselwrencher

That turned out awesome!

Thanks!

tommys72 · 09-14-2015, 12:13 AM

Looks good, I'd drive it!

88fordf150 · 10-17-2015, 07:58 AM

Finally painted the rest of the cab, except for the top, painting the top white and then clear with pearl.

jjzepplin · 10-18-2015, 08:20 PM

You are one good painter sir!

68Gold/white · 10-18-2015, 08:43 PM

Quote:

Originally Posted by jjzepplin

You are one good painter sir!

LOL, X2 on that!!! I've seen reflections in paint, but never from the bottom of the cab floor!!!

88fordf150 · 12-13-2015, 06:23 PM

Disassemble of my doors for sand blasting and skins.

Possmguts · 12-13-2015, 11:00 PM

This thing is gonna be so awesome.. Im tuned in foe the doors.. About to do mine.. please tell all you can and what brand of skins and bottoms you use. I desperately need the drivers side hinge area... I see you need some work around yours too.. what do you plan on doing there?

88fordf150 · 01-24-2016, 06:38 PM

Installed the steering column and moved it forward about 3" to give the driver a little more room. Also did a little work on the headers to get them to clear the steering shaft and welded up some 3" exhaust pipe to feed the Jones Chambered Mufflers. Oh, and changed the throttle linkage over to a cable pedal.

88fordf150 · 06-04-2016, 02:42 PM

It's been a long time since I updated this. Today I painted the top Pure White and epoxy primed some other parts. You may notice I installed a brake booster & master along with gauges and header wrap. Getting close to starting this thing up!

**cericd** · 06-04-2016, 06:10 PM

Lookin' good. I really dig this project.

88fordf150 · 11-13-2016, 10:10 AM

A few more pictures of my progress.

grass · 12-05-2016, 01:15 AM

So glad I found this build, I've been tossing the idea of doing a gasser build with my 68, but hadn't seen anyone try it yet. I love it and I think you just sold me on the idea.

88fordf150 · 12-05-2016, 05:03 PM

Quote:

Originally Posted by grass

So glad I found this build, I've been tossing the idea of doing a gasser build with my 68, but hadn't seen anyone try it yet. I love it and I think you just sold me on the idea.

Glad you like it. I tossed around the idea of going with a straight axle front but didn't.

grass · 12-05-2016, 05:08 PM

I have both a factory ifs front end and a straight axle out of a mid 40s Chevy truck. My truck was originally a 4x4 K20 so the straight axle will be pretty easy to do and I believe that is the route I'm heading in, but I'm sure the ifs would be a lot nicer to drive.

swamp rat · 12-12-2016, 01:03 AM

Door progress?

88fordf150 · 12-12-2016, 05:53 AM

Quote:

Originally Posted by swamp rat

Door progress?

Doors are on hold until spring, going in for Hernia surgery next week.

88fordf150 · 06-17-2017, 07:14 PM

Cut the door bottoms and had them sand blasted. Plan to spray some epoxy primer in the next few days.

**Dieselwrencher** · 06-19-2017, 03:27 PM

Nice work! I hope all went well with your surgery earlier this spring.

Threerun · 06-19-2017, 04:37 PM

That paint is gorgeous!

88fordf150 · 10-15-2017, 09:19 AM

Getting a little closer to being done. Covered the inside door panels with copies from old drag racing magazines to match the headliner.

08-16-2015, 10:15 AM	#126
88fordf150 Registered User Join Date: Nov 2009 Location: Michigan Posts: 474	Re: Project 69 Blown Gasser! Frame was covered in dust. Pushed it outside to power wash it off. Attached Images __________________ Brad handshoe

09-09-2015, 08:04 PM	#127
88fordf150 Registered User Join Date: Nov 2009 Location: Michigan Posts: 474	Re: Project 69 Blown Gasser! Painted the bottom of the cab and mounted it on the frame for the last time! Paint is Inferno Red Metallic with 3 coats of clear ( camera makes it look more orange than dark red). I'm super happy how it turned out. Attached Images __________________ Brad handshoe

09-09-2015, 08:08 PM	#128
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project 69 Blown Gasser! Is that a dodge color? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-09-2015, 08:48 PM	#129
88fordf150 Registered User Join Date: Nov 2009 Location: Michigan Posts: 474	Re: Project 69 Blown Gasser! Kirker Paint, not sure if its the same as Dodge? __________________ Brad handshoe

09-10-2015, 09:01 PM	#130
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Project 69 Blown Gasser! That turned out awesome! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-14-2015, 12:13 AM	#132
tommys72 Registered User Join Date: Jun 2012 Location: springfield mo Posts: 3,075	Re: Project 69 Blown Gasser! Looks good, I'd drive it! __________________ United States Marine Corps 2000-2011 Iraq and Afghanistan veteran Just living life now and enjoying it and my wife, daughter and son

10-17-2015, 07:58 AM	#133
88fordf150 Registered User Join Date: Nov 2009 Location: Michigan Posts: 474	Re: Project 69 Blown Gasser! Finally painted the rest of the cab, except for the top, painting the top white and then clear with pearl. Attached Images __________________ Brad handshoe

10-18-2015, 08:20 PM	#134
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,567	Re: Project 69 Blown Gasser! You are one good painter sir! __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

12-13-2015, 06:23 PM	#136
88fordf150 Registered User Join Date: Nov 2009 Location: Michigan Posts: 474	Re: Project 69 Blown Gasser! Disassemble of my doors for sand blasting and skins. Attached Images __________________ Brad handshoe

12-13-2015, 11:00 PM	#137
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Re: Project 69 Blown Gasser! This thing is gonna be so awesome.. Im tuned in foe the doors.. About to do mine.. please tell all you can and what brand of skins and bottoms you use. I desperately need the drivers side hinge area... I see you need some work around yours too.. what do you plan on doing there? __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8

01-24-2016, 06:38 PM	#138
88fordf150 Registered User Join Date: Nov 2009 Location: Michigan Posts: 474	Re: Project 69 Blown Gasser! Installed the steering column and moved it forward about 3" to give the driver a little more room. Also did a little work on the headers to get them to clear the steering shaft and welded up some 3" exhaust pipe to feed the Jones Chambered Mufflers. Oh, and changed the throttle linkage over to a cable pedal. Attached Images __________________ Brad handshoe

06-04-2016, 02:42 PM	#139
88fordf150 Registered User Join Date: Nov 2009 Location: Michigan Posts: 474	Re: Project 69 Blown Gasser! It's been a long time since I updated this. Today I painted the top Pure White and epoxy primed some other parts. You may notice I installed a brake booster & master along with gauges and header wrap. Getting close to starting this thing up! Attached Images __________________ Brad handshoe

06-04-2016, 06:10 PM	#140
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,156	Re: Project 69 Blown Gasser! Lookin' good. I really dig this project. __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

11-13-2016, 10:10 AM	#141
88fordf150 Registered User Join Date: Nov 2009 Location: Michigan Posts: 474	Re: Project 69 Blown Gasser! A few more pictures of my progress. Attached Images __________________ Brad handshoe

12-05-2016, 01:15 AM	#142
grass Registered User Join Date: Dec 2012 Location: Auburn, CA Posts: 61	Re: Project 69 Blown Gasser! So glad I found this build, I've been tossing the idea of doing a gasser build with my 68, but hadn't seen anyone try it yet. I love it and I think you just sold me on the idea. __________________ Chevy Pride



Register or Log In To remove these advertisements.

12-05-2016, 05:08 PM	#144
grass Registered User Join Date: Dec 2012 Location: Auburn, CA Posts: 61	Re: Project 69 Blown Gasser! I have both a factory ifs front end and a straight axle out of a mid 40s Chevy truck. My truck was originally a 4x4 K20 so the straight axle will be pretty easy to do and I believe that is the route I'm heading in, but I'm sure the ifs would be a lot nicer to drive. __________________ Chevy Pride

12-12-2016, 01:03 AM	#145
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Project 69 Blown Gasser! Door progress? __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

06-17-2017, 07:14 PM	#147
88fordf150 Registered User Join Date: Nov 2009 Location: Michigan Posts: 474	Re: Project 69 Blown Gasser! Cut the door bottoms and had them sand blasted. Plan to spray some epoxy primer in the next few days. Attached Images __________________ Brad handshoe

06-19-2017, 03:27 PM	#148
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Project 69 Blown Gasser! Nice work! I hope all went well with your surgery earlier this spring. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

06-19-2017, 04:37 PM	#149
Threerun Registered User Join Date: May 2017 Location: Helena, MT Posts: 80	Re: Project 69 Blown Gasser! That paint is gorgeous!

10-15-2017, 09:19 AM	#150
88fordf150 Registered User Join Date: Nov 2009 Location: Michigan Posts: 474	Re: Project 69 Blown Gasser! Getting a little closer to being done. Covered the inside door panels with copies from old drag racing magazines to match the headliner. Attached Images __________________ Brad handshoe

Register or Log In To remove these advertisements.